All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

The vacuum cleaner is one of the most popular types of household appliances and is present in every home. However, when choosing a device, the main criteria that the buyer pays attention is the engine power and the overall functionality of the unit. The operating characteristics of the hose usually do not look, undeservedly ignoring this important working tool. Such an approach is foundally incorrect, and the life of the vacuum cleaner and the convenience of its use depends on the quality of the sleeves.

All about hoses for vacuum cleaner

Peculiarities

The vacuuming hose is an indispensable working link of the unit and is an elastic, well-bent pipe made of polypropylene or rubber. The length of the hose varies depending on the specialization and model of the vacuum cleaner, but in general is in the range of 1.5-2 m. One end of the sleeve is equipped with a short plastic adapter intended for fixing the extension rods and various workshops. The connection site of the elastic corrugation and hard tip is the most vulnerable area of ​​the hose: it is this plot in the process of operation of the unit most often cracks and rushes.

The second end of the hose is equipped with a special locking device, with which the sleeve is connected to the vacuuming module. But the locking mechanism is far from all models: many hoses are connected to the vacuum cleaner by means of a threaded connection. However, this technology is considered to be quite obsolete and practically not used on modern models. Hoses are not less popular, where the bayonet connection system is installed instead of the latch lock – the locking sleeve after a small turn clockwise.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Types and their characteristics

At first glance, it may seem that all vacuum cleaners are arranged in the same way, however, this is not so. Perhaps the only common feature is corrugated execution, which allows us to lengthen the sleeve as necessary. The differences in the models are much larger, the first of them is their diameter, which affects the power of suction. The more this value will be, the less efficient the vacuum cleaner will suck dust, and vice versa. Another, no less important feature, which is classified by the sleeves, is their specialization. According to this criterion, three types of hoses are distinguished.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Universal models

Represent the most numerous group of sleeves and are intended for carrying dry cleaning. Many of them are equipped with an option for adjusting the suction force, which allows to produce effective cleaning of various working grounds – from the Palas to the skin of upholstered furniture. Such models are available in two versions – simple and frame.

The first is a thin-walled corrugation that does not have a frame and preserving their forms Thanks to numerous turns that perform the role of ribbon. The advantage of such models is their low cost, low weight, good consumer accessibility and a wide range. The minuses include the likelihood of shuttleties during operation, frequent breakouts of corrugations and extension cords, low antistatic properties and some harness locks.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Universal frameless models include sleeves made of hard plastic. They also do not have a wire base, but due to the use of coarse plastics, they have high rigidity and badly bent. The benefits of such sleeves include their low cost, and among the minuses note the rapid appearance of cracks on bends and an ambulance breakage. In addition, when turning, such a sleeve can easily flip the vacuum cleaner, which is due to its imbibibility and practically complete absence of elasticity.

Frame hoses are a hard structure, which is based on the twisted wire fittings. The outer part of the hoses is also made of corrugations, which makes frame models flexible, elastic and at the same time very durable. The benefits of frame sleeves are a long service life, excellent elasticity and ability to stretch well. The minuses include high cost and complexity when performing independent repairs. The latter is due to the fact that it is enough to cut the burst hose for the repair of the Bailed and re-connect it to the tip or lock.

When repairing frame sleeves, it is necessary to understand more and with wire, which in the absence of a special tool is problematic.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Hoses for washing vacuum cleaners

It is somewhat different than universal models, and in addition to corrugations and frames are additionally equipped with a thin elastic tube designed for water supply. In addition to the tube, the sleeves are equipped with a trigger, with which controls the supply of detergent liquid and its number. The advantage of hoses for detergent vacuum cleaners is their multifunctionality, ease of use and high construction strength. The minuses include the fact that often such sleeves are made for some particular brand of vacuum cleaner and do not combine with other units. In such cases, you have to either use an adapter for connecting, or search for “your” hose.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Specialized models

Represent reinforced sleeves intended for industrial and construction. They have a rubber-tissue performance, equipped with a frame and equipped with reliable locks. The length of the technical sleeves is much higher than the length of household models and can reach 5 m, their inner diameter is 5 or more centimeters, and the working pressure reaches 0.5 MPa. This significantly expands the range of their use and allows you to effectively cope with serious large-grazing pollution. The minuses of industrial hoses include high weight and difficulty in repairing the repair.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Additional devices

Most vacuum cleaners are available in a standard configuration, in which, in addition to corrugated sleeves, include several of the most running nozzles, a brush and a telescopic extension knob. Such models are combined with most vacuum cleaners and do not have problems with the presence of spare parts: locks and tips. However, there are more “advanced” samples equipped with a number of additional features and devices. So, some hoses are equipped with an electronic or mechanical control panel built into the handle. It has a suction power regulator and a fluid pressure switch for detergent models.

The presence of such options allows you to control the process, without leaving to the vacuum cleaner.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

An optional equipment should be noted a wall hose holder. The device is made in the form of an arcuate metal gutter, which allows you to place a vacuum cleaner hose in it. The device is made of stainless steel and mounted on the wall of a niche or shopping room. The hose, placed on the holder, does not twist and is not climbed, due to which it serves much longer than its analogues, which were stored in cramped conditions in folded in half

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Choice rules

Choose vacuuming hoses should be solely in accordance with the aggregate model. This is due to the fact that even within one brand, the diameter of the sleeves can be different. In addition, the design of the latch lock or the compliance of the bayonet compound grooves may also not come. The same applies to hoses for the car vacuum cleaner, so despite the assurances of sellers of versatility and compatibility of fastening, it is better to be restrained and acquired a hose designed for a particular model.

Even with the apparent identity of the “native” and “non-rigging” hoses, the connection may turn out to be lenked and starts to subduct air.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

The following selection criteria is the length of the sleeve. The convenience of using the vacuum cleaner and the possibility of cleaning in hard-to-reach places will depend on this important parameter. The sleeve should not be too short, but not very long: the optimal is considered the length of one and a half meters. Such a size leaves a place for the vacuum cleaner maneurus and allows cleaning of both high cabinets and spaces under the sofa.

Another, no less important point is the selection of the hose material. It is not recommended to acquire too thin corrugated sleeves made from low-grade Chinese plastic. Such models can crack at the first cleaning and, most likely, will require replacement. But too hard frameless lads do not choose. They practically do not bend, because of which they strive to flip the vacuum cleaner, and when performing cleaning in hard-to-reach places, they can burst at all.

The perfect option will be a corrugated frame model made of elastic plastic.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

Operating tips

In order for the vacuuming hose to serve as longer as possible, It is necessary to comply with a number of simple recommendations.

  • It is strictly forbidden to tow the vacuum cleaner for the hose. This can lead to cracks on a corrugated surface and to its rapid rupture.
  • You can not bend the sleeve for an invalid angle, as well as step on it. Due to the considerable weight load, the frame inside the hose may be deformed that it will later lead to premature abrasion of the upper polyurethane layer.
  • If the sleeve, when cleaning synthetic coatings, is strongly electrified, remove the static voltage will help the purchase of antistatic hose and couplings, as well as mandatory grounding of outlets.

All about hoses for vacuum cleaner

All about hoses for vacuum cleaner

  • Store vacuuming hose follows in a special compartment of the box in which the device was sold. If the sleeve is not supposed to be disconnected from the unit, it must be inserted into a special fastening located on the vacuum cleaner. In addition, storage should be carried out at a temperature recommended by the manufacturer. Place the hoses near the heating devices and open fire, as well as keep them in negative temperatures prohibited.
  • With a decrease in the suction force and the appearance of a characteristic whistle, it is necessary to check the sleeve for the jams of large garbage, such as paper or cellophane package.

When the latter is detected, the hose must be pulled out in a horizontal direction and with a long rod or metal wire, clean.

All about hoses for vacuum cleaner

About how to repair the hose of a vacuum cleaner with your own hands, look in the video below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment