Features of internal loops

When assembling furniture, high-quality fittings ensures at least half of the success. That is why, buying internal loops, it is necessary to approach the choice as carefully as possible – correctly picking up the fastener, you will ensure the correctness and unhindered smashes, while the door will open exactly and neatly. Such loops are also called depositors, they are used for fasteners of thick facade cabinets and glasses. In this article, consider the features of the internal loops.


If we consider the functional purpose of overhead loops, then several varieties are distinguished.

  • Furniture. They are used in the manufacture and assembly of furniture structures. They allow you to ensure the breaking of the facades at 45, 90 or 110 degrees. The element is mounted on the cabinets in which the doors are placed inside the furniture housing.
  • Door. They are used when installing interior or entrance doors. Such fittings ensures maximum protection against unwanted penetration into the closed room from the outside.
  • Mortar. These internal loops are attached to the garage gates, gate, as well as to other similar purpose designs.

In addition to the destination, the inner loops can differ in a number of foundations.

  • Closer. Outdated, as well as modern cheap models, as a rule, do not provide for the closer in the set, which significantly reduces their technical and operational parameters. Solutions with closers repeatedly reduce the noise when used, ensure the smooth closure and as a whole increase the ease of use of the device.
  • Manufacturer. Even if you initially you are going to purchase budget furniture, you should not install accessories from a cheap segment – such products will not last long. Among the main leaders in the manufacture of contributing loops, BLUM, HETTICH, as well as Boyard.

Regardless of the variety, any of these products have their advantages and disadvantages. Positive qualities include the following:

  • When the door is closed, such loops are invisible;
  • From the outside of the doors there is no access to hinges;
  • Furnitura reliably protects against the action of atmospheric precipitation, the exception is the loops mounted on the gate and gate.

The following are allocated from the disadvantages:

  • limited angular angle;
  • Mounting complexity;
  • high price.


Most of the contributors have identical dimensions of the landing bowl – it corresponds to 35 mm. For them is a special drill. However, The size of the design may vary – also obtained the distribution of the loop 16 mm, 14 mm, 12 mm and 10 mm. Deposit loops of small sizes are mainly used for the production of furniture facades, wardrobes, as well as kitchen headcases. More massive fasteners are installed in the input and interior doors. And also in some designs use loops with non-standard design and any original design, as a rule, similar options are much more expensive than typical.

Internal loops of all sizes are made of durable alloy. He got the name of Cam (according to the first letters of metals included in its composition). Accordingly, it is an alloy of zinc, copper, as well as aluminum and magnesium. This mixture is characterized by increased strength, smooth surface, high wear resistance and absolute safety for people. By the way, the same alloy is often used to produce the rest of the furniture accessories, mechanisms and fasteners. From above, they are covered with nickel-plated or brass compounds, it is allowed to issue internal loops of any metal size with plastic parts.

Use of use

Deposit loops have a fairly wide scope of use. They are attached to the doors of various types, as well as furniture facades. The cause of their demand is based on the fact that they do not spoil the decorative attractiveness of the furniture object or the aesthetic look of the door. Such structures can withstand the same high loads as overgrown, but at the same time they open freely, simply close and, if necessary, fixed in the desired position. Fasteners are high accuracy that does not allow spontaneously disconnect the door with the case.

Since this design is placed in the door focus, respectively, it is much more difficult to get to it – which means it is difficult to break it.

Tips for choosing

The choice of suitable loops should be carried out taking into account the structural features of the product. It is necessary to take into account the functional purpose of the interior items, as well as the following factors:

  • Material from which furniture is made;
  • Intensity use.

Selecting the hidden fixtures for the furniture headset, it is necessary to focus on its dimensions and be sure to clarify which weight load elements can withstand. So, in kitchen cabinets and bedside tables most often put lightweight doors, so the fittings in them most often happens to be small.

To fix the sash of a wardrobe or a false, will need more bulky and heavy copies.


Mounting methods of different types of loops may differ among themselves. Let us stay more on the rules for installing furniture and door mechanisms.

During the installation of the furniture loop, follow these steps:

  1. First, markup is applied to the mounting place; Since fixation is performed on a cup and a response, which are attached, respectively, on the facade and the box, then the markup will have to apply both surfaces;
  2. The second stage includes drilling holes for the loop cup, as well as fasteners; For this work, you will need a drill with several nozzles, as well as the drill of a suitable size;
  3. Next, you need to install that part of the loop that is equipped with a cup, and then consolidate the retaliatory bar;
  4. At the final stage, the loop is performed, it must be performed in three directions.

Installation of door accessories includes the following steps of work:

  1. To secure the depositable door hinges, you need to place the location of the loop on the side of the door web, as well as at the corresponding height of the door frame; For maximum speed and simplicity of such markup, it is better to use specialized templates;
  2. With the help of a milling tool (in the case of its absence, the chisel and ordinary hammer) in the canvas, the wood fragment is neatly removed and the recess is formed; If the installation is performed on the metal door, this loop must be located between the trim and directly by the web;
  3. then drill drill holes for fastening elements;
  4. On this work is almost completed, it will only remain to fix the loop and perform its adjustment.

Important! If you are not sure of your own forces, you can use the services of professionals – the Master will be able to quickly and inexpensively secure accessories on the doors, wickets and furniture facades.

How to install an inner furniture loop, you can learn from the video below.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: