Pots for seedling: species and tips for choosing

The modern market of garden accessories offers a huge selection of pots for seedlings. Experienced daches, as a rule, have already tried many of them and decided on the choice. However, novice gardens, due to the lack of knowledge and experience, often can not give preference to this or that species, because of which the problem of buying suitable capacities is still relevant.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Requirements

As you know, the future crop depends not only on the quality of the seed material. Great influence on the growth and vegetation of plants are the conditions of landing, germing and dive of young shoots. In this regard, there are certain requirements for the seaside pots, which are clearly compliance with which can serve as a guarantor of good germination and proper development of sprouts. The pot for seedlings should keep moisture for a long time, but at the same time provide timely and fast removal of its excess. This is ensured by the presence of special holes in the bottom of the tank, due to which excess water leaves the pot.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

The second prerequisite is the sufficient depth of the capacity required for the free growth of the roots. In the constricted conditions, root processes begin to be touched and worse to absorb useful substances, which ultimately leads to a slowdown in shoots. The third important requirement is the wide neck pot, allowing painlessly transplanting young plants into an open ground, taking them out of the tank along with the land. And the latest important criterion is considered the size of pots. They should not be too voluminous and occupy a lot of space. It is dictated by a large number of seedlings and the need to place each of the plants closer to the light. When using the volumetric pots of space on the windowsill may simply not be enough.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Varieties

The classification of seedlings is produced by three features: manufacturing material, form and size.

Materials

According to this criterion, the capacity is divided into several types, each of which has its own specifics, has several advantages, and, of course, has some flaws.

The most common material of the seedlings is plastic. For the manufacture of products, polystyrene is used, not separating toxic substances and not containing poisonous components. The bottom of the plastic pots always has perforation, which contributes to the free removal of excess water and protects the roots from the posting. Products are often sold with sets and equipped with a shared pallet taking excess fluid and protecting windowsill from moisture.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Molded plastic pots are suitable for growing many cultures and are the most numerous category of seedlings. The advantages of such models include the creation of an optimal moisture regime in the soil, the possibility of using over several years, reliable protection of roots from possible damage and ease of storage. Moreover, many models are equipped with a retractable bottom, with which the plant is easily extruded from the pot together with the Earth. It should also be noted the low casting cost, a wide variety of types and sizes, small weight and wide consumer accessibility.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

So, in online stores to order a black pot at a price of 1.7 to 5 rubles per piece, in retail chains, the cost of 200-gram pots is 6-7 rubles. One of the most famous domestic manufacturers of plastic pots for seedlings is the company “Amina Trejd” from G. Smolensk, producing its products since 2008 and offering consumers products at prices by 40% below the average.

Along with a large number of advantages, disadvantages of plastic products still have. These include some bulky of round samples, occupying the useful space of the window sill, and the need to albeit small, but the cost of their acquisition, unlike self-made models made from undergraduate materials.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Peat pots are no less popular among summer houses and are present on the shelves of the department for the garden and the garden in a wide variety. In terms of its composition, the container consists of peat only 70%, despite the past 30 occupies cellulose and humus. In the process of manufacture, all components are mixed, laid in forms and dried, forming ultimately durable tanks, in appearance resembling cardboard. The advantages of peat pots include the absence of the need to extract the plant from the container before landing in the open ground. To do this, it is enough to place the pot with a seedl of dug-out deepening and sprinkle Earth. After 30-35 days, the peat overtakes and turns into a valuable fertilizer. Thanks to this, peat pots are often used to grow specially pepped crops, such as zucchini, pepper and eggplant.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

The disadvantages of models include the rapid deoxidation of the walls of the pot with abundant irrigation. It is also a great probability to acquire a fake or low-grade goods, in the manufacture of which the proportions of the components of the components are rudely broken. The latter is fraught with the following complications: After the transplantation into the ground, such pots do not pass oxygen to the roots of the plant and do not allow them to break through the thick layer of coarse cardboard. As a result, the escape begins to stick and dies, and the summer houses are found in the Earth the remains of indecomposable wake-up cardboard.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Pots of own production are an excellent alternative to purchased products and at all are not inferior to them in their operational characteristics. Thin plastic glasses from sour cream and yogurt are most common and affordable manufacturer. In order to use such a plant for planting seedlings, it is enough just to do in its foundation 2-3 holes and fall asleep the land in the container. The advantages of improvised pots include cash savings and the possibility of multiple use of containers, and among the minuses, the risk of soil moldiness is noted.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

The next line of the rating of homemade rampants occupy tetrapaks from under juice, milk and kefir. In order to make a pot, long liter boxes are cut out one of the sides, and in short half-liter – the upper part. Boxes are thoroughly washed and dried, after which they perforate the bottom and fall asleep the earth. The advantages of tetrapaks include the simplicity of plant extraction when landed in the ground and the lack of cash costs. In addition, such a container does not risks and does not come into disrepair from regular watering of plants. The disadvantages include the impossibility of reuse of boxes and not too aesthetic appearance.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Another budget version of the seaside pots is polyethylene. For this take small sachets, they are done in their lower part a pair of holes and fill the earth. The disadvantage of this species is the possibility of the appearance of mold and some formlessness of Tara. Also to categories of homemade pots can be attributed to the cropped plastic bottles and cups that can serve not one season.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

An interesting option is the cardboard sleeves from toilet paper. They are simply placed on the overall pallet, fill the earth and perform the landing of seeds. Such “pots” are used for plants in need of picking, as well as for shoots with a small root system. By the way, it is possible to plant sprouts into the ground with a sleeve: a soft cardboard is very quickly sisted in the ground and overtakes.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Also as a container under seedlings use aluminum cans from under beverages. For this, they cut off the bottom, then turn over, rushing the tongue as much as possible to the previous place, and pour eggshell or clamzit on the bottom. Next of the gauze make small bags, fill their earth and put in banks. Grown shoots take out of the cans along with gauze bags and transplanted into the ground.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Next interesting option – Pots from egg shell. This method of cultivation is convenient because the shoots do not need to get from the “pot” when landing, and you only need to crush the shell by hand, trying not to damage the roots. During the germination period, seeds of the shell are placed in a cell for eggs, and drainage holes are done in the shell using a needle.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

And another one-time version of Tara are pots of newsprint. In order to make them, take a 200-gram glass jar, turn it on three or four layers of newsprint and leave at the bottom of the battery for the bottom. The edges of the newspaper are bonded by a stapler, and the allowances left at the bottom wock, forming the bottom. Then the pot exhibit on the plastic pallet and fill the earth. Watering the plants in such a container should be very careful, so that the water drops do not hit the paper, but to plant – right in the pots.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Forms

Empty containers of factory production are produced in a round or square design. Round models are good because before the transplantation in the ground of them is much easier to remove the plant, but they occupy a lot of space on the windowsill. Square products on the contrary – very compact are located on the window, but to pull out the escape from them is much more difficult.

Also on sale there are blocks of round or square pots, the so-called cassettes. Each container is separated from adjacent inner partitions that do not allow the roots of adjacent plants. Blocks are intended only for crops with a basic root system, and for shoots having a rod type of root, not used. This is due to the fact that the depth of cassette pots usually does not exceed 5 cm.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Dimensions

The seaside pots are produced in a large range of sizes, which greatly facilitates the choice of the necessary models. So, for plants in need of picking, 500 ml pots are suitable. For medium-sized cultures that are not needed, models can be used by 150-200 ml, and for growing dimensional plants, pots are used with a volume of from 700 ml to 1 liter. In the conditions of gardeners for growing fruit trees seedlings use volumetric 15-liter pots, which also apply to the formation of mobile flower. And, for example, cucumbers will quite suit a pot of 7 cm high and 10 cm wide, for tomatoes height should be 12 cm with a width of 17 cm, and peppers and eggplants will need a capacity from 10 to 15 cm in height and the same in width.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

How to choose?

When choosing pots for seedlings are usually guided by personal preferences, but a number of general criteria should be taken into account yet. So, if it is decided to plant seeds in peat pots, then you do not need to buy all the necessary amounts of containers. It is better to purchase one copy and try it at home on “Profitability”. To do this, the cup is poured with warm water and put a pot there. A day later, it is usually visible, what is the percentage of cardboard to taper. If the pressed paper is no more than a third, and it also softens in water well, and does not swim with a monolithic piece, then the quality of the pots are most likely good, and you can buy a planned number. On plastic pots, it is usually no questions: the products are made of safe raw materials and the necessary technical and sanitary control is undergoing.

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Pots for seedling: species and tips for choosing

Review of pots for seedlings See next video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment