Corner kitchens from plastic: features and design

Each hostess knows that the kitchen should be not only beautiful, but also practical. This room has always increased humidity, in the air there are particles of fat and soot, which settle on all surfaces. For the kitchen, you must choose the right headset – they should be comfortable, spacious and easy to care. The optimal option is the corner kitchens from plastic, which are presented on the market in a wide range. They differ available to the price and attractive design, which explains their popularity among consumers.

Characteristic

Plastic is a polymer with strength, flexibility and water resistance.

Despite all the advantages, it is used only as finishes, and the basis of kitchen heads is several materials.

Wood

Products from natural wood are distinguished by durability and durability, but at the same time significantly increases their cost. For kitchens mostly use larch, spruce or pine, as they are resistant to moisture and putrefactive formations.

MDF

This material is plates made of wood sawdust and binder. MDF is widely used in furniture production, since it is resistant to moisture and high temperatures, so during operation is not cracking and does not swell.

In addition, the material is durable and not inclined to deformation.

Chipboard

The most fiscal option is wood chipboard. Material itself does not differ in high resistance to moisture and temperature fluctuations, but with the right finish, it may even be competition even natural wood.

Thanks to a small weight and convenience in treating from chipboard, corner kitchen headsets of any design.

Types of finish

Rolled

This type of finishes is the most accessible option. The huge advantage of rolled plastic lies in its flexibility and the possibility of separating the surface of any form, that’s just it is not characterized by high quality. This type includes the following materials:

  • Thin Polyvinyl Chloride Fillet (PVC), which is planted with a kitchen headset under pressure, protects the product from moisture and exposure to chemicals, so the surface can be safely cleaned by detergents, but it is important to use a soft sponge;
  • Acrylic film, the fastening of which is performed by the method of hot pressing; Its strength characteristics are slightly higher than PVC, while the thickness of the coating can be only 1 mm.

Sheet

The sheet type of material has increased hardness, durability and durability. Unfortunately, it is not suitable for finishing surfaces of complex forms, for example, bent facades headset. These types include several varieties.

  • HPL plastic, Presenting a multi-layer paper impregnated with thermosetting substances. It is great for the manufacture of corner kitchen heads, as it does not affect moisture, burning and temperature differences. In addition, the material is not terrible aggressive substances, it is easily cleared of pollution and is not afraid of mechanical damage.
  • Acrylic panels, Which are made on the basis of chipboard or MDF. First, a colored coating is applied to the main material, and then heated with a transparent acrylic. Often found panels with pictures that are printed on special printers. Acrylic panels possess the same properties as HPL plastic. In addition, they serve for a long time and do not lose their appeal. From the disadvantages it can be noted that the damaged elements of the kitchen cannot be repaired, and this beauty is very expensive.

Options for finishing the ends

In the manufacture of angular kitchens, it is usually plastic only facade and quite rarely – the back side of the items. To prevent damage to the heads, it is necessary to protect the ends, and this can be done in several ways.

  • Postforming – This is a technology that allows you to bend plastic under the desired angle to form a solid coating with a smooth transition. To do this, use the finishing material of this size so that it worst the upper and lower end of one or another furniture element.

  • Finish PVC or acrylic edge is an ideal option for an angular kitchen of any geometric shape. Due to the diverse color scheme, you can pick up the edge of any shade.

      • Aluminum profile – This is a metal framing that provides products for durability, moisture resistance and damage. In addition, the sash in the aluminum frame look quite stylish and suitable for creating kitchens in the style of Modern or High-tech.

      The design of plastic angular kitchens can be diverse, as the finishing coating can mimic natural stone, wood, skin, metal and other materials. In addition, the facades are not rarely decorated with drawings and give a special texture to the surfaces for special appeal.

      Plastic comparison with other finishing materials is waiting for you in the following video.

      Rate the article
      ( No ratings yet )
      Add comments

      ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: