All about the fences from the rail

Recently, there are increasingly wishing to install on their sect. This is due to the fact that such a fence is easy to install, it significantly engraves the plot and makes it stylish. The fence is made from various materials and different forms – some are very bizarre. In the article, consider which types of the fence exist, and how it can be built on your own.

All about the fences from the rail

Pros and cons

The first indisputable advantage I want to call the decorativeness of the fence from the REK – it looks stylish and is suitable for any garden design. If the fence is wooden, it can be painted in different colors. In addition, the painted tree is protected, it serves longer, and it does not hit the fungus.

All about the fences from the rail

The booth fence will cost a small amount if it is made independently – you can not only save, but also to purchase design skills.

All about the fences from the rail

By cons of decorative fence, such a factor can be attributed as the ease of construction – it serves as an ornament, because the fence consists of thin regions. If it is good not to process the wooden fence by an antiseptic, most likely, after 7-8 years he rotates. To ensure that the fence always looked beautiful, it must be constantly tinting with paint or varnish, not allowing the formation of properms.

All about the fences from the rail

Note that the wooden fence is not as durable as a fence from metal, brick or concrete. Selection rails serve only for beauty.

All about the fences from the rail

Review of species

Depending on the wishes, the fence from the rails can be any forms and design: braided, mounted crosswise, horizontal or vertical. The choice of fence depends on the design solutions, the main thing is to take into account all the nuances, because the fences differ in their properties. Of course, in appearance leads a wooden fence, but do not forget that it will often have to handle it. There are several types of fence from the rail.

All about the fences from the rail

  • Vertical. In this case, to horizontal bars, rails are attached in a vertical position. For this use nails or self-tapping screws. Without self-sufficiency, it is not necessary if the frame is a metal fence. Elements can be a single canvas without gaps or be installed on a certain distance from each other.

All about the fences from the rail

All about the fences from the rail

The vertical fence from the rails is rarely solid, as it is precisely alternating emptiness and wooden elements create an original design.

All about the fences from the rail

  • Horizontal. In case the fence supports are made of wood – rails are attached to them. To strengthen the design (so that the fence over the years has not saved) between the colums you can fix 2-3 vertical beams.

All about the fences from the rail

The horizontal fence has a number of benefits: it is more hiding what is behind it from passing people

Sewing methods for her a lot, it is chess, solid firmware, sewing with a gap.

All about the fences from the rail

  • Grid. To get a beautiful and accurate fence from thin rails, you can order ready-made sections from specialists. If this item is not considered, and I want to build a fence yourself, it is important to observe the distance between the elements of the fence.

All about the fences from the rail

All about the fences from the rail

The canvas is obtained by cruciform due to the attachment of the rails to the crossbar. They crossed at an angle or perpendicular.

Self-timers or nails are used for fasteners. The tip of the fence can be left smooth or make it semicircle.

All about the fences from the rail

All about the fences from the rail

  • From professional flooring. Proflists for the fence are steel sheets with longitudinal profiling.

This option is in demand among the owners of the cottage, since it combines low price and excellent performance.

All about the fences from the rail

The buyer offers a wide selection of professional flooring: it is of a variety of colors. Professional flooring can be combined with other materials, and on the installers it does not require special skills in the installation. Retail fastening implies their fixation at a distance of about 7 cm from each other.

All about the fences from the rail

All about the fences from the rail

  • Plastic. Plastic fence – excellent choice for giving. The material is beautifully painted, and the surface can be the most different: mirror, matte, textural. Most often openwork and wicker options are used to fence the flower. The solid wall of PVC protects against the wind, dust and unnecessary views of foreign.

All about the fences from the rail

All about the fences from the rail

Wicker plastic fence from the rivers is wonderful for a rustic country house in a rustic style.

All about the fences from the rail

Wicker hedge is made from both thin and thick plates. The location is possible in different versions: horizontal or vertical.

By combining, you can achieve a unique hedge. Plastic panels, alternating with openwork inserts, create an attractive fence.

All about the fences from the rail

How to make it yourself?

Consider the manufacture of a rattle fence of several species. All of them are easy to install and do not require preliminary preparation.

From the professionalist

Fencing from the professional flooring (in a different way they call the Ershtrokel) will be asked any section. Constructed a stylish fence forces by even a newcomer, inexperienced in construction work. Such a fence is done very quickly and looks neat.

All about the fences from the rail

Behind the fence from the professional sheet does not need to constantly care, the material is distinguished by durability.

Installation is carried out in accordance with several recommendations.

  1. If the components are disassembled, the sections canvas are strongly recommended to collect according to the instructions.

  2. Rakes are attached at a distance of about 7 cm from each other.

  3. The necessary materials for work must be prepared in advance. Clamps, self-tapping screws or rivets can be purchased at any construction store.

  4. The fence from the professional flooring includes a standard mounting procedure. Special attention should be paid to the installation of supports – they must be properly strengthened and placed on the same level.

  5. Sections and crossbars are attached to supports, given the design feature. They are going from slats lamellae.

  6. Fencing lamella can be collected in any form: horizontal or vertical.

All about the fences from the rail

From wood

Wooden Rosek Fence is called a stakenist. This design is characterized by ease of installation. For the river fence, it is desirable to select lumber from trees such as pine, cedar or spruce. The design will last for a long time, which is a significant plus. Wood must be without bitch and one color.

All about the fences from the rail

To avoid rotting of the tree, the material after installation is treated with an antiseptic or color.

Installation is carried out in several stages.

  1. First of all, it is necessary to align the line where the fence will be installed.

  2. In the corners, where the end of the fence will be, you need to install pillars, but between them pull the rope.

  3. Between the supports on the line where the markup passed, you need to build piles of steel. On average, the depth of installing each support should be 1 m, and the width does not exceed 2.5 M.

  4. When the pillars are installed, then you should attach horizontal crossbars. They can just nail to the post.

  5. Sections Fences are selected depending on the sizes of the spans. They must be fixed between pillars support.

  6. Modular rush fences include special grooves in their design – sections are inserted into them very simply as in the constructor.

All about the fences from the rail

Metal

Metallic fencing looks very effectively. It is installed in a variety of positions. Such a fence is incredibly handsome, it serves for a long time and copes with any loads. It only periodically needs to wipe from dust for aesthetic beauty.

All about the fences from the rail

Plus, in contrast to the fence from a tree on a metal, a mold does not appear, the material is not interested in insect, and it does not need care.

Metal fence installation order.

  1. Steel strips are covered with several protection layers (with such manipulation, the material looks even more beautiful).

  2. First of all it is necessary to make marking. For this use wooden peasants and ropes.

  3. The pegs need to be driven into the ground to the place where the supports are located, and then pull the rope between them (similar to the installation of the plates from the tree).

  4. Pipes of rectangular or square section are welded to the columns. At high height, the fence will need 3 lags.

  5. Metal school can be fixed with galvanized screws: Each rake is fixed from two sides to horizontal lags. For 3 lag, it will take 5 screws, if there are less than, for example, 2, then 4 sams will be enough for one bar.

All about the fences from the rail

Tip: Pick all fasteners in accordance with the color of the stakenist. The top of the fence can be interesting to issue: wave, ladder, christmas tree, arc or trapezium.

Do it yourself you can create an enviable fence. The most common types of wooden stake fences and solid. Owners of country sites attract these types due to the ease of installation and the possibility of manufacturing the fence in any style. The fence from the stakenant does not completely close the plot – do not forget about it. If you are not accustomed to the views of others, it is better to choose a solid.

All about the fences from the rail

How to build one of the options for the fence from the rails, look in the video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment