How to Clean the seams between tiles in the kitchen?

Tile or ceramic tile not in vain choose for a kitchen – indoors where fat splashes are regularly spilled, these materials are indispensable. But if the hostess for some reason does not have time to immediately remove pollution, then small fat particles are frozen, clogged in the tile seams. To clearly clean the place of the joints, it will take severe household chemicals or proven folk remedies.

How to clean

Joints on a kitchen apron laid out with a tile, or on a ceramic tile on the floor, require a special relationship. Even if the tile is crawled to the usual wet rag, fat and dirt remain in the seams. High-quality surface treatment requires care and sequence in action.

  • To clean the tile or ceramic tile, without missing a single seam, use special brushes or sponges that can effectively remove dirt without risk to damage the surface. Even if the joints are severely contaminated, it is impossible to use metal products. From such sponges, the appearance of the finish will be spoiled.
  • Wipe the tile is necessary after each cooking. Fresh fat drops easier to remove than the solar.

  • Before putting into the case of the detergent, it is desirable to heat. Spots from the kitchen tile will be faster, and there will be no effort to rub off the joints.
  • With the help of a special device, you can add steam coverage. He softens the solar dirt.
  • Taketing for washing, you should wear economic rubber gloves. They protect the skin from the effects of aggressive substances.
  • Cleaning pollution on the kitchen wall laid out with a tile and seams between the tiles need to be started at the bottom, and the wrapper of the surface – from the upper rows of the coating.
  • To quickly drop fat and fungus between tiles, you should arm a toothbrush.

Features of the use of household chemicals

When choosing chemistry, it is necessary to carefully examine the instructions for applying a specific. Not all substances from the industrial arsenal of gels, liquids and powders are suitable to bring the tile in order.

  • Powder products, despite their good penetration in the seams, damage the surface of the tile itself.
  • Acid chemistry causes damage to interputric seams if they are not covered with epoxy paint.
  • It is more profitable to purchase sprayed means, as they are spent slower than gels and liquids.
  • Makeups for windows and dishes are suitable for washing the tiles and ceramic tiles.
Read more  How to choose Maunfeld's oven?

Application of primary means

In addition to shopping chemistry, others made from the substances and products available in the kitchen are used to clean the seams: soda, ammonic alcohol, vinegar, citric acid.

Soda and compositions based on it

Food soda is perfect for cleaning the seams. In 1 liter of water breed 3 tablespoons of substances. This liquid is wiped with tiles and joints using a sponge. Due to soda water, the gaps between the cafeter become lighter. After completing cleaning, it remains a damp rag remove divorces. If the seams are very darkened, the soda can be connected to a substance containing chlorine. For example, use bleach for linen or cleaning agent for shells and toilets: “Domasetos”, “Sif” or those like it.

Bleaches are connected to soda to pasta. This means are treated with seams so that there are no non-worked sections – if you skip something, the spots will remain on the floor or wall. Paste must dry. Wash off her brush and water. You can only use such a tool if the stood on the junctions between the tiles has a white color. On color joints, even very bright, Such compositions can not be used – it is easy to spoil the appearance of the coating.

Engaged in the tile in order, the window to the kitchen needs to open and at the same time close the door so that the chlorine caustic smell does not spread throughout the apartment. Remove contamination from tiles and seams will help a mixture of soda with hydrogen peroxide. Sodium bicarbonate half-cup take 70 milliliters of peroxide, a little dishwasher or liquid soap is added. The mixture on the consistency should be like porridge. It is distributed through the cafela, wait 10 minutes, and then wash off, wipes the seams with sponge.

To wash the fat tile and joints, together use soda and vinegar. Sodium bicarbonate is bred with water to the type of paste and smear on the tile, well treating the semisal stripes. Then the sprayer is applied vinegar. With such a combination of substances, fat is easier.

Lemon and lemon acid

If the seams are covered with epoxy paint, you can use lemon. The fruit must be cut on the slices and process the surface of the tile or ceramic tile, as well as joints between the elements of the plane. After processing, a few minutes will wait for the acid to die, after which it remains to remove the residues of the contaminants. In the same way, citric acid can be used. A tablespoon of substance is enough to dissolve in hot water, water the liquid of the seams and tiles, and in 10-15 minutes wash off with water.

Effective remedy – citric acid mixed with soda and starch. On 1 part of the acid you need to take 2 parts of soda and 1 part of starch. Mix in a homogeneous mass, sponge evenly distribute on the tile. For loyalty to leave on a tile for half an hour. Then wash off with water and wipe the surface.

Ammonia

To clean the tile and ceramic tiles, often use the ammonia alcohol. It is wetted with a sponge and pass on all seams.

Read more  Liquid dishwasher

You can do otherwise: in 4 liters of water to dilute 120 milliliters of ammonia alcohol and spray on the surface of the spray. After 15 minutes wash off. Tile shines gloss and cleanliness.

Mustard

As a piercing cleaning mass, the dry mustard is advised to use. It is bred to the corresponding type of sauce and apply on the seams and the surface of the tile. After cleaning with such a means, the kitchen glitters cleanliness.

Vinegar

If you use a mixture of vinegar, boos and ammonic alcohol, you can not only get rid of the fat in the seams and on the surface of the tile, but also do not make a divorce on gloss. In 4 liters of water, 100 milliliters of vinegar are bred, as much as the alcohol and 4 tablespoons of the boos. It is necessary to process this liquid tile and thoroughly rinse, rub with a clean rag.

In some cases, the vinegar is mixed with a clay having a homogeneous powder-like structure. It is necessary to trace so that in clay there was no impurities of small stones or garbage that can scratch the surface. On 5 tablespoons of clay should have 2 tablespoons of vinegar. This composition is treated with a tile, and then carefully wipe.

Fast detergents

In order for general cleaning in the kitchen to be arranged only in exceptional cases, with the daily cleaning of the tile, it is good to use the means of “instant action on the seams”. After completion of cooking, it is enough to put the gel gel on the sponge for the dishes, to interfere, process the surface, and then wash off. To remove fat in the seams fit a sponge having a solid structure. Reliable tiles and seams between them from traces of fresh bold splashes will help the solution of the economic soap. They wipe the surface, with force by pressing the most contaminated places.

Recipes for cleansing tiles and seams between the coating elements differ in diversity. Among them, you can choose the most suitable for a particular case depending on the features of the tile and interputric junctions. It is possible to minimize the time costs for surface treatment, as well as to optimize the costs of substances included in the cleaning agents.

In the next video you are waiting for 10 ways to clean interputer seams.

Read more  White angular kitchen: features and design options
Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: