Choose handles for sliding doors

Sliding door coupe have a number of advantages. But the differences in the design make it impossible to use the same handles as on simple doors. It is very important to figure out in all the subtleties in advance, even before installing the door.

Main varieties

Pens for sliding doors are made of mortar and rather reminiscent. Such item can be taken with your fingers to close or open a passage. There are 3 main variants of similar handles:

  • independent (for interroom doors);

  • independent (for entry into the house or apartment);

  • Curling structures supplemented with latch.

In the first case, the castle or the latch is not provided. So that there is no spontaneous opening or closure of the door, usually the magnets are used. But in separate designs they do not apply. The advantage of using an independent handle of this type for the door-coupe is the simplicity of the device. The lack of mechanisms allows to provide:

  • reliability;

  • ease of installation;

  • Price availability.

Full independent handles are mounted inside the door of the door and do not go beyond its contour. This allows you to guarantee the opening of the sash even on a slight area. But such a solution does not allow full use of a cassette sliding door. Its canvas 100% goes into the pencils, located inside the wall. Open a pass can only be due to the use of additional handles.

Cutting handle, complemented by a latch, is used on bivalve sliding doors. Such a device implies the use of mechanisms to open the opening, if there is a need. For swing doors, handles with latches are not suitable. Most often, the latch is out of the response, it is required to rotate the round button. But in separate modifications it replaces the moving slider.

Whatever the managing element has chosen the developers, it must be placed in the deep part of the handle. This allows without any problems to use the door even where there is little space. Another option is a sliding door handle that always has a hole under the locking well. In some versions even embed something like a cylinder.

Basically, accessories of such types are used on a sliding double door.

Types for certain types of doors

The diversity of the design and principle of action of the handle is associated largely with the difference between door models. Most of all modifications created for glass doors. Many of them are equipped with an extracted larva. To install such detail, you need to drill glass. In the hole using the nut-fitting fasten the handle itself, and to locate it, you need to rotate the key.

Cutting door handles for interior doors are a push version that looks outwardly resembles a lever. The movement of the lever can be opened or locked the latch. Opening of the flaps sometimes happens by simply pressing the handle. When installing, the product uses a patch or outlet. But the swivel handle can be used both by itself, and from the inside (when the outside – push handle).

Rewousing product may be like a sphere or cone. Opening is done with a small turn – hence the name. But there are more protected types of devices that actually represent a type of castle. Similar handles received the common name “Know”. Geometrically they are close to turning structures, but equipped with a latch blocking constipation. As a rule, mortise shoes use so that you can close the door from the inside. Therefore, they can be seen in the bathrooms. To control the blocking (and remove it if necessary), it can be used:

  • button;

  • larva;

  • Additional rotating device.

Materials

In the manufacture of handles, putting on sliding interior doors, can be used:

  • Black and non-ferrous metals;

  • wood;

  • glass;

  • plastic.

Metal structures are most popular. This is due to their strength and reliability. Mainly apply mechanisms made of stainless and galvanized steel, bronze and silumin. The last option is not recommended, because an attractive appearance will be preserved very long. In addition, the silum’s handles are easily destroyed – so the savings when buying illusory.

The best option all experts recognize the stainless steel. As for the color of the coating, everything is simple – the canvas itself is selected. Sliding structures are quite widely used brass.

This alloy helps to achieve a very pleasant appearance. He is comfortable to the touch.

If the room is decorated in the spirit of high-tech, more appropriately in it will be handles for jewelry doors made from anodized aluminum. At the same time, in the premises of other styles, it is necessary to carefully be careful. Plastics products are well combined with PVC cloth. Glass and wooden structures are applied limited due to low practical characteristics. They are needed mainly where the non-standard door is set and therefore the original approach to the decor is required.

Products of products and their features

Handles with a latch (or, as professionals say, with a falevo tongue), Contain such details:

  • handle;

  • Basic element – socket or decorative lining;

  • Square pin (profile);

  • Screws for connections.

The face variety of handles is used in cases where the usual version with the latch will not work. It is needed if the sliding door completely plunged into the wall. In the range of outlets and in technical descriptions, such an object may be called otherwise – end grip or finger handle. In all three cases, we are talking about one product. If you need to select a knob for sliding doors with a locking mechanism, you must first determine the principle of operation.

Mechanical systems are valid due to the latch. To close the door, you need to use a special key. The advantage of such a product is high wear resistance and the possibility of continuous operation. Magnetic locks of the simplest sample can also be installed in interroom doors. Inside there are powerful permanent magnets, opposite which is a steel plate or magnet with the opposite sign.

But the electromagnetic constipation does not justify itself. It is expensive and used mainly in office and administrative premises. If the electrical current is disabled, the system will not work. By the way, on the sliding doors you can only put the mortise knobs.

Any other type of design will not allow the sash to go to the end to the penalty, therefore the opening will be partially busy.

Additional recommendations

If you need to create the most luxurious interior, you can use pens painted under platinum. Sometimes they are decorated with rhinestones. But it is important to understand that such decorations are acceptable only in the classic interior. The sliding door of the cabinet compartment, like the interroom door, can be equipped with a profile handle (there is no lock, no lock). However, the profile element for the cabinet is made open, and only handles with closed execution are put on the interroom.

Most often profile handles are put on both vertical doors. The number of constipation is determined according to the number of sash and their movement schemes. There is no point in putting these details where no one will see them. When you need to choose really attractive and looking perfect designs, we must give preference to the collections of leading Italian firms. Famous Russian and Chinese suppliers, however, have launched a production of no less good-quality products, although it looks often easier.

About how to embed the lock with handles in the sliding door, you can learn from the video below.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: