For more than 2 decades, DoorHan has been producing different types of gates and rolls, automation and various equipment for warehouses and other types of products in our days.
Today, Doorhan produces a line of modern gate, which consists of 9 popular series.
The choice of a specific model should take into account:
- dimensions of the garage room opening where the gate is installed;
- parameters of this room;
- wall thickness, because the weight of the gate themselves will depend on them;
- Distance from floor to garage ceiling.
The gates for Doorhan garages have some features that the consumer should be known initially:
- Often, these gates have unusual sizes and see that it can impress many buyers.
- You can install these gates in the openings of any parameters, which is their main difference from the products of other firms, while it is worth assessing high-quality heat insulation, which will be ensured by this room.
- A wide range of type of gates: Basically, these are rolled products from steel profiles, roll-out or swing products, a spiral gate, high-speed and the most sought-after – a sectional type gate. Such a gate is needed to completely close the garage opening: the sections gradually rise to the ceiling of the room.
Doorhan produces 9 episodes of a similar type of gate and differ from each other with characteristic advantages (and negative parties too):
- Series with labeling Yett – these are the first 5, the most democratic at the price. They differ in attractive species, do not require certain sizes of the opening, and the installation can be carried out without the help of professionals, that is, the buyer’s own forces and quickly.
- RSD series – 1 and 2, fit for all varieties of garages.
- PREMIUM series It is much more expensive, since the canvas is additionally lined with aluminum to increase its resistance. The company also produces a sectional cloth for special parameters that will significantly differ from the standard. The most important thing is to accurately use the instruction manual, then such products will serve you as long as possible.
Warranty of high-quality work of the “Yett” and RSD01 series is considered 10 thousand cycles of raising gates and their lowering, and for RSD02 – 25 thousand cycles.
Retractable gates wear and other name – sliding, as it is on this that the main principle of their work is based: the gate move aside, opening the opening. This type of product is suitable for those places where vehicles are passing quite often.
Among their basic advantages should be noted the following:
- For their unhindered work there is no need to clean snow or foliage from time to time;
- They save place;
- they are massive and durable;
- without limiter on top, so suitable for any type of transport.
In addition to advantages, these gates and cons:
- Such products are made 2-3 times longer;
- It will take the construction of a solid foundation, which makes them installation more costly in temporary and financial sense;
- Only professional installation is suitable.
Thanks to the mechanism with rollers, the gate with automatic control when the electricity is turned off can be calmly open and close manually.
Doorhan releases a cloth for these gates from vertical lamellae, which can carry out traffic perpendicular or parallel to the way, while being open on the sidewalls.
The selection of automation remains for the buyer, as well as the question of the additional insertion of the window or wicket. Installation of them will depend on a certain type of equipment.
As the manufacturing material of the gate is most often used:
- Professional sheet (the most bought, since cheap);
- “Steel Sandwich” (has a catchy look and design, while weighs little);
- Forged products (become a stylish jewelry, if you attract designers and artistic forging masters).
The peculiarity of this type of product causes the mandatory presence of a specialist when installing them and when choosing (you need to calculate all the parameters of the garage in order to correctly determine the weight and type of gate).
Doorhan garage products have high quality performance and can successfully compete with leading world manufacturers, and due to low prices (especially when repaired) they have become almost monopolists in their market.
Releases company and rolled gates, however, they rarely when used by domestic consumers. According to the reviews, if they put them in the garage, then it will be a temperature on the street, and the garage, even even cold, is better to close the lifting-section gate and thermal insulation. Then the tool and the car will be in good condition. There is a company and high-speed gates – those that have speed of up to 2.5 m / s. By the way, if necessary, all your automation specialists of the company can quickly reprogram.
Advantages and disadvantages
Buying Doorhan products, you can be completely confident in its excellent quality and original design. The range of goods of the company helps to implement even the most unusual project for equipping with high-quality gates of various private and government facilities.
The main positive moments when choosing DoorHan products are considered:
- excellent quality;
- energy efficiency;
- minimum installation time;
- convenience and safety during operation;
- long term use;
- the presence of a safe handle for the gate;
- availability of finished sets;
- A huge variety of models – from sliding to sectional and angry gates;
- maintainability and ability to dismantle if necessary.
- The possibility of “upgrades” (tuning) – Supplements of the system with photocells and original sensors, various warning lamps.
- Uninterrupted work at any climate.
- Adaptation (chic assortment of available types of products will help you choose the size to any parameters without weighty damage).
- Modern and aesthetic design with a wide variability of finishing materials, all sorts of coloring and forms.
- availability of certificates and compliance with standards and standards, which operate in Europe, where requirements for high quality and complete safety of goods are extremely serious.
- A huge sphere of use – they can be applied by ordinary people in domestic conditions and at various production facilities, in street conditions and at home.
- Price availability (comparing with popular imported analogues).
- Convenience when used (presence of remote control of the gate mechanism).
- Reliability (availability of modern balancing systems – additional springs, cables).
There are also constructions and cons, celebrated by many buyers:
- Over time, the automation starts problems, especially after strong temperature drops;
- The cost of setting the gate specialists is quite solid.
The manufacturer offers the gate of different types and purpose:
- Sectional products from sandwich panels (lifting).
- Retractable (sliding). In their designs, plastic guide rollers are used, the adjustment of which you can exercise yourself.
- Folding (“Harmonica”).
- Fireproof (with special coating).
- Flexible (on PVC-based – film both strip and hazardous species, as well as in demand high-speed rolled gates).
Also, the company produces not quite standard models.
Delivering a huge selection of gates to the market, the company’s experts have provided that:
- In each case, the gate was released according to individual parameters;
- A set of garage gates of ordinary parameters can be installed without a specialist;
- Almost all products have the ability (if necessary) inserts in them additionally open wickets or windows;
- Each buyer may decorate the gate on its own wish without prejudice to their subsequent functionality.
Automation for the doorhan gate is presented as an automatic mechanism that serves to work with the gate of such types as:
- Swing. In this case, you need to carefully examine the area of the canvas before selecting automation for the gate. The base bundle includes 2 electric drives, control unit, fasteners, remote control.
- Retractable and folding. In this situation, the actuators of the lever and chain types are perfect. Keywords will play rollers guides. Basic equipment – electric drive, magnetic limit switches, mounting base, fasteners.
- Sliding (sliding). Doorhan automation, which will be needed when working with such a type of gate, created by the modern method of “oil bath”. The main function here carries the engine. Equipment – 2 electric drive, control unit, fasteners
- Sectional. Doorhan automation, which is used with these structures, depends on the frequency of use and garage dimensions. It is best to use vial and chain type drives. Automatic systems for garage models are most often represented by ceiling modifications with a powerful engine, providing smooth lifting and lowering of the guide sash. Basic equipment – Drive, Curved, Remote, Bracket set, Set of hardware, Instructions.
In some cases, it is possible to carry out self-installing the gates produced by Doorhan.
The correct installation of such systems occurs in several stages:
- First, work on high-quality garage preparation.
- Frame is collected for future gates with its subsequent consolidation to the.
- Installation of the necessary mechanisms and the linen of the gate.
- Adjustment of mounted systems.
It is necessary to prepare in advance those tools that may be needed during the installation of the installation: mandatory need a perforator or perfodrel, good hydroelectric system and building levels, drill sets (for monolithic structures), electric grinding machine and manual electric logs, sets of various keys.
Before starting work, it is necessary to make sure that there is a complete configuration of the product delivery, otherwise you will need to look for more time and buy lacking details.
The main requirement when preparing the garage opening of the garage is to check the absence of all sorts of cracks on it and the presence of a solid foundation. For this, the outdated covering of the facing is neatly removed, the cracks are eliminated using a special solution, the surface is aligned with plaster, and these measures are made inside the garage, and outside. If the openness is built of foam blocks, a brick of hollow or gas-silicate blocks, it should be pre-strengthened.
Traditionally, it is used for this, a frame created from metal.
This frame is strengthened with anchors. Concrete walls and brick structures do not need additional strengthening. Next you need to clean the garage space as much as possible, otherwise the installation of the canvase will inconvenient.
The gate can be mounted with 3 in popular methods: overhead, spill and with embedded in the wall. The invoice method refers to the simplest and most often used for rolling products: the shaft is fixed to the wall above the opening, and directions are installed on it from it. PRIVERSE METHOD – Fastening the shaft from above. In fact, the automation box in this case creates a new proditch, which will be 35-40 mm lower than the existing basic.
Embedding is the most difficult and difficult way that is used extremely rarely. For the most part trust his professionals. Some types of gates are best immediately entrusted to those skilled in the art, for example, panoramic industrial sectional doors independently establish very difficult.
At the end of all work, the system should move smoothly and evenly. Installation of products with your own hands – albeit a difficult task, but most often perfectly.
The main thing is to fulfill the manufacturer’s recommendations, which are detailed in the instructions that are available from each model of products.
If after installation, there is a spontaneous opening of the gate without control on your part, it is necessary to contact the company’s specialists. Almost all models of the manufacturer’s gate can manual tuning of the electric drive.
An additional insulation of the garage premises can be carried out using a special external doorhan production seal. The main condition for the best use of sectional gates is the long-intensive state of the cables. They are needed for the movement of the working path and for its balancing.
It is impossible to allow millimeter cable sagging – this is the main error of using sectional products, which can lead to a damage of the mechanism. Replacing cables is possible only in the case of full loss of their operational qualities. Checked cables can be manually adjusted for days.
Do not forget about constant gates – they need to be treated with special lubricant in winter (once a month), and in summer, in spring and autumn to increase the interval between the service to 2-3 months.
According to numerous reviews, the automatic doorhan gate almost do not require repair (with proper operation and the necessary care). Most of the gate faults can be eliminated by their own hands according to the drawings in the instructions or get the help of the company’s specialists in the shortest possible time.
Maintenance of their products company leads competently. All users are satisfied with the presence of a large selection of colors of the gate, the ability to purchase a film swap gate or with a wicket. Also many makes the opportunity to conclude a gate control panel in a key chain and store it with the keys from the car.
- Sectional products from Doorhan in stylish design perfectly look at the entrance to any garage.
- Automatic sliding gates will decorate the loft and make it more solid and stylishly decorated.
- Swing doors from the manufacturer will produce no less stunning effect, fit perfectly in any space.
About how to install section gates, look at the video below.