Features Installation and Connection Gas Plate

Install the right gas stove and document it – this is a simple task, but it requires compliance with certain rules.

Many different gas plates are represented on the market. Correct this unit correctly, taking into account all the rules and tolerances, you can only with a specialist.

Can I install yourself?

All the work on the preparation of the floor and installation of the slab can be made with your own hands, but install and connect all connections can a specialist who has appropriate tolerances.

First of all, he should inspect:

  • all fittings;
  • all connecting elements;
  • the quality of the gaskets;
  • He also must conduct test trials.

Features Installation and Connection Gas Plate

    After that, it can give permission to operate a new device. If you need to make a replacement plate after a while, homeowners in any case will be required to say to the supervisory authorities that are responsible for the supply of gas.

    All gas stoves and other devices must necessarily be registered in a special supervisory authority. It is believed to a fine for the unauthorized installation of the gas device. Once at six months, the employees of the gas company are obliged to come to the homeowner and check the work of the aggregate. If there is a violation, the protocol is issued, penalties are imposed.

    If the plate is officially connected, then the home owner receives on the hands:

    • agreement on the rules for the provision of relevant services;
    • contract with the supervisory authority;
    • The book of the subscriber in which the rates are indicated by gas.

    Features Installation and Connection Gas Plate

    Where to contact?

    To officially change the slab on a more modern model, It will be necessary:

    • buy an aggregate;
    • Contact the gas company that has evidence of SRO, that is, permission to install gas equipment in a residential building.

      Private gas services offer their services most often at democratic prices. After installing a new slab, it will be necessary to register it in the “GosGase”. Workers from licensed firms are also authorized to make records in the passport of the new gas unit. The rational all is called a gas driver from a municipal gas organization, because the fewer intermediaries in this important matter, the better.

      Features Installation and Connection Gas Plate

      There is a certain procedure for replacing plates in private household. There are urban programs in megalopolis, according to which all gas plates must be upgraded. Often, such operations are implemented at the expense of municipal budgets (Moscow, St. Petersburg, Nizhny Novgorod).

      To get a complete picture of preferences and order installation of equipment, you should contact “Gorgaz”.

      Replacing gas aggregates for free:

      • If the stove is on the balance of municipal or state organizations;
      • If the homeowner has benefits, being the hero of Russia or the Soviet Union, a participant in the Great Patriotic War;
      • Also, the plates are changing the elderly people who do not receive any subsidies;
      • poor citizens whose income is lower than the minimum wage;
      • Citizens who live in unsuccessted households under a social hire agreement.

      Features Installation and Connection Gas Plate

        Before starting the work of the slab, the document “On Technical Inspection”. It is called “defective statement”. It is compiled, as a rule, in several copies. It should be records:

        • on existing faults;
        • The operation time of this device.

          After analyzing one-time preventive checks, the slab is compiled by a final document. Then an application is drawn up in the DEZ, which indicates the request for replacement. The DEZ employee must put a homeowner to the replacement for the gas appliance.

          Features Installation and Connection Gas Plate

          To replace yourself, you need to take the following actions:

          • Submit an application to the RAU of the Gaza City Service, where you should specify a request for the replacement of the aggregate;
          • From this organization will arrive a specialist who will appreciate the amount of upcoming work will write off the bill;
          • In the event that the homeowner put the slab on his own, he is obliged to write a request for a resolution to connect it;
          • After the account is received, it should be paid and agree on the time when the master comes and will do its job;
          • After mounting in the passport of the gas stove, the corresponding mark must be affixed.

          Features Installation and Connection Gas Plate

            In the future, the maintenance of equipment will only perform this organization, which is very convenient, it will also be responsible if any problems arise with the technique.

            Requirements for the room

            Snip claims the following order: put gas stoves can be in rooms, the height of which is at least 2.21 meters. Be sure to in the room there must be a window with a window opening.

            Behind the absence of the window in the kitchen, the presence of an exhaust, it should be sealed and available for cleaning. On the roof, the exhaust pipe towers at least 0.52 meters, the deflector must be present.

            The norms also argue that the size of the room in which the gas stove is located with two burners must be a volume of 8.2 cubic meters. If there are three working hardware, the room volume should be 12.2 m3; If the stove with four burners, then the size of the room is 15.12 m3.

            Features Installation and Connection Gas Plate

            In private houses, the possible height of the kitchen is no more than two meters, but should also be necessarily natural lighting. If all of the above requirements are not respected, it is necessary to coordinate with the supervisory authority individually.

            The stove is installed near the wall, which should not be combustible materials (plastic, wood and t. NS.) The distance between the stove and the wall should be at least 6.5 cm.

            Features Installation and Connection Gas Plate

            Walls can be covered with such materials:

            • Sheet steel (4 mm);
            • plaster.

            Features Installation and Connection Gas Plate

            Features Installation and Connection Gas Plate

              Isolation exceeds the size of the gas unit by 10.2 cm from all sides, as well as at least 82 cm at the top. For units without thermal insulation, the distance between the stove and furniture should be more than 16 cm.

              Before the unit should be a space of about 1.2 meters. Over the stove allowable to put an exhaust with a fan.

              Safety regulations

              Before applying hoses, they must be tested and see visually. You should also check the quality certificate and warranty coupons of the device. Connection itself should not have additional fittings, it is strictly forbidden. Sometimes the connection is made using pipes from metal, but it only happens in extreme cases.

              Features Installation and Connection Gas Plate

              The hose should not touch any fire hazardous surfaces or pointed corners. Sometimes it is possible to connect using a pipe, but it is rare in our time.

              The pipe compound uses special communications made of steel or copper. This connection is reliable and durable, but the stove becomes stationary, it can not be moved.

              Features Installation and Connection Gas Plate

              Required details and tools

              To connect the slate correctly, you should use such tools:

              • Special hose (1.7 meters);
              • Ball connection from brass;
              • Deploy keys;
              • pads;
              • screwdrivers;
              • Special tape for sealing;
              • Tassel and Tube with foam.

              Features Installation and Connection Gas Plate

              Features Installation and Connection Gas Plate

              Features Installation and Connection Gas Plate

              Features Installation and Connection Gas Plate

              Features Installation and Connection Gas Plate

              7

              Photos

              In places of compound, various gaskets play a major role, most often these are materials:

              • Thread “Lokatet 55”;
              • FUM-RENTA.

                Use best only those materials that are recommended by gas workers. The “Lokate 55” thread is a reliable material that ensures the correct fixation of the working elements in the most difficult areas. It has high density and plasticity (length can be from 14 to 162 meters), in places of threaded compounds it provides perfect sealing. In this case, the pressure in the pipe can be quite high. Universal material and suitable for any connections without any restrictions.

                Features Installation and Connection Gas Plate

                FUM tape is another type of sealing, which can withstand significant loads, it is made of a special fluoroplast 4D. Total tapes of three species.

                1. The first type is called “Mark 1”. It can be used in aggressive environments (acids, alkali and t. D.).
                2. Brand 2 best works in nodes where various oxidizers are present. No lubricant.
                3. Brand 3 – universal tape that can be used both in industry and in everyday life. In essence, it is thin threads that are combined into a film coating.

                Features Installation and Connection Gas Plate

                Features Installation and Connection Gas Plate

                Features Installation and Connection Gas Plate

                FUM type ribbons meet all the necessary requirements:

                • high resistance to high temperatures;
                • lack of corrosive phenomena;
                • durability;
                • lack of toxins;
                • Creating good tightness.

                Features Installation and Connection Gas Plate

                Procedure for performing work

                  Before connecting the slab to common communications in an apartment or in a private house, you should decide where it will be in the kitchen.

                  Paul under the stove should be made perfectly smooth, rational all to make a reinforced tie. Most plates exist legs that can be twisted, thereby adjusting the height.

                  Features Installation and Connection Gas Plate

                  While working is recommended to use a good German or Russian construction level. This is a simple tool that allows you to install the unit as accurately as possible. Sometimes under the legs put cardboard or phanel to the maximum align the gas device.

                  Features Installation and Connection Gas Plate

                  Another important condition that is desirable to observe – to the rear wall of the plates should not be close to adjust furniture or wall. All appliances must be available. If a malfunction arises, it will be easy to diagnose it and eliminate it.

                  The compounds in the area of ​​threads are wound up compositions that provide a hermetic connection for a long time. Linen and x / b fabrics in the joints of the joints are not used due to their small tightness. The fitting that has the necessary seal is screwed into the gas crane, the second end is connected to the gas stove output. Make this should a certified specialist from the relevant service. During the operation of the window, all sources of fire must be opened and removed and removed.

                  Features Installation and Connection Gas Plate

                  It is important to remember that flexible hoses must be within accessibility so that they can be easily visiting and checking. The sleeve should always be made strictly in accordance with the standards. Paint hoses is prohibited (material is deformed by paint), but you can be caught by applications.

                  The hose without adapters connects to the pipe and stove. Adapters appropriate to use if any non-standard connections exist.

                  Features Installation and Connection Gas Plate

                  When installing, you can use only special tools and consumables. Embedded nozzles on time connections must be carefully embedded, leaks should not be.

                  Features Installation and Connection Gas Plate

                  As a plug, a wet fabric is used, as water can be an effective insulator. After the installation is completed, all the joints are lubricated with soap solution to understand where the leak may be. If a quiet hiss is heard, then gas somewhere “pool”, in this case the emergency brigade should be called. It is impossible to eliminate such problems yourself, it is dangerous. Immediately make sure that there is no open source of fire nearby, electrical appliances are also better to turn off.

                  Features Installation and Connection Gas Plate

                  Dismantling of an old plate

                  Installation of the gas stove consists of several stages. First of all, you should dismantle the old unit. To do this, overlap the gas crane. After that you need:

                  • unscrew the gas supply hose;
                  • unscrew the lock nut, which is located on the vacation coupling;
                  • After that, the coupling itself is removed.

                  Features Installation and Connection Gas Plate

                  Features Installation and Connection Gas Plate

                  Features Installation and Connection Gas Plate

                    If you change the crane with your own hands, you should open a window and do all the work enough quickly. Work on dismantling simple and make it possible in a short period of time. Before the start of dismantling, prepare pieces of x / b fabric and wet them. They will need to create traffic jams.

                    Replacing the crane

                    Gas service workers advise to change the crane to the emergence of obvious problems in this node. Usually, the warranty period from the manufacturer is 10-12 years. Cranes There are a great set, but they are divided into two main types.

                    • Cork – These are the cranes in which the cone-shaped element (cork) works with a drilled hole. This design effectively allows you to overlap the gas flow.
                    • Cranes are also made Metals (brass, cast iron), Such nodes are resistant to corrosion and wear. During the opening of the node using the flywheel, the hole in the cone coincides with the hole in the pipe. This provides gas flow. When connecting cork valves and to ensure their tightness is used, as a rule, the gland.
                    • There are also cranes ball, The shut-off node is a metal hemisphere. There is also a hole, which when turning “falls” on the hole in the pipe.

                    Features Installation and Connection Gas Plate

                    Features Installation and Connection Gas Plate

                      The advantages of the ball crane:

                      • Democratic price;
                      • reliability and simplicity in work;
                      • strength.

                      Ball cranes are now sales leaders.

                      Features Installation and Connection Gas Plate

                      It is also important how the crane is attached to the gas pipeline. There is a flange fastener method when the mount is provided by special bolts. Most often, such a method is used when transporting cylinders. There is also a welded when the crane is tightly attached to the pipe with welding.

                      Features Installation and Connection Gas Plate

                      Features Installation and Connection Gas Plate

                      The most reliable cranes are brass ball and made of bronze.

                      Choosing a crane, you should pay attention to such indicators:

                      • pipe diameter;
                      • coincidence of pipe diameters and crane;
                      • No defects.

                      Features Installation and Connection Gas Plate

                        Replacing the crane takes an average of 10-15 minutes. Tools will be required:

                        • shut-off node;
                        • Gas keys (1 and 2);
                        • sealing means;
                        • screwdriver;
                        • solidol and graphite lubricant;
                        • plug;
                        • Fittings and adapters.

                        Features Installation and Connection Gas Plate

                        Features Installation and Connection Gas Plate

                        Features Installation and Connection Gas Plate

                        Features Installation and Connection Gas Plate

                        Features Installation and Connection Gas Plate

                        nine

                        Photos

                          During the valve should be twisted with hand, only the last pair of revolutions can be done using the key. Sometimes the old crane is difficult to unscrew, in this case it is recommended to drip the special composition of WD-42. It is worth waiting for 5-7 minutes, the solution is absorbed into the joints, and the mount can be easily unscrewed.

                          Features Installation and Connection Gas Plate

                          Installation

                          To correct the gas stove correctly, you should prepare a place where it will be. If the old slab is replaced with a new one, then after dismantling it should be examined by an old screed. If there are cracks or chips, they close “kerise” or cement mortar. New cement “patchwork” must dry up within three days. Only after that you can start the installation of equipment. It should be borne in mind that the kitchen or countertop must stand from the stove at a certain distance (16-20 cm).

                          Features Installation and Connection Gas Plate

                          The new stove is extracted from the package and examined. All moving elements are removed:

                          • bastard;
                          • lattice;
                          • pallet.

                            The legs are screwed to the device that are included. The stove is put on the prepared “pillow”. There must be a small distance from the wall.

                            Features Installation and Connection Gas Plate

                            To put a stove with an electric ignition, you should position the outlet in which there will be grounding. After installing the slab, you should make a soap solution and a tassel to anoint all the joints so that it is clear whether there is a gas leak or it is not.

                            Features Installation and Connection Gas Plate

                            Connection

                            Connect the gas appliance is easy, but do it with your own hands is prohibited. If the homeowner decided to make a connection independently, then he faces a fine of the supervisory organization. This has its own reason, because gas is an explosive substance that can destroy not only your apartment, but also a whole house.

                            Many trading organizations that sell gas stoves can make the aggregate. To install them, you should have permission from the appropriate supervisory authority. Be sure after the end of the installation, you should call specialists from a gas company that will verify the correct connection and make the appropriate mark in the document.

                            Features Installation and Connection Gas Plate

                            A special topic is the connection of the gas stove to the cylinder. By law, such rules must be followed.

                            • From the gas stove to the cylinder must be a distance of at least 1.6 meters. Often in rural houses, cylinders are located outside the house under a special canopy in the box.
                            • In the room there should be excellent ventilation.
                            • If cylinders are used, it must be connected to the downgrade reducer.

                            Features Installation and Connection Gas Plate

                            Examination

                              Check is done using a soap solution. It is best for these purposes to use a shaving foam, it will most effectively show the place where there is a loose connection. Foam is applied to all joints with a brush. If there is no bubbles, then the connection is hermetically.

                              Features Installation and Connection Gas Plate

                              How to install the gas stove correctly, look in the video below.

                              Rate article
                              ( No ratings yet )
                              Share to friends
                              Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
                              Add a comment