If you need to highlight a large area of a shopping complex or institution, a large office building, hotels, schools or university and while saving, the ideal solution for this purpose will be LED suspension lamps. The transition to LED lamps in any room will be not only one of the most affordable ways to save electricity, but also a good opportunity to protect the environment. Today you can find LED lamps of any form and modification.
When repairing household premises or office planning, lighting design will be played. For example, if you decide to make a suspended, drywall or stretch ceiling in your room, then the LED lamp will be the only right solution for the organization of lighting. Such a lamp, possessing the light dispersion angle to 180 °, able to provide soft, smooth light in the lobby, corridor, office or any other place where you decide to apply it. The effect of flicker in such a device is completely absent, i.e. there will be no vision load. However, for general human health, LED pendant lamps for the ceiling are also absolutely safe, as they are made of environmentally friendly materials without the use of any harmful substances.
Incredibly thin lamp housing and elegant exterior design capable of decorating almost any interior. To improve its own space with maximum comfort, you can install it, for example, in your bedroom or living room, which will allow you to carry out a wide variety of brave design solutions.
Such a lamp has high energy efficiency, which makes it possible to significantly reduce the cost of lighting. This is especially important when it comes to major trading or exhibition space using a large number of built-in LED lamps.
In addition, the high operational resource of the service of such a device for many years will eliminate issues related to its replacement and service, and therefore additional costs.
In any modern house of account, the second payment is held by the second, if not the first place in the amount. Therefore, the decision to acquire LED ceiling lamps will allow not only to significantly save on electricity costs, but also meet all sanitary standards and environmental requirements. Such LED lamps do not emit ultraviolet radiation and do not contain mercury. You can also additionally save on the use of air conditioning systems in summer, since the lamps do not allocate heat at all. LED more durable than any other lighting source. It is resistant to heat and cold, vibrations and shocks. Working temperature is practically unlimited. In addition to domestic purposes, LED lamps can be used in office space and educational institutions, in warehouses, any production facilities.
The suspended lamp on the LEDs is recommended to be used only in rooms that have sufficient area, as well as a greater height of the ceilings. This is necessary due to the small design features of these models: they are installed only on suspensions or special cables. Therefore, the main direction of the use of these instruments is large premises, railway stations, airports, large warehouses, office centers, parking for cars.
It is worth noting that the lamps for the ceiling on cables or special suspensions can be used in organizing high-quality lighting, for example, in houses or apartment of an apartment building. This is possible only under one condition – the size of the room must be appropriate. The height of the ceiling must be at least three meters.
Luminaires on special cables for residential premises have a significantly more beautiful and original design. Most often these are single-vapor products, but sometimes they are represented by linear species.
These both options are mainly used for high-quality lighting any zone in a house, for example, a dining room.
The design of products on the cables to its users allows you to highlight only the room that has a ceilings sufficient for height suspension. If, under such conditions, apply standard overhead luminaires for the ceiling, then with the same power of light it will be very little and will have to use products with greater intensity of the light stream.
This is one of the reasons for creating suspension products for lighting.
The dimensions of some lamps fully correspond to their luminescent counterparts, but linear type.
All suspensions in such a design play another role – this is the fastening of the lighting device. On them to the lamps are supplied for power cable. The number of LEDs in different models can vary significantly. It all depends on the main dimensions of the device and on which level of light flow is needed for sufficient lighting.
It is worth noting that the probability of adjustment is provided in separate models. You can independently choose the intensity of the glow. It is necessary to pay attention to the fact that such linear luminaires for the ceiling are located at a considerable height, and therefore the switching of all modes of operation is remotely.
Much less often can be found models with a sensor that responds to movement.
If your plans include the installation of lighting devices on LEDs, then the key selection parameters should be taken into account:
- Power of the lamp. This feature is relevant for all types of devices.
- Main light flow. This is another parameter for which you can find out the brightness level.
- A variety of color temperatures. Determined for production, as well as office premises. Many specialists strongly recommend choosing models with neutral, as a last resort with cold light.
- Color reproduction index. Devices with LEDs are mainly characterized by a standard indicator in 80-85 points. The permissible limit below which cannot be lowered, you can call 80 points.
- Select type diodes. This indicator affects the quality level of illumination.
In addition to these major parametric indicators of emitters, you need to pay close attention to the main features of the design and functionality of the product.
It is worth noting that a significant role is the dimensions of the lamp, as well as the angle of dispersion of the light flux. If you take into account the fact that linear models on the suspensions are installed only on the surface of the ceiling, the last parameter is sufficiently important, because it is the angle that allows you to find out the exact dimensions of the area for lighting. Many users choose round, bell or square plaffones, which not only excellently dispel light, but come to all interior styles.
An important point is also supply voltage. Basically, for high-quality operation of light sources, in which diodes are used, the driver and power supply are used. These two instruments guarantee the connection of the lighting device to the power source, which has a voltage of 220 V. In warehouses, this is especially important.
It is best to choose models that can withstand significant fluctuations in changed voltage in your main electricity network. Determine these products are quite simple. In any documentation for the device, the manufacturer necessarily indicates the entire allowable range of voltage fluctuations. They have a special ring that regulates all these troubles. Some of the linear luminaires can function without losing their quality lighting at a voltage of only 100-240 V.
The main operating conditions of many devices are quite complex (excessive dusting of the room, an increased humidity, a very aggressive environment for work), therefore, it is another significant parameter for the protection of products. For office buildings, it is permissible to apply IP23 or IP20. In other large rectangular premises (huge production sites, large and small warehouses, various utility rooms), it is always better to use models that have a degree of protection more IP30.
Detached group – these are diode lamps that are intended for operation in sufficient hard conditions. These devices most often have approximately the same dimensions as not entirely protected analogs. The degree of protection of these lighting devices is significantly higher than IP76.
In residential premises, suspended ceiling lights in the style of high-tech or, for example, modern.
For these style directions, lamps are provided for elements of different types:
- Cables or special chain apply for suspensions.
- Plafones that are attached to single-vapor lighting devices.
- Linear products that dissect light well.
The design of the lighting device must be selected, considering what the light you need to get, for example, directed or scattered. For directional light, you must purchase an open form of the ceiling. For scattered fit closed model.
Materials must fully comply with the interior of your room.
Read more about suspended LED lamps you will learn from the following video.