All about reproduction of honeysuckle with cuttings

Reproduction of honeysuckle with cuttings in spring is considered a simple and efficient way. But for the success of this procedure, it is necessary to pay enough attention not only to the landing itself, but also the selection of used shoots.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

Choosing a parent plant

Correctly selected parental plant ensures the rooting of the material on the open soil. Besides, The use of silk precisely allows you to almost completely maintain the outstanding characteristics of the maternal bush. In order for the reproduction to be successful, it is initially necessary to choose a bush of a larger variety, characterized by health and fortress. No less important is the absence on the plant of traces of diseases or insect vital activity. It is necessary to evaluate all the characteristics of the variety in advance: how large and sweet fruits grow, whether it is afraid of low temperatures and whether it copes with a long lack of watering.

By the way, if it is planned to divide the rhizomes, then the age of the copy must reach at least 5-6 years. In other cases, you can give preference to younger bushes.

All about reproduction of honeysuckle with cuttings

Types of Chernkov

Split honeysuckle is offered by two types of shoots: green and weird.

Green

Green material for culture breeding is going on the junction of spring and summer, when the flowering came to an end and the formation of uncess. This period, however, in some regions can be shifted to the interval from mid-June to mid-July. Before separating cuttings from the mother’s bush, they should be checked. A simple way proposed to try to bend them: the more elastic will be the branch, the worse it will be rooted. It is recommended to take only that vine that breaks on bends.

In the future, the selected shoots will only be involved in the middle part. It is also worth mentioning that it is better to use one year old shoots that are actively developing, and therefore rich in nutritional elements. The diameter of annual growth should be at least 1 centimeter. It should not cut the twigs too early, since very young shoots are quite poorly rooted. Soft and grassy bureaucas for breeding does not fit.

Fragments of branches from 7 to 12 centimeters, having at least 3 interstices, in each of which have a kidney with a leaflet. Crapping the vine, it is necessary to trace the bottom of the workpiece to be cut at an angle of 45 degrees, and the top remained straight and rummaged over the kidney at a distance of 1.5 centimeters. In addition, a leaf plate is necessarily removed from the lower node, and on the other two it is shortened by half. The lower part of the workpiece must be treated with “rhizin” or “heteroacexin”. These drugs stimulate the appearance of roots, and also provide protection against infecting fungi and the development of rotary processes.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

Owned

Some gardeners prefer to grow by the cultivation of honeysuckle with the help of weathered twigs. They are going twice a year: either in early spring, when the kidneys will not start opening, or in late autumn, after the completion of the leaf fall. When it is to cut the cuttings, each feeder of the honeysuckle decides independently, focusing on the weather conditions of its own region. It is preferable to choose all the shoots that have already turned 2 years old and more, cutting the twigs after they cover the rough brown or gray shades. Nevertheless, too old specimens should not be taken, as they barely produce roots and almost never take.

If the case is happening in the fall, then it takes a length of about 20 centimeters, possessing 3-5 interstices. For spring collection, it is characterized by the use of cuttings shorter: a length of 10 to 12 centimeters. The upper cut in such billets is made direct, at a distance of 0.5 centimeters from the kidney, and the lower – at an angle, and it is necessary to retreat from extreme kidneys by 1.5 centimeters. Prepared material requires special storage conditions.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

First, all twigs are folded into the box filled with wet sand or sawdust, and then they are carried away to the basement. You can wrap the fragments of shoots in the burlap and also to be in a cool place. Finally, part of the summer residents prefers to pinch the blanks in the spring in a garden trench.

Whatever the substrate in which the cuttings are buried, it should be pre-impregnated with biological fungicides, which will prevent the development of fungal diseases. It is necessary to mention that weedly shoots are coarse and dry, and therefore quite slowly form the root system. The seedlings obtained from them have low immunities, are often subjected to pest attacks and get worse. Therefore, similar cuttings are used most often as a workout. Then the dackets make a choice in favor of green copies. Some gardeners prefer combined shoots – cuttings with part of annual branches. They are cut after the completion of flowering, usually at the end of May or even at the beginning of the summer.

It is allowed to use blanks already having 1-2 small branches. Root and take up in a new place they will be better than the weird, but still worse than green.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

Terms of drawing

Green cuttings collected in the spring, it is necessary to immediately plant on the extension. But if we have been selected for reproduction, it is necessary to store them until the first days of spring, and then plant it in the container and begin to germinate. Directly shine, that is, to plant seedlings obtained from blanks in open soil, depending on the climatic features of the region.

Typically, the transportation of young bushes on the bed occurs since the end of summer and almost until the end of October. The warmer the region in which the honeysuckle is grown, the later you can implement the final procedure, since the plant will still have time to come across a new place.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

Features of the procedure

After the branches intended for green cuttings are cut, it is necessary to immediately remove them from the sun and arrange in water tanks to slow down moisture evaporation. An alternative can serve a bucket, the bottom of which is laid out with water with water and covered with paper. The billets are then cut according to the scheme indicated above, be sure to be disinfected and acute tool. At the next stage, they should be rooted. Usually, the extensive twigs are located in pots or drawers, tightened with film or covered with plastic bottles, although you can try to organize this stage and in the greenhouse.

To stimulate the appearance of the roots, the first interstitial is necessarily processed by a special. For example, for this purpose, in 1 liter of water divorces from 50 to 200 milligrams “Heteroaceuxin”. The cuttings are kept in a solution of 12 hours or even a day, but there is no sense to soak them: enough so that the lower 2-3 centimeters soak. At the next stage, the blanks are immersed in the soil until the first intercause, while the angle is equal to 45-60 degrees. Between individual cuttings, a gap of 4-5 centimeters is preserved, and the space between the rows is from 7 to 10 centimeters. The container is necessarily tightened with a food film or covered with a half of the plastic vessel. Happy Coating will need to raise, especially in hot and sunny days to ensure the honeysuckle.

Soil for planting cuttings should be loose and breathable. It is important to have all the necessary nutritional elements and high humidity. For culture, it will suit both ready and taken from the garden substrate, complemented by sand and organic. Well manifests itself a combination of peat and sand of a large fraction. The components are activated in the same proportions or sand is used 2-3 times more. The prepared substrate is disinfected only with a boiling water or a pale pink manganese solution, after which the layer of 5 centimeters per universal soil is added.

At the bottom of the packaging there will be a laid out of the drainage layer of pebbles or rubble. It should be added that the cuttings of the culture will also be able to germinate in water.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

The wand is immersed in liquid to the first intercause. Water varies periodically and complemented by stimulants. When the sprigs snap the roots, it will be possible to position it in a pot or in a greenhouse. Before the transplantation on a permanent habitat, the cuttings must regularly irrigate: every day with the sun and every other day in cloudy weather. Several times a day of the landing will have to spray from the sprayer to withstand the level of humidity equal to 95%. The rooting material should not be under direct sunlight: to create the shade, it will be enough to attach to a polyethylene film from the inside a couple of layers of gauze. After the occurrence of roots, care is reduced: spraying stops, and irrigation is carried out as the earth dries.

When a well-developed root system will have a well-developed root system, it will be able to sear it on the outdoor ground. Such a stress procedure is carried out in the fall, since the shrub is at that time in a state of rest, and therefore with less losses transferring transplants and injury to the roots. In reproduction with weathered cuttings, the material is rooted in the loose soil in such a way that 1-2 kidneys remains above the surface. The distance between individual copies should reach 10-20 centimeters, and the dimensions of the rod – 20-25 centimeters. The planted material is perfectly irrigated and mulled with peat or humus. While shoots do not appear roots, they water every day. In the future, the seedlings will need a weeding, irrigation as needed and even feeding. Landing for a permanent habitat can be held in the fall, if the honeysuckle is growing enough.

All about reproduction of honeysuckle with cuttings

All about reproduction of honeysuckle with cuttings

Recommendations of gardeners

To raise the honeysuckle at home, it is necessary to initially use only a healthy material taken from strong maternal plants, as well as ensure proper care landings. The big plus will be stimulating the formation of roots, including discarding special drugs. Pots in which seedlings develop, better keep in a shaded and cool place.

Growing will be successful if watering will be carried out in the morning, with the result that moisture will be able to evaporate all day, settled on the sheet records.

It is extremely important to withstand a sufficient gap between separate cuttings and not forget about hardening before landing in an open ground.

All about reproduction of honeysuckle with cuttings

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment