Self-heading hoses for watering: features, types and tips on the choice

In preparation for the new country season for many gardeners, the question of replacing and acquiring an inventory for its sites is becoming topical. An important aspect is the hoses for watering, for which active wear or chances are characterized. However, in the conditions of modern scientific progress, this type of inventory is presented in a wide range: you can choose both ordinary rubber, corrugated, with special nozzles and quite new self-moving models. It is about them that will be discussed in our article.

Self-heading hoses for watering: features, types and tips on the choice

What it is?

Such a hose for watering stretching independently has a special nozzle. It does not cause difficulties in operation, however, has enough advantages. For example, water pressure can be controlled using a special stupor. In addition, the duration of working with the device can be quite long, and it will not require special efforts from gardener. Users note that in the process of irrigation, you can use even children who help their parents with enthusiasm.

Such nozzles can be used both for watering gentle and fragile landings and for trees. It can work in 5 different modes, each of which is used as needed. You can water the plants with one thin flowing, separating water pressure on 3 jets, and using different amounts of water.

Also, water can be sprayed by the type of shower and create an effect of spraying, which is obtained in the case of a partial clamp of the hose. In addition, if necessary, you can enable standard mode.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Most of the gardeners are recommended for use and perfectly respond to the work of such multifunctional nozzles. With a special desire, it can, of course, can be placed on a conventional rubber hose, but it will not be easy. In addition, specialists are not recommended to do so. This is due to the fact that simple hoses are usually made of not too high-quality material, which threatens a rather rapid gap of rims. It will be necessary to take into account when working, showing maximum accuracy, respectively, the process of irrigation will delay and will not be so comfortable for gardener.

To date, the company Xhose is very popular among the town halls. She specializes in the release of self-moving hoses. Products can be up to 30 meters and even exceed this mark, lengthening during operation.

According to consumer reviews, the hoses of this brand are very convenient (when using their hands, they do not suffer from severe water pressure), and also equipped with switches for overlapping the jet. It helps, if necessary, remove the nozzle and use the product as standard.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Another undoubted plus hoses – the possibility of their splicing. If you take several products, you can combine, achieving the required length. In addition, there is no problem with the fixation of high pressure wipers and splitters.

Nuances of manufacture

The material from which the spokeying hoses are made is natural latex. He was chosen because it is capable of cope with significant loads, and is also very elastic. This material has excellent quality, which allows it to withstand various water pressure without prejudice to the state. Such hoses can be used for several seasons, which is very economical and cannot but please the gardeners.

Outside the self-satisfying hose looks like a harmonica. Production material is not afraid of external influences, shocks and possible rates, which avoids product damage. It is at the expense of such a shell, the product without problems and the most quickly folds and decides that it has become its feature. Bend or incomplete disassemble will not interfere with water to pass freely, which is also a distinctive nuance.

Self-heading hoses for watering: features, types and tips on the choice

The manufacturer’s company, more expensive by its reputation, is able to provide on this product a long warranty, because the material from which the hoses are made are practically incredible external influences – it is extremely difficult to damage it.

The quality product is able to listen to the gardener of several decades, without requiring repair or replacement.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Advantages

In order to decide whether a gardener is needed to give a self-grafflying hose, it must have a complete picture of the product, take into account his advantages and disadvantages. According to the Internet reviews, the model has many advantages that should be reached.

The main feature is the ability of the hose to raise rapidly in length at the time when water flows. In a dry state, it is quite compact, it is convenient in storage and does not occupy a lot of space, but in the process of work it is capable of becoming 3 times more. As soon as watering is over, the product will automatically be squeezed.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

It is impossible not to note such moments as lightness, flexibility and elasticity.

The hose may have a length of 7 to 75 meters, while not twisted. Also products are connected using an adapter and can become much longer. The sprayer has several modes, which allows it to use it for irrigation of absolutely any plants: from the most fragile to strong. In addition, the price of the hose is sufficiently available.

Self-heading hoses for watering: features, types and tips on the choice

Flaws

If we talk about minuses, their relatively little. Rarely rare gardeners with a negative respond about self-moving hoses. However, the sake of objectivity should be noted that there are such opinions. Among the disadvantages, consumers identify that not all surfaces are suitable for uniform increase in the product. The maximum effectively the hose is stripped on a flat surface.

In addition, there is a bad portability of the low temperature regime. Also additional clamps may not match the sizes of the hose. However, experts note that such moments may only take place in the case of working with low-quality products, the manufacturers are not allowed.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

How to choose?

When buying a self-heading hose for watering, first of all, the gardener needs to decide which the length of the product is required. On the shelves presented hoses in the bay and flatness. In the first case, manufacturers offer options at 15, 20, 25, 30 and 50 meters, in the second – length can be defined independently. Also an important role is played by diameter.

Experts recommend not to chase at low cost, as in this case it is easy to run into fake and acquire a slight-quality product. Simple single-layer varieties also do not boast long service life. If the pump for watering work is not planned to be applied, you can save and not take models with increased working pressure.

Another important clarification – with an increase in length, the diameter of the product should increase, otherwise it will function defective. Hoses with a semi-leaf diameter should be no longer 15 meters. If water pressure is weak, on the contrary, a small indicator will be a winning option.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Tips

If the garden plot has impressive sizes, for the convenience of users it is recommended to connect short hoses to the stationary wiring, which will help save time and simplifies the work. In order for the product to light up as long as possible, it is not necessary to leave the liquid inside the work, and also leave it under the right sunlight.

So that the hose function optimally, it is necessary to provide sufficient water pressure. It is 2-7 atmospheres. With a long irrigation period, the hose will gradually decrease, and this is a normal phenomenon in cases where the pressure deviates from the index in 6 atmospheres.

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Self-heading hoses for watering: features, types and tips on the choice

Despite the fact that initially gardeners did not trust this novelty, recently they begin to use it more and more active, assessing indisputable advantages and high functionality. Increasingly, consumers refuse the usual standard rubber watering hoses, providing their comfort and convenience.

Review of the self-grafflying hose for watering Magic Hose is waiting for you in the video below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment