The harvest of potatoes is a complex and long-term process, which today can be significantly simplified and relieved using potatoes for a motoblock. This uses many farmers to not dig tubers manually. Thus, it is possible to save a large amount of time and effort.
Additional equipment on the motoblock makes it easy to make many types of work in the farm and on ordinary 6 acres of cottage. One of these aggregates is a potatoes, which is capable of not only simplifying harvesting, but also prevent serious damage to the human musculoskeletal system, which could occur in the case of potato cleaning manually.
An important feature of the potatoes is also in the fact that when using tubers are subject to less damage. After passing the device in beds, potatoes remain directly on the ground surface. At the same time, some types of diggers are capable of recking even cleaning tubers from the ground. Among the features of this attachment, many users noticed another one – after its use, the earth becomes more loose. In addition, when digging potatoes, the removal of sprouted weeds.
Farmers, in the farms of which there is a motoblock, such a device has a very profitable device. The design of potatoes is made in such a way as to simultaneously prevent the tubers in the bucket. Moreover, the conveyor potatoes for the motoblock can accelerate the collection process several times compared to other models. Of course, when this equipment is selected, it is necessary to take into account the power of the motoblock, as well as the area of the processed section.
Principle of operation
According to the principle of operation of potatoes differ slightly. It lies in the fact that with the help of a special attachment with teeth, the unit penetrates into the soil. As a rule, the depth of penetration does not exceed the one on which the main potato volume is usually located. After this layer of the soil, along with rooteploods it turns out on the surface.
It is worth noting that the land sticking to potato tubers, in the process of operation of the device partially or completely removed. For example, in the vibrational units, the earth with tuber cuts with a knife, and then falls on the grille, where tubers from the ground takes place with the help of vibration. In the conveyor models, the cleaning principle is similar, only instead of the lattice uses the conveyor belt.
Universal potatoes makes all the main work and as a result, the farmer remains only for his hands to make a potato lying on Earth. At the same time, after herself, most potatoes leave a flat surface, without large land comkers.
Additional equipment for digging potatoes may vary in size, structure, width of the working strip, the possibility of working on various weeds, ways to purify tuberber from the soil. However, most often allocate two types of potato coplocks according to their principle of operation: passive and active.
Are the simplest types of copulocks for motoblocks. The main advantage of their advantage is a small cost and possibility of connecting to almost any model of the motoblock. Most often, such potatoes are made in the form of a shovel resembling his heart. In its upper part there are teeth, and the lower edge is pointed. Your sharp part of the device is included in the soil, while the gear part lifts potatoes on the surface. The biggest earthlings are disintegrated at the moment when the teeth fall.
Copulks of this type are attached using the hitch. Of course, such equipment is distinguished by essential reliability and simplicity, but at the same time manual labor will be significantly more. In addition, not all tubers are easy to find under the commits of the earth that did not crash.
Connect to Motoblock using a belt, gearbox, power take-off shaft (VOM). For them, special adapters are also offered, allowing to use the belt for fastening. Such potatoes are distinguished by highly efficient work and reliability. In addition, they are better cleaning the roots from the ground, which simplifies manual labor. Such diggers are divided into the following ranges of devices:
- conveyor, in which, for cleaning, the crop passes through the conveyor belt;
- vibration, which are equipped with a vibratory grille; they have another name – scanty.
It is worth noting that the joker of the conveyor type is also often used to harvest beet or bow. At the same time it can handle the fields of a large area.
Advantages and disadvantages
The main advantage of potatoes is that it significantly accelerates and facilitates work. This is an important advantage, especially when you have to handle areas of significant sizes. Among the advantages of this device, it is also worth highlighting the possibility of working with any weather. If, with too dry or wet weather, the potato digging is manually becomes too complex, then with such an aggregate it is greatly simplified.
Potato spell allows you to get potatoes of a good commodity type. After all, tubers will not only with minimal damage, but also practically clean. It is important to note that the potatoes of all types are characterized by simplicity of operation that does not require any special skills. The main disadvantage of such an aggregate can be considered, since the active type of active type copulocks can cost a lot. As well as some notice the inconvenience as necessary to plant potatoes with smooth rows. However, it is easy if you use special fuel equipment.
Currently, a large number of potato copulock models are presented. Among them, practicing farmers allocate several used most often.
This model is a conveyor copal, which is one-row hinged equipment. It makes it possible to collect a harvest with almost lossless. The device has a well-thought-out design and is characterized by high performance. Can be used for almost any type of soil. The model provides the ability to adjust the depth of the coppe, the maximum value of which reaches 20 cm.
Is a vibration digger, which is often used not only to collect potatoes, but also other root crops. It is very convenient that this model is used in conjunction with the “Favorite” type, salute and other. Great for lands, featuring light and medium moisture. This model is capable of working at a speed of about 2 km / h.
Can dig up to 20 cm deep, and the width of the working band reaches 35-37 cm. The popularity of the model is due to its average cost.
The model with a vibratory lattice of the Soviet sample is distinguished by its versatility. It is suitable for motor-blocks of various models. And it can be handled even the fields with solid soil. To do this, enough for the unit to install an additional knife.
The main characteristics of the device are the same as most other gross copulates:
- speed – up to 2 km / h;
- Depth – up to 20 cm;
- Working strip width – 36 cm.
Is a two-row model that is well suited for both motor blocks and tractors. Perfectly joined with aggregates with a capacity of 24 liters. with. Differs fast and high-quality work. The width of the working strip of this model is 42 cm.
This vibration digger is most effective to use less than 2 hectares on small gamns. The maximum depth of the coppe does not exceed 18 cm, and the width of the working band is 39 cm. It is worth noting that the small weight of this model allows it to use it repeatedly. It is well suited to such motoblocks as “Favorit” and “Neva”. However, it is undesirable to use for soils whose humidity exceeds 30%.
This vibration model was created specifically for the motoblock with the same name. However, it is also suitable for other devices if there are additional fastening belts. For 60 minutes of operation of such an aggregate, you can remove the harvest from the area of 0.2 hectares at an average speed of 1.5 km / h. The model is capable of penetrating to a depth of 20 cm, and the working width is 35 cm.
It is worth noting that the reviews on the work of this potato chopper one of the best.
Scaffolding, perfectly suitable for Motoroblocks “Zarya”. For the hour of work of such a car, you can remove the yield of potatoes from a plot of 2 hectares. The width of the working strip of this car is 40 cm. At the same time, the depth of the coppe reaches 28 cm.
In the next video you will see a brief overview of the conveyor potatoes for the Motoblock “Neva”.