How to make a cultivator with your own hands?

To facilitate physical labor on household plots, people constantly come up with various adaptations. One of these is a cultivator. The advantages of this unit are obvious. And it can be used to buy fully ready, so and collect yourself from what is at hand. For this, drawings will be required, some details and advice of those who have already built such adaptations.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

Device

Lightweight hand cultivators enjoy the greatest demand among farmers and summer residents. As a rule, they weigh about 20 kilograms, differ in small sizes and high performance. Cultivator is able to loosen the land, remove weeds, cut forward plants. It is even used for fertilizer. With this unique adaptation, not only landing is simplified, but also the process of plant care.

Of course, the motor-block in power is more good, but for such small tasks the cultivator is better, as it has greater maneuverability and less weight. In addition, it is great for sites with a difficult terrain or in hard-to-reach places.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

The work of cultivators largely depends on what cutters go to it complete, because they are precisely the loosening and a number of other operations. Among the workshops on manual models are often used as follows:

  • for loosening land;

  • for cutting;

  • for emphasis;

  • For doing furrows under the sowing;

  • To break down a strong earthen crust (special needle disc);

  • For feeding plants (with dispensers).

When it is clear which cultivator is necessary under certain tasks, you can choose from which parts it will consist. This can help the drawings of the homemade device. The main part of the cultivator is the engine that can be electric or internal combustion. It is best to give preference to reliable and durable installations. If necessary, you need to provide a cooling system, as it does not always have a built-in.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

For control of the torque of the engine corresponds to the gearbox. This part reduces turnover, and also contributes to the operation of the power take-off shaft. As for the frame and portal for attachments, they can be made from what is happening at hand. For this, even the simplest two-wheeled car will be used. The main thing is to think about the scheme in advance to present well, how and where individual elements will be placed.

Convenience and the ability to adjust are important parameters for the control lever. It should be not only convenient, but also adjustable.

As a rule, the handles are supplied with all the elements that are responsible for managing the device. Therefore, it is important to present well in advance how the unit will look as a whole, so that it is convenient to use it.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

How to do?

Handmade cultivator can be quick and easy to make it yourself. And you should not fear that they will need special skills, materials or tools – in most cases the unit can be collected from what is already on hand.

If you find detailed instructions, you will need no more than 20-24 hours. The homemade cultivator is also convenient because it is easy to repair or improve it.

The simplest model of the universal assistant is a model similar to “Tornado”. Such cultivators work without fuel and electricity. All work is performed by their own efforts and tools. Such a device is made from the pitch, with the hammer bend the teeth so that they look like a brunetch. Then the simplest handle from the shovel is attached, a plastic pipe is put on top of it, all this is fixed using the isol.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

Depending on which cutters are used, cultivators may differ. For example, there are needle models, which are a kind of rotary asterisk. They perfectly cope with loosening and extermination of weeds. Even more functions allows you to perform a mounted frying cultivator, its cutter resembles “goose paws” with its own view. Such an unit can loosen, cut the weeds, combing the remnants of plants, level the surface layer of the earth.

Make a cultivator today is very simple. For this you can use many devices. For example, the gardeners make assistants from the Bulgarian, a bicycle, an old washing machine, a drill and even a snow blower.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

From Bulgarian

Burglary Bulgarian can be successfully converted to a cultivator. Of course, such a tool will not be able to handle large areas, but it will help to cope with the country area or even a greenhouse. The main advantages consist in its environmental friendliness, low weight and convenience of operation. Works such a device from electricity.

To collect an aggregate, you will need a welding machine, as well as at least minimal skills to work with it. Materials for manufacture will serve:

  • Engine from washing machine or drill;

  • Reducer from the Bulgarian;

  • chain and “asterisks” with a small bike;

  • bearings;

  • Cultivator cutters that are made from the springs of the car;

  • wheels;

  • corners;

  • Cable for about 50 meters long;

  • tin to protect the motor from falling into it.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

The design will be a metal frame with two wheels. In its center there will be an engine that must be connected to the cutters. Rotation will be provided with cycling “stars” and chains. As for cable with a starting mechanism, it is attached on the handles.

How to make a cultivator with your own hands?

From Trimmer

Ordinary gasoline trimmer for the garden, thanks to the agility of the hands, can easily turn into a small cultivator. For its manufacture, the following materials will be needed:

  • trimmer (necessarily worker);

  • Garden forks;

  • Tube from Steel.

Metal more convenient to handle with the help of grinder, welding and hand tools. The working part will be a rod from forks, only curved and flattened. Before working, they must be sharpened by a disk with low abrasiveness. Cutles must be removed from each other at an equal distance using a round member with a diameter of 10 cm. Ideal if the cultivator will be equipped with three mills.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

From chainsaws

Chainsaw is also suitable for the manufacture of the cultivator independently. The engine is best suited from chainsaw “Friendship”. Creating a device based on chainsaws will require, in addition to the engine, another number of materials:

  • starter;

  • muffler;

  • fuel tank;

  • chain (bicycle or light motorcycle);

  • shaft;

  • reference wheel;

  • Metal corners or steel tube;

  • Wheels of suitable diameter.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

From the tools it is desirable to have a grinding machine, a welding machine, horn keys (set), passatia. First you need to collect a frame. It is best to do with contact welding or bolts. Then you need to fight crossbar, fastening frames. It is on them that the engine is installed from chainsaws. The lower part of the frame is equipped with a shaft with wheels, an asterisk and chain. The shaft with cutters is made as a working part, the fastening of which is performed by square metal sheets.

How to make a cultivator with your own hands?

Rotary

Discs are a good basis for the cultivator. However, making a rotary device is very difficult, especially if there is no special skills for this. From the details you will need:

  • discs;

  • brackets;

  • axis;

  • sleeve;

  • stock;

  • pen;

  • metal pipe.

To the bushings that are fixed on the axis, you need to fight discs. With plinth, the axis is fixed in brackets. Through a large bracket, a pipe with handles and crossbar should be held. In a small bracket, it is necessary to screw the strain, which stands on the crossbar. Such a cultivator is distinguished by reliability and practicality.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

From drill

From a drill, you can make an excellent cultivator, which will easily cope with many stern countries. You can make such a device from:

  • drill (working);

  • steel rod (to compress the cartridge drill);

  • cut.

The tools will need a welding machine, emery and Bulgarian. The shaft in such a device will be a rod with a diameter of 10 mm. It will transmit rotation from the engine to the cutter. This process is carried out through the cartridge.

Cutters can be made from metal sheets, which is suitable for problem lands. Also comes from metal 10-15 cm long, and width – 1 cm. Using the grinder, they turn into rectangles, which are then bent at an angle of 90 degrees. Next must be sharpened cutters on both sides and welcome them to the rod.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

From bike

Most often dackets make a bike cultivator. This design is distinguished by simple installation and lack of welding. From the tools only the Bulgarian and a set of keys will be needed. You can collect this unit from:

  • bicycle frames;

  • wheels from the bike;

  • canvas from the two-handed saw;

  • Pipes for handles.

To a piece of frames, it is necessary to attach the cutting part of the saw. It can be replaced by a plow or another surface on which there are sharp spikes. Handles of the cultivator are made longer than the bicycle steering wheel and fasten motionless to the frame with bolts. The wheel is also attached to the frame. As a result, it turns out a great fixture for an explosion of land, which can always be equipped with a motor.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

Useful advice

Assembling the cultivator should be accompanied by compliance with all security measures. When using welding it is very important to securely protect your eyes. Work with metal, including its processing and cutting, requires protection for face and hand.

Before proceeding to the manufacture of the device or its refinement, it is necessary to decide why it is necessary. For example, aggregates for the removal of weeds and just loosening beds can be very different. For greenhouses it is worth choosing lightweight models with manual control. If the processed areas are quite large, then you should stop the choice on options that run on fuel or from electricity.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

Stages of the manufacture of cultivator are important, but do not forget about the rules of operation of this unit. It is most important to maintain a driving mechanism in working condition.

Before starting to work using the device, you need to check the oil level. It is worth noting that the lubricants should not save, and their replacement should be carried out in a timely manner.

When the cultivator will not be operated for a month or more, it must be deposited. To do this, it is necessary to remove the fuel from it, clean the surface of the engine and all other elements. Cleaning parts of the device is undesirable with a strong water pressure. Metal parts need to lubricate with oil to avoid unwanted corrosion. Store the unit is needed in a dry and unache.

How to make a cultivator with your own hands?

How to make a cultivator with your own hands?

How to make a cultivator with your own hands, look in the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment