Coils for gas station: features, installation and verification

Benzocos and motocos work with cutting nozzles of the following type – this is a metal disk, as well as a head with a fishing line. Such nozzles are called consumables. The head is a housing with a coil and a fishing line inside. Most people are called the coil, which is considered wrong. In this article, we define what coils are, what they differ from each other.

Coils for gas station: features, installation and verification

Coils for gas station: features, installation and verification

Features of coils

On the gasoline trimmer first inserted the coils of the manual type that had the most simple design. Coils consist of plastic or metal disks in which a hole for a fishing line. It is formed in such a way that the fishing line has been included in it. It is necessary to take into account the fact that The fishing line has often to refuel, and before that you need to disassemble and assemble the aggregate.

Coils for gas station: features, installation and verification

Mechanical heads are a housing in which there is a bobbin with a fishing line. This “spider” copes well with his work. In this case, the flow rate is minimal, but to change it, it is necessary to drown. Popular heads of semi-automatic. E. When the fishing line comes out in a semi-automatic form. It establishes a special mechanism, feeding the fishing line is quite quickly, without manual intervention. The kitar must touch the head of the land, the mechanism is activated, Cord. For this No need to join the device that the owners of the Benzokos are especially appreciated.

Coils for gas station: features, installation and verification

However, such coils have a number of minuses. Only branded models are used for work, cheap devices are not recommended, because they are not durable.

Therefore, it is not always possible to rationally stop your choice on semi-automatic coils. Automatic devices are quite reliable, as well as effective in use. Court is added when the engine turnover is reduced in the automatic mode. Fishing line occurs automatically, which is very practical for most types of braids, especially for motocos. Such heads are 2 times more expensive than semi-automatic options, so not everyone can buy them, but experience has shown that High-quality automatic coils serve much longer than everyone else.

Coils for gas station: features, installation and verification

Universal head is used in different types of trimmers. This option will be optimal if the kitar uses several tools for hiding grass. Such devices are suitable for different trimmers and braids, have a low cost, but also do not have good reliability. At the same time, they are easy to find, it is a fairly common look of coils, unlike branded.

Coils for gas station: features, installation and verification

Installation of fishing line

Cord Charging Type has several species.

  • Quick-timed option. Such spools are considered the most modern, they do not disassemble. In order to wind the fishing line, it is enough to push it into the hole of the head, combine the 2nd end and screw on the drum. This mechanism is used in the heads with automatic type, sometimes in semi-automatic. The master does not need to understand the rules of winding the fishing line and spend time on her refueling.

Coils for gas station: features, installation and verification

  • Collapsible option. This option is used on semi-automatic, as well as hand heads. In order to wind the line on the coil, it is necessary to drown out the device. Then you should disassemble the head cover, pull out the coil. After that, it is necessary to hide the cord and put in place.

Coils for gas station: features, installation and verification

As practice shows, the most popular option is collapsible. The effect has the price, it is accessible to most people. Coils in them are such.

  • Single-section, in which the fishing line is wound through one groove.
  • Two-section, In it, the fishing line is laid in 2 grooves. This is a convenient and easy laying line.

Coils for gas station: features, installation and verification

Coils for gas station: features, installation and verification

Check service and gap

In order to assess the condition of the coil on their own, it is necessary to explore the coil body, there should be no cracks and contaminants on it.

Conductive parts and nodes also should not be rust. Candles must be in good condition, they need to be installed correctly. The circuit breaker should work well.

If everything is in order, then check the coil.

  • Checking resistance.
  • We check the presence of spark.
  • You can use a candle.
  • If the situation is hopeless, then it is necessary to remove the lid from the candle, put the nail without the “cap”. The main thing is not to damage the cap.
  • We bring the aggregate. Check the ignition system. It is necessary to monitor the candle to be smoothly screwed into the hole. We look at the color of the spark. If the color is blue, then there is no malfunction.

Coils for gas station: features, installation and verification

    With any check, it is necessary to put a gap between the flywheel and the coil. The magnitude of the gap fluctuates depends on the tool model. The gap between the flywheel and the coil must be from 0.2 to 0.4 mm. Check the ignition coil is better than a multimeter, as well as a tester. Repair the ignition coil is impractical.

    How to choose a coil for the benzokosy, look next.

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment