Inflatable pool for giving: how to choose and install?

Inflatable swimming pools for cottages are in sustainable demand among the population and allow to solve the issue of arrangement of artificial reservoir for the summer period. The presence of an individual bathing reservoir completely eliminates the risk of infectious diseases, controlling organoleptic and bacteriological indicators of water. How to choose an inflatable design and install it on the plot, tell me in our article.

Peculiarities

The inflatable pool for the country area acts as an excellent alternative to the frame tank, allowing you to get a full-fledged swimming place for a little money. Such models do not require earthworks and concreting, the more profitable differ from the pools dug in the ground. As a material for the manufacture of inflatable models, a multilayer PVC film is used, the strength of which depends on the thickness of the separated layers, as well as on their total.

The walls of the pool are additionally reinforced by a polyester grid, which allows them to withstand quite high loads. Models intended for young children have an inflatable bottom, and more volumetric structures are equipped with filtration system. Products with a height of the walls of 91 cm and are more equipped with comfortable P-shaped stairies – stairs, and serious samples that accommodate a large amount of water are equipped with fixtures for cleaning and washing – a special skimmer, a saccker, a telescopic hose, and a substrate under the bottom.

As for the water drain method, then Most models are equipped with a drain valve compatible with garden hoses with a diameter of 13, 19 and 25 mm. This allows you to reset water into a drainage pit or sewer or use it for watering the beds, trees and bushes. In some pools, the valve is missing and for draining water from the tank use the pump.

Children’s shallow pools are emptied by tipping.

Advantages and disadvantages

The popularity of inflatable pools due to a number of positive properties of these lungs and universal products:

  • A simple device of the reservoir provides easy installation and allows you to cope with this in a short time without attracting specialists;
  • In comparison with frame and dug basins, inflatable models are relatively inexpensive, which only increases their consumer accessibility;
  • In the compact condition, the pool is quite compact, which facilitates its transportation and storage;
  • A huge range with a large variety of sizes and shapes allows you to choose a model for every taste;
  • Inflatable models are characterized by high mobility, as a result of which at any time can be merged and moved to a new place.

butAlong with a large number of obvious advantages, flaws of inflatable models still have. Related to them High likelihood of random punctures, the vulnerability of budget models before exposure to ultraviolet and the need to regularly pumped the sides due to air leakage through the valves. In addition, when ploting the pool, it is often difficult to remove a large amount of fluid that, in conditions of a small country area, it is often a problem.

Weightful disadvantage of inflatable structures is the impossibility of full-fledged swimming, which is due to the limitations of their size and depth.

What happens?

The classification of inflatable pools for the cottage is made according to the type of design of the sides and the presence of the roof. According to the first criterion distinguish 2 types of models.

  • Products with fully inflatable walls, which are filled with air all over height.

  • Self-level samples in which only the upper tube is pumped through the perimeter of the reservoir. When filling such a pool with water, the inflated pipe pops up and places the walls of the reservoir, which, like the bottom, are not filled with air.

On the second feature – the presence of a roof – inflatable pools are divided into open and closed. The first do not have roofs and better warmed in the sun.

The second is equipped with a protective awning, and sometimes walls, often represent real pavilions. The roof does not allow the garbage and precipitation into the water, which allows water replacement much less. Such models often have a sliding roof, which makes it possible to remove the awning and heat the water under the sunny rays. In addition, in the pavilions pools, you can swim in windy and cool weather, and in the autumn-spring period, use them as a gazebo.

Forms and sizes

The modern market offers inflatable pools in a wide range of sizes and shapes. Round models are most popular in which the water load on the walls of the reservoir is distributed more evenly than in rectangular or asymmetric bowls. In addition, round-shaped pools occupy less space and more harmonious fit into the surrounding landscape. In addition to round and rectangular shapes, there are square, oval and polygonal copies.

As for the sizes, the models have different height of sides, length, width and capacity.

  • So, for the smallest swimsuit for ages up to one and a half years Tanks with the height of the walls up to 17 cm. Such mini-reservoirs quickly and easily inflated, warm well and without problems merge under a tree or bush.

  • Models with height of sides up to 50 cm Designed for children from 1.5 to 3 years. They have a bright children’s colors and an inflatable bottom.

  • Pools with walls from 50 to 70 cm Designed for children from 3 to 7 years, often equipped with a slide, waterfall, rings and a mesh for ball games.

  • Tanks height from 70 to 107 cm Strecky and designed for schoolchildren from 7 to 12 years.

  • Large models with sides from 107 to 122 cm are calculated for adolescents and adults. Such basins always have a staircase, are often equipped with filtration, pump and accessories for the bowl. The walls of such products are equipped with rubber rings, for which, with the help of rods, the pool is tied to the knives driven into the ground. Such insurance increases the overall stability of the design and does not allow tipping of high and narrow tanks.

As for the volume of basins, their capacity directly depends on the dimensions. Thus, a model with sides of 76 cm and a diameter of 2.5 m can accommodate about 2.5 tons of water, and in large samples 120 cm height can be placed to 23 tons.

How to choose?

When choosing an inflatable outdoor pool It is necessary to pay attention to a number of important points.

  • If the pool is purchased for a child up to 3 years, then it is better to buy models with an inflatable bottom. This will prevent painful ground strikes in case of a random fall of the kid. As for the sizes of the children’s reservoir, then for one child there will be a diameter of 1 m, two kids will need a 2-meter product.
  • When buying a pool, you must pay attention to the number of PVC layers and the presence of reinforcement. And also you should choose products of well-known manufacturers, such as Chinese Intex, German Future Pool, French Zodiac and American Sevylor.
  • It should also be found on the water drain method. It is better to purchase models equipped with a drain valve with the ability to attach a garden hose.
  • It is desirable that the product is equipped with Repair Kit, consisting of rubber glue and patchwork.
  • If the tank is planned to be used as a spa pool, It should be closed to the jacuzzi models equipped with hydromassage. In order to avoid clogging, such samples should only work with filtered water, which will require the purchase of a water filter.
  • Regarding the value of pools, The budget children’s model of the Intex brand can be purchased for 1150 rubles, while the adult pool of the same manufacturer will cost 25-30 thousand. Products of German, American and French factories are two or three times more expensive than Chinese samples, however, they are characterized by higher strength and long service life.

How to install?

Installation of a children’s inflatable pool does not represent any difficulties and can be made even a teenager. However, to the placement of an adult tank, it is necessary to approach more thoroughly, carefully selecting the place of installation and conducting a number of preparatory activities.

Choosing a place

When choosing a plot for an inflatable pool, you should give preference to wind-protected places located away from deciduous trees. The playground must be absolutely smooth, without slope and irregularities. An excellent solution will be the placement of the reservoir near the beds with vegetables, where, if necessary, you can at least partially merge water. It is advisable to choose solar open spaces on which water in the bowl will warm up natural.

When choosing a place for a children’s pool It should be borne in mind that the tank should be well visible from all points of the site, as well as from the windows of the house. This will allow constantly bathing children in sight, thereby ensuring their safety. Above the pool should not be linen rings and electrical wires, and under it – underground systems of water supply or sewage.

The surface must be earthen, Since asphalt and gravel areas, due to its roughness, are not suitable for installing inflatable structures. In addition, the selected place should be “clean”: installation of an inflatable pool on the soil, which has been processed by chemicals, is prohibited.

What to put?

After the place is defined, it is necessary to clean it from stones and garbage, after which the arrangement of the substrate. As a litter, tarpaulin or PVC film are used 3-4 times. Such a gasket will serve not only the protection of the bottom of the pool from damage, but also act as a heat-insulating layer that does not allow water to quickly cool from the ground.

Installation rules

After the preparation of the plot for installing the pool is neatly transferred to the installation site and carefully smash. Then a manual or foot pump influence the side, and if necessary, the bottom of the tank. Use the pool pumping compressor is not recommended, as this can lead to pumping and cause the discrepancy of the seams.

The final stage of the launch of the pool is its filling with water. For children’s samples, it is recommended to use drinking water that has passed through the filter. For adult models, river water is suitable, which is desirable to be decorated with special drugs. However, after such a treatment, it will be impossible to drain it on the bed and it will be necessary to take care of an alternative way to remove fluid. Chemically treated fluid can be changed once a month, ordinary tap water requires replacement every two or three days.

In addition, daily water is required to top up to the desired level, since under the sun it actively evaporates or flies when bathing.

Features of care

In order for an inflatable pool to serve as longer as possible, It is necessary to care for him.

  • Daily with a special cuckoo It should be removed from the surface of the water of insects, fallen leaves and another mechanical trash.
  • At night, the reservoir is recommended to cover with a film, And in the morning, with the advent of the first sunlight, open for warming up.
  • When detecting leaks It is necessary to drain the water, blow the chambers and to dry off the damaged area. Then you should cut off the patch of the desired size, apply glue and flick the hole. You can use the pool in 12-24 hours (depending on the glue brand).
  • At the end of the swimming season The pool is drained, washed thoroughly with soapy water, rinsed from the hose and lay out on a sunny place for drying. Then the product is compactly folded and removed for storage in the case.
  • Store inflatable pool need in a dry place at room temperature away from heating and open fire devices. It is categorically forbidden to leave the product in an unheated room: low temperatures adversely affect PVC and cause it fragility.

With careful use and proper storage, the inflatable pool is able to serve 5 years or more.

About how to choose inflatable pools for children, look in the following video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: