Choose a chopper for corn

Be able to choose a chopper for corn important to any person who is engaged in its cultivation and processing. It is also necessary to understand the types of grinders (crushers) for corn in the cobs, its stems and outright residues.

Choose a chopper for corn

Choose a chopper for corn

Device

Corn crusher is usually designed to work in manual or automatic mode. Fully manual systems are found in small farms. Most often, the non-mechanized corn chopper can recycle not more than 100 kg of plant mass per hour. The automatic device has special electronic components that set this or that program. All such devices are equipped with an electric drive, can be used in large agricultural enterprises.

Sometimes even the supply of raw materials buckets in the tank does not justify itself. In such a case, the most rational application of the conveyor. Some settings are able to recycle up to 4 tons of raw materials. Despite a similar difference, the main structural elements are more or less than the same. These include:

  • The drum (inside which the grains are highlighted from the cobs);
  • Lultatic device (also helps pull grain from kochanov);
  • Container (Capacity for the collection of seeds);
  • Drive assembly.

Choose a chopper for corn

The drum is most complicated in its inner structure. It is distinguished:

  • Channel for loading (handing);
  • compartment under purified fruits;
  • Exit through which stalks and tops are emitted.

But, of course, this is just the most general description of the plot. Its working part is most often mounted on the engine itself. This device allows you to evenly process grain.

The frame is also played – the frame – this metal part allows you to maintain the stability of the structure. The external body protects the main mechanisms from unwanted impact.

Choose a chopper for corn

Choose a chopper for corn

Taking raw materials will be a metal bunker. To monitor the volume of the incoming mass, the valve is provided. The electric motor is connected to the mechanical drive. Exhaust corn grains rushed outward over a hole. But this does not end.

From the discharge auger, the product is taken to continue to do something with it. The type of working part determines the quality of processing. It is necessary to control the stones and other solid objects do not penetrate inside, otherwise the device service will be questionable. Grinding grain is driven through the sieve, and the cross section of its holes determines the envelope of grinding.

ATTENTION: All mechanisms and components in the process of use are wearing, because they require continuous care.

Choose a chopper for corn

Views

The most important thing is that all shredders share clearly on the homemade and factory technique. The second option is usually more productive. But the first is cheaper and flexible to specific tasks. IMPORTANT: Any view devices should spit only grain that has reached wax ripeness. It has much more useful substances than in the dried product. The cheek variety of chopper works due to the pair of plates. One of them is fixed hard, the other is rotated. Crushing the grain mass occurs when it is in the separating slabs.

Rotary models are arranged otherwise – they are maintained in them, as it is easy to guess, rotors with fixed hammers. Another type – conical devices. When the cone rotates, the grain falls on it. At the same time, the crushing of this grain is happening. Hammers differ from rotary by the fact that working parts are attached to the hinges. When a collision with them, corn fruits will split. In the roll system, the spatial is ensured by a run through special rolls.

Choose a chopper for corn

Choose a chopper for corn

How to use?

Failure of grain is produced when locked. After his receipt in the receiving bunker, the valve smoothly open. Next, in the working compartment, spinning knives will grind it. Crushed mass is driven through the sieve. Otherwise, the apparatus for stems is valid:

  • They are shipped in a rectangular hatch, located on the side;
  • The tops are skipped through special knives;
  • Ground mass turns out in the bunker.

Corn in the cobs crushed in a similar way. Raw materials are laying in a rectangular hatch. Thrust pushes the pillars to the work part. There they are bold knives with radial location. Grinding raw materials passes again in the bunker, and there it is fully prepared; For reassembly balances are buying completely different shredders operating in the field.

Choose a chopper for corn

How to choose?

Main criteria:

  • target appointment (work in LPH or in large economy);
  • Required power level;
  • device dimensions;
  • Total productivity per season;
  • reputation of the manufacturer;
  • reviews.

Choose a chopper for corn

Manufacturers

  • For agricultural enterprises of the mid-level, very well suited “Electrotmash from-05m”. The device is equipped with an 800 kW drive. For 1 hour up to 170 kg of corn. Up to 5 liters of grain is placed in the acceptance tank. Capacity of the working compartment – 6 l.

Choose a chopper for corn

  • Very well manifest itself “Khryush”. This Russian chopper compact. When it is created, proven materials are applied. The initial bunker accommodates up to 10 kg of product. Current consumption per hour – 1.9 kW.

Choose a chopper for corn

  • Farmer IES-25M:
    • Equipped with a motor with a capacity of 1.3 MW;
    • develops hourly capacity of 400 kg;
    • has its own weight of 7.3 kg;
    • regulates the level of grinding;
    • has no reception hopper.

Choose a chopper for corn

  • Alternative – “Thermix”. Such a shredder is equipped with a 500 kW motor. This allows it to handle up to 500 kg of corn per hour. The mass of the device is 10 kg. The receiving bunker accommodates 35 liters of grain.

Choose a chopper for corn

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment