Motoblocks “Salyut-100” should be noted among analogs for small dimensions and mass, which does not interfere with them to use as a tractor and in drive state. Equipment is easy to manage even a newcomer, it demonstrates good performance and reliability.
Features of the line
“Salute-100” is ideal for operation on sites that are too narrow. It can be a garden, with a lot of plantings, mountainous terrain or a small garden. Such a technique can plow, dip, harrow, loosen and perform other tasks if you use mounted equipment.
The engine is located in the design of the motoblock transversely, two belts are installed on the clutch drive. The manufacturer provided a gear gear and handle that the operator can adjust vertically and horizontally.
Transmission control is on the steering wheel. In previous models, it was installed on the body from below, so each time it had to be okay that in combination with the cart, it became almost impossible for the user for the user.
When creating “Salute-100”, much attention was paid to convenience, so the handle was decided to make ergonomic so that it could be comfortable to keep it, and at the same time not to feel a big vibration. Plastic was chosen as the main material for levers, thanks to which he does not injure his hand, as it happened with a metal version.
On the lever in the same version, when you press it, it was constantly drawn up, this lack of manufacturer corrected and now the hand is less tired. If we talk about the structure of the steering wheel, it did not change it. She sustained the test time and confirmed its convenience. Management is highly reliable, can be adjusted in the required direction, rotate 360 degrees.
Use any attached equipment is possible both with a hitch behind and in front. Any hitch withstands a larger load, it is distributed evenly as the balance of weight. All this made it possible to facilitate work with the technique.
Distinguishes “Salyut-100” and gear shift system. The handle was decided to take on the steering column, closer to the user. It did not need to change the gearbox, only replaced the handle on the scene and the cable control. All this has made it possible to simplify the task when towing the trailer, it has disappeared the need to reach transmission.
On the knot change of the height of the steering wheel is plastic pad. Changed the protective casing on the clutch pullees. Now he completely closes them from dirt and dust. It was decided to change the fasteners, now screws that are easy to unscrew the cross screwdriver are installed.
Motoblock “Salyut-100” has a Lifan 168F-2B engine, OHV. Fuel tank accommodates 3.6 liter of gasoline, and in the oil crankcase is placed 0.6 liters.
The role of transmissions plays belt clutch. The movement forward is carried out using 4 gears, and if you take back, then 2, but only after reinstalling the pulley. The diameter in the cutter 31 centimeter, when immersed in the soil, knives include a maximum of 25 cm.
In the configuration of the motoblock there is:
- 2 wheels;
- wheel extensions;
Construction weight reaches 95 kilograms. There is no front pin, because it is possible to fasten the frontal jacket with a rotation of the steering wheel 180 degrees. While you need to use weights. If the work is performed on a wet soil, then caterpillars are used. The design has an open air intake carburetor, sometimes there are problems with the flow.
On the pneumopoles there is a wheeled chamber, so it is necessary to regularly check the pressure and not load the motoblock of more permissible weight, and the semi-Differential hub.
On all models “Salute-100”, one type of engine is used, but it is planned to use motors and from other manufacturers in the future, including to release a motoblock with a diesel unit.
The gear gearbox in Salute-100 is much more reliable than those used in another technique because it is not so quickly wearing. The margin of the strength that it demonstrates allows you to install engines with different technical specifications.
It is different and the simplicity of repair, but has an increased value. Designed to work within 3000 hours, which surpasses other types at times. The gearbox has a single design with a gearbox, which also had a positive effect on reliability. Using the probe, which is supplied in the configuration, you can check the oil level at any time.
Single attention deserves a grip that is two belt. Thanks to them, there is a transmission from the motor to the torque reducer.
Motoblock “Salute 100 K-M1” – Milling type technique that can cope with the processing of the territory of 50 acres. The manufacturer recommends using the product at ambient temperature from -30 to + 40 s. One of the advantages is the ability to put the technique even in the trunk of the passenger car to transport to the place of work.
Inside there is a Kohler Motor (Courage SH series), which works on gasoline AI-92 or AI-95. Maximum power that aggregate can demonstrate – 6.5 horsepower. The capacity of the fuel tank reaches the mark of 3.6 liters.
The crankshaft is made of steel, and its sleeves – from cast iron. Ignition electronic, which can not not please the user, lubricant is fed under pressure.
“Salute 100 R-M1” acquired excellent ergonomic design, it is distinguished by increased comfort of control, excellent maneuverability even on narrow sections. Works stable, has a powerful Japanese Robin Subaru motor, demonstrating power in 6 horsepower. From the positive parties to use such equipment, you can allocate low exhaust toxicity, almost instantaneous launch, low noise level.
“Salute 100 x-M1” Called on sale with Honda GX-200 Motor. Such a motoblock is great for performing not only work in the garden, but also for cleaning the territory from dirt and garbage, as well as trimming of small shrubs. The machine is able to replace most of the hand tools, so it is very popular. She can plow, dip, create a bed, dig root root.
Power of power unit 5.5 horsepower, it works relatively quiet, fuel consuits economically, which is also important. Motoblock demonstrates uninterrupted operation at any ambient temperature.
“Salute 100 x-M2” It has in the design of the Honda GX190 engine, with force 6.5 horsepower. Transmission management is on the steering wheel, which greatly simplifies the process of operation. Cutters are installed as standard, the grip width of which is 900 millimeters. The technique can be praised for the compact size and the ability to carry it in the trunk of the passenger car.
Distinguishes the model Low center of gravity, thanks to which the operator does not have to make a lot of effort in the process of working with a fiberboard.
“Salute 100 Wall-01” Works on the Hwasdan engine. This is one of the most powerful motoblocks, with a force of 7 horsepower. Used in large areas, so its design provides for heavy loads. When using Balascal cargo, makismal traction is 35 kilograms on the wheels and 15 more on the front suspension.
“Salute 100-6.five” Differs on the engine Lifan 168F-2 and the amount of traction to 700 kilograms. The model can be noted for its compactness, no problems during operation and the available cost. This technique can demonstrate stable operation, even if low-quality fuel is used. Tank of gas tank 3.6 liters, and demonstrated motor power 6.5 horses.
“Salute 100-BS-and” equipped with a very powerful engine Briggs & Stratton Vanguard, which economically spends fuel. Pneumocoles in the configuration have high permeability. The center of gravity is underestimated, thanks to which the motoblock can be praised for maneuverability. Can work even on a plot with a slope. Power technology 6.5 horses, tank volume for fuel 3.6 liters.
Subtleties of choice
To properly choose a motor-block for the garden, It is worth listening to the councils of specialists.
- The user needs to study in detail the set of possible functions and evaluate the front of work on the estimated area.
- There are motoblocks that are capable not only to handle land, but also to care for the garden, clean the territory. They cost more, but allow you to automate manual work as much as possible.
- When choosing the technique of necessary power into account, the type of soil is taken. In this case, the user must examine the technical characteristics such as power and torque.
- In the absence of the required weight, slippers will appear on heavy soils, and the result of the work will not delight the operator, because in this case the soil rises in places, the uniform depth of immersion cuts.
- The performance of the described technique directly depends not only on the power of the engine installed in the design, but also from the width of the rut.
- The selection shaft is responsible for connecting power equipment. With such an expensive purchase it is worth seeing what is the possibilities of the motoblock in the direction under consideration.
- If you plan to use a motoblock additionally as a means of movement, then you should choose a model that will be equipped with large pneumopoles.
- If the technique is used as a snowplow, then it is better if the branded power unit operating on gasoline is installed in its design with the possibility of additional installation of snowstocks.
- The cost of the motoblock by 40% depends on the type of motor, which is installed in the design of the model under consideration. This element should be distinguished by strength, reliability, easy maintenance. It is worth remembering that diesel units are not used in the cold season, so gasoline “Salyut-100” in this case has an advantage because they work only on gasoline.
- Motoblock must have an defraensual function so that the technique can be upgraded at the request of the user.
- In the width of processing, you can understand how accurately the manufacturer declared the performance of technology. The more this indicator, the faster the work will be performed, but also the engine power should be appropriate.
- If necessary, constantly plow the earth, it is necessary to take into account the depth of immersion cutters, but it will be necessary to take into account the weight of the technique, the complexity of the soil and the diameter of the same cutter.
I am easy to find spare parts for Salyut-100 motoblocks, and in this their great advantage. Before starting work, it will be necessary to collect cutters in accordance with the instructions that comes with each model. Exhibit mills to the required level so that the plowing of the earth is high-quality and did not cause complaints.
Replacing the oil in the gearbox is performed after 20 hours of operation, with the time of year, when the motoblock is operated. It is poured through a specially designated hole, on average it is 1.1 liter. Level will be required to check for this in the configuration there is a dipstick.
To adjust the gear, the manufacturer significantly simplified the process by placing the arm on the steering wheel. If necessary, you can change the rear transmission if you pull the belts in another position.
If the motoblock does not start after a long idle, then the first thing that is required from the user is to blow the carburetor, and then throw a little gasoline to the damper, which should remove the oil. If you have a re-problem, you are advised to give the equipment to the service for a more careful inspection.
In the case when during the operation of the motoblock it turns out that 2 speed jumps out, then the gearbox will be disassembled. In the absence of relevant experience, it is better to trust this by a specialist.
In the Internet, you can find a lot of positive feedback on the quality and reliability of Salyut-100 motoblocks. Some dissatisfied users note that the oil leaks from the carburetor. In order to avoid this problem behind the oil level, it is necessary to carefully monitor, and the technique is to keep a smooth position.
In general, the quality of operation depends on the operator. If it does not follow the motoblock, not follows the instructions of the manufacturer, then with time the technique will start closing, and its internal nodes are extended faster.
About the pluses and cons of the Motoblock “Salyut-7” you will learn from the video below.