Varieties and installation of piano loops

Despite the fact that the piano loops today is considered to consider the acquisition of their age in the club, they are still quite often able to meet in new furniture. In this article we will talk about the features of the design, appointment and method of installing piano loops.

Varieties and installation of piano loops

Features and destination

The piano loop is a frequency mechanism that is used in the production of furniture and other items of life. It provides the ability to install hidden fasteners. And it can be used when the remaining mechanisms are not able to withstand the weight of the element.

Contrary to the fact that in modern furniture manufacturing a huge number of other canopies are practiced, the device presented continues to be in demand.

Varieties and installation of piano loops

Varieties and installation of piano loops

Piano loops are also called card. These are single-coat multiple structures that have 2 plates in their composition. One side is fixed from the inside of the facade, for this you can use the method of the oster. The other side is fixed to the end of the side wall of the housing on the furniture product.

Varieties and installation of piano loops

Advantages and disadvantages

During the existence of data loops, many people appreciated the strength and reliability of this type of fastening. Consider the following positive points:

  • the ability to withstand various loads and the impressive weight of the facade piece;
  • provision of additional stiffness;
  • affordable price;
  • The location of the fastener is almost not visible.

Varieties and installation of piano loops

Varieties and installation of piano loops

In addition to the listed positive qualities, card loops have disadvantages. They also need to become familiar with them before buying products, although the minuses and do not greatly affect the installation. You can note the weaknesses:

  • uncomfortable installation;
  • The piano loops are too large, as a result, often remind of furniture of the USSR era.

Despite all imperfections, piano loops do not allow distances during use. The load is distributed proportional to the entire length of the product. All modifications of piano loops are distinguished by their reliability, even fine leaf steel products.

Varieties and installation of piano loops

Scope of application

These devices are perfectly suitable for installation on the intensively operated doorways, as well as furniture doors and drawer cover, which regularly replete and impose. They are really indispensable in rolling structures that need to add additional rigidity.

Varieties and installation of piano loops

Varieties and installation of piano loops

Here are a number of examples where they can be practiced:

  • Security and fire doors;
  • Spreading partitions in the form of harmonica;
  • Operactions of fences, cell doors;
  • Threaded sidewalls of the hood of the tractor;
  • entrance doors to showers, basement, storage rooms, sheds;
  • hatches, instrument panels and other equipment of ships, yachts, aircraft;
  • cabinets, folding seats, folding tables, books, books, chests, ottomans;
  • Inventory boxes, toys, tools.

Varieties and installation of piano loops

Review of species

Based on the design and sizes of furniture facades, suitable piano loops are selected. Special classification for card loops is not provided. In many respects they are divided by production material. Here you can highlight the designs made from:

  • become;
  • brass;
  • nickel;
  • stainless steel (stainless steel);
  • aluminum;
  • Alloy using all sorts of galvanizing.

Varieties and installation of piano loops

In an option with zinc, the technology of galvanizing a variety of alloys. Galvanized loop can be like brown, black, red, yellow, white, and accurately reproduce gold, silver, bronze and other.

Varieties and installation of piano loops

Varieties and installation of piano loops

Steel is endowed with the greatest fortress, sold at a reasonable price, but it is unstable to the formation of rust in unstable conditions. Such hinges are recommended to be used in a controlled medium, for example, inside structures where the normal temperature and humidity level is maintained.

Varieties and installation of piano loops

Varieties and installation of piano loops

Stainless steel also has great strength, and it is also resistant to corrosion in a medium with high humidity and outdoors. Unmodizing card loops comply with hygiene requirements, which makes it possible to practice them in food and medical equipment. In addition, they have a beautiful satin finish or have a glossy polishing.

Varieties and installation of piano loops

Varieties and installation of piano loops

Brass is not amenable to the formation of rust, stable to oxidation and very decorative. But it has less durability, if you compare it with steel and stainless steel. Aluminum is a light metal having high anti-corrosion characteristics. Aluminum loops are distinguished by aesthetics, low cost, but with significant loads they are able to bend, as a result of which are not suitable for use in heavy door systems.

Varieties and installation of piano loops

More products can be systematized by dimensions, dividing them in length, width and thickness. Pay attention recommended on thickness characteristics. There are ordinary loops or reinforced, made of thicker material.

Dimensions

The height of this fastener ranges from 100 to 3,500 millimeters at a step of 15 millimeters. The thickness of the loops can reach up to 1.5 millimeters, the width parameters are within 20 to 40 millimeters. The reversal radius of this design is 90 °.

Here are standard hinge dimensions:

  • Height: 100, 250, 500, 815, 1000, 1700, 3500 mm;
  • Width: 20, 25, 28, 30, 32, 35, 40 mm;
  • Thickness: 0.fifty.7, 0.8, 1.0, 1.5 mm.

When devices are not suitable in length, they are usually cut under the desired facade size.

Varieties and installation of piano loops

Installation rules

When the loop is made in accordance with GOST, it will be extremely strong, reliable and high-quality. However, choose the photo on the Internet is not the best option. Favoritely visit the outlet, check the mechanisms to the touch, experience their performance in place.

Before starting the installation of card loops, you should prepare the following tools and materials:

  • installed mechanisms;
  • screwdriver (if there is no, you can apply an ordinary screwdriver);
  • A set of screws for fastening (a large number may be required);
  • line and sewer to mark the surfaces.

In addition, an electric drill and a drill on 8 millimeters may be required for the Zenkovka. However, the Zenkovka will not need if the hole on the loop is in checker.

Varieties and installation of piano loops

Varieties and installation of piano loops

The positive point for these mechanisms is the fact that almost always with their installation there is no need to do the grooves in the furniture facades – it is enough to install accessories by overlay. If you do not know how to do this, then this step-by-step instruction will be able to help you:

  1. Take a loop, the length of which will accurately correspond to the length of the facade of furniture;
  2. Attach it to the facade and, making sure the correct location, through the usual selection, mark the places for fixing the screws (press much);
  3. using a screwdriver and screws, carefully fix the invoice in such a way that it does not shift in space;
  4. Before the final tightening, once again make sure the card fittings are really right.

Each card hinge mounted at this stage is screwed to the furniture facade in the same way. You can control the process using a small building level.

Do not forget that the first must be screwed to the extreme screws, and only after checking the accuracy of the door location in relation to the case, you can slowly tighten the rest.

Varieties and installation of piano loops

Varieties and installation of piano loops

Useful advice

To the installation of piano loops, it is necessary to take with all attention, because they will not be able to adjust them, even if it is strongly wanted. The impossibility of adjustment is due to constructive features, so from the very beginning you need to achieve an even location of the door in space. To create conditions for long and stable work loops, remember the timely maintenance – lubrication.

Varieties and installation of piano loops

If the mechanisms are trying to shake during use, you should not immediately dismantle them and install new items. As a rule, such foreign sounds are associated with the lack of lubricant inside the hinges. Furniture accessories can be lubricated by a special aerosol or WD-40 automotive lubrication, which can be purchased at any auto parts store.

For more information about piano loops you can view in the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment