LED tape power 24 V

LED tape power 24 V

LED backlight in recent years has proven itself as a good advertising product that contributes to the attraction of buyers’ attention. In addition, lighting tapes are used in domestic purposes. The main power of such devices is 12 V, but other models on 24 V are becoming increasingly.

LED tape power 24 V

Peculiarities

Diode Tape 24 V has certain advantages over less powerful analogues. These features directly affect the method of work, as well as on the scope of application.

  • Current consumption. The meaning of this advantage is that 24-volt models are used twice and less current at the same power. This allows you to connect communication through the wires of a smaller diameter, which has a positive effect on the convenience of mounting and reduces the total weight of the design.

The current loss is also reduced, so that you can create a longer lighting chain without additional power sources.

LED tape power 24 V

LED tape power 24 V

  • Brightness. This item concerns not the power of light, as can be assumed, and the stability stability between different areas of LED-ribbon. Models on 12 V have a full brightness first, but closer to the end it goes a little, because of which the visual component may suffer. To this not happen, it is necessary to carry out an additional copper wire that complicates the chain.

And 24-volt models of such a shortage do not have.

LED tape power 24 V

LED tape power 24 V

  • Control. The most extensive lighting systems are best monitored through dimmers and other devices with which you can change the power, as well as switch the LED modes. The signal on 24-volt models is stronger than 12 V, so there is no need to embed special amplifiers to improve the quality of the connection.

If we take into account the fact of the first point, you can state that dimmer with tapes of such a voltage can control the chain with a capacity of 2 times more.

LED tape power 24 V

LED tape power 24 V

LED tape power 24 V

  • Reliability. Due to the prevalence of models by 12 volts, they produce a large number of manufacturers, among which there are those who have proven themselves from the best side. This may affect the fact that the buyer will acquire poor-quality goods. While 24-volt LED tapes are more rare, but they are represented by fairly well-known companies that have considerable experience in the manufacture of similar products.

The wider and richer assortment, the higher quality and reliability indicators are ready to provide a manufacturer.

LED tape power 24 V

LED tape power 24 V

LED tape power 24 V

Views

Tapes on 24 V have a certain classification, which can distinguish between their applications. The first class of products is designed to create large-scale lighting, due to which the density of the LED is quite low. The average distance exceeds 1 cm, and the total number of ribbon meter is about 60 pieces. At the same time, due to its reliability and efficiency, these models spread the light smoothly and on all parts of the tape.

There is another type of product that is best suited for use on short and small objects. As a rule, LEDs in this case are grouped tight to have the most attractive effect. Their number on one meter ribbon can be 200-240 pieces. It is important to say about the multiplicity of one segment, which can be separated from the main length. This indicator can be both 3 and 6-7 LEDs.

This characteristic affects how diverse you can use the tape depending on the situation.

LED tape power 24 V

LED tape power 24 V

Manufacturers create special models with different general lengths. The standard indicator is 5 meters, but there are instances and 30 m. Among other types of 24-volt ribbons, you can allocate classes in the level of protection. First of all it concerns those profiles that are suitable for the product. There are aluminum analogs that are well bent and provide basic protection. Anodized alloy is quite durable and well suited for different types of operation.

LED ribbons have such an indicator as a class of dustlessness, which is of paramount importance before buying. If you plan to use indoor products, IP20 is already enough, which does not protect from water in any way, but prevents small objects with a diameter of 12.5 mm. When the sign is on the street, the most preferred option will be the protection class IP65 or IP67. They both are a dustproof design. In the first case, it can only get water jets. In the second version, the product can be fully immersed in water for a while before half an hour.

The amount of water falling into the device is not enough to negatively affect the operation of the LEDs.

LED tape power 24 V

LED tape power 24 V

It all depends on the weather conditions, since snow becomes the main problem, which can constantly be located on signs, banners and other lighting objects.

The number of colors and their diversity depends on the manufacturer. As mentioned earlier, 24-volt ribbons are manufactured mainly by well-known companies that can offer to the buyer the widest set of shades.

Standard White, as well as beige, light blue and similar little cheaper due to their popularity.

LED tape power 24 V

LED tape power 24 V

Choice

Selection of LED tapes of such power consists mainly of situational sides, which belong to the choice of any similar product. First of all it is dimensions. Manufacturers make models of different widths and length, so select based on the lighting volumes that you need. Pay attention to those characteristics and types of tapes, which were mentioned above.

As for the price, most producers it is the same and depends on the specific parameters of the LEDs, their size, the frequency of placement and other traits of the model.

LED tape power 24 V

LED tape power 24 V

Do not forget to learn reviews and other material that will help you form your own opinion regarding product quality. It happens that as a whole, the manufacturer has a good manufacturing level, but the specific series of ribbons are not fulfilled and have some drawbacks.

And also do not forget about the instructions in which you can find more detailed characteristics, for example, the working temperature range or accurate current consumption depending on the length of the ribbon.

There you can also find information about connecting the device to dimmer, which is more efficient on 24-volt models, rather than on analogs in 12 V.

LED tape power 24 V

LED tape power 24 V

How to connect?

Installing this type of LED tapes does not differ from any other types. First of all, it is necessary to choose the right profile on the basis of the features of lighting. There are overhead, suspended, angular options. Before holding pastries, make sure that you secured the profile at the required height and in the correct option. Then cut a ribbon of the same length as the profile. Focus on special lines for which you can pruning.

On the tape there are double-sided adhesion, which is the main way to fasten the product into the side planner of the profile. If you glued the LEDs incorrectly, then the reuse of such a tape is not recommended, as the physical characteristics of the drawing of materials deteriorate. After the correct arrangement of the tape in the profile can complete the installation by fixing the cover / top, if it is provided by the design.

The next step is to connect the tape into the battery item. It is carried out by connecting wires to the transformer.

It is worth saying that before this it is better to turn off the power grid system so that it does not arise the differences and failures.

LED tape power 24 V

LED tape power 24 V

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment