Anti-Rubber Mattress

Many think what the feature of the anti-face mattress is different from all others. However, when choosing, you need to think about what kind of sample you need: children’s, orthopedic or other.

What it is?

Care for lying patients – it’s not about simple. Many patients suffer overweight, which makes care for them even more difficult, because alone flutter man does not work. As a rule, people chained to beds very soon begin to suffer from new ailment – proleells.

Prolesiders are formed as a result of tissue necrosis. Such wounds on the body deliver an unbearable pain without a suffering. It was so it turned out that it is easier to resort to the prevention of barefacifices than to their treatment, especially since it is often possible only by surgery. There is a fire mattress to the rescue.

Anti-Register Complexes are to date the best preventive tool, allowing in the long run to avoid education laying out in general.

They are suitable for improving the state of people who already suffer from such an unpleasant illness. Anti-Rubber systems provide a massage effect that stimulates blood circulation not only in the skin, but also in deep tissues.

Different types of systems can be selected for different patients: fully chained to bed, with the preservation of partial mobility, during the injuries of the spine and bone marrow. Anti-Rubber models are made not only for beds, but also for sofas and even chairs.

Before selecting the system of interest, it is necessary to consult with the attending physician. Incorrectly selected anti-cluster mattress can worsen the patient’s position.

Views and Description

There are many varieties of anti-Rubber mattresses. First of all, they are divided into static and dynamic.

  • Static mattress more like ordinary orthopedic, as it allows you to tightly fix the position of the patient’s body. Such samples are suitable only for people with preserved mobility, as well as for rehabilitation during spinal injuries. Note that if the bone marrow is damaged, you can only use a static mattress without compressor.

  • Dynamic models Made in two variations. The twist option is suitable for those who have a partial mobility. There are significant limitations imposed on health indicators. First, the patient should not weigh more than 120 kg. Secondly, if there are already beds, their severity should not exceed 2 degrees.
    1. The twist version is a construct made from a variety of aircases. They are often placed in checker.
    2. Tubular mattress suitable for fat people and for those who are completely devoid of mobility. The degree of layers can be the highest – the fourth.

  • Balone mattress Creately design with a hole for the vessel to facilitate the work of the career and ensure the demolition level of hygiene.

Each of the listed options can be equipped with laser perforation, which provides a sleeping place with sufficient ventilation. There are mattresses with blowing: they additionally cool the body of the patient.

Such specimens are most suitable for people who suffer in high sweating.

Classic dynamic systems are equipped with compressors. More expensive models come complete with a control unit placed on the side of the patient.

  • The control unit allows you to switch the modes of the mattress.
  • The compressor can work from the mains and work as a standalone construct.
  • Network models are equipped with special short-circuit protective fuses, and autonomous do not need additional feed. They are an order of magnitude more expensive.

Separately highlight a children’s mattress, which differs from an adult similar model only in size and coating. It should be hypoallergenic and soft, the use of natural tissues is welcomed.

Soft silicone models are suitable for operating table. For long-term operation, they will not fit, but the patient will be more comfortable on such a substrate.


In this section, filling static models will be considered, since for dynamic filler systems is air injected inside the compressor.

Multiple materials are used as fillers for static mattresses: polyvinyl chloride, foam rubber (polyurethane foam) and gel.

  • Polyvinyl chloride Cheap, however, it has one important disadvantage. Polyvinyl chloride mattresses are practically not ventilated, as a result of which the underlying patient sweats. However, systems from polyvinyl chloride is easy to wash, they will quickly dry, do not absorb unpleasant odors.
  • Polyurethane (foam) mattress ventilate much better than its cheap analog. It is also very well cleaned and does not absorb foreign odors, but such models can not be washed with simple water. It is advisable at all without watering the base and clean the cleaning with a slightly wet napkin.

  • Polyuretnye The mattress for the functional bed is suitable for lying large with spinal injuries. Be sure to choose the most soft models, allowing you to drown the body inside them. Buttocks, blades and other protruding parts will be recessed inside the mattress, and the lower back will provide sufficient support.
  • Gel Mattresses are an intermediate option between static models and dynamic. Due to the oscillation of the gel inside the body massage, not only from left to right, but also from the bottom up. Such models are not suitable for people with already existing breakdowns, as well as for those who are constantly chained to bed. Gel mattresses -Hellic alternative to more than combat complexes.

Pros, cons and contraindications

Pluses of using anti-face mattresses There are a huge set. The first and most important of them are prevention of laying out and improving the condition of patients already suffering. Massage created by anti-cluster systems stimulates fabrics, not allowing blood stagnation in them.

The system against the bedrooms is placed directly on the main mattress.

It is important to be guided by the choice rules that are quite simple.

  • Anti-Role Design should not be greater than or less main. It is necessary to select a model, exactly the corresponding sizes.
  • Systems usually equip almost silent compressors, but pay attention to the noise that they produce, do not exceed 10 dB.

Thus, the simplicity of choice is another substantial plus.

Required conditions – consultation with the attending physician, as well as familiarization with the list of contraindications.

By cons, it is possible to classify the impossibility of using the Anti-Rubber Sample as an alternative to ordinary. In the case of dynamic systems, they are placed on the usual orthopedic mattress, which is also a plus, and a minus.

Not every anti-terrestrial kit can be used in cases if the patient has injured the musculoskeletal system. The fracture of the neck of the hip, the strong injury of the spine (especially the one that touched the brain touched) require hard fixation of the body without any massage effect: it will only lead to a deterioration.

Choosing a mattress for oncoboles, it is best to stay on the scholar systems. As a rule, such patients are not completely devoid of mobility and often suffer from dystrophy. Massage will help them improve well-being. It is important to pay attention to the fact that the compressor does not noise, as the dynamic systems are not disconnected during sleep. Oncoboles sleep quite sensitively, the compressor should not interfere.


The length and in particular the width of anti-clustered mattresses varies significantly, however, these parameters usually correspond to the typical parameters of ordinary mattresses.

The most common mattress for small single beds with a size of 800 x 1900 mm, since people suffering from immobility are rarely placed on double bulwishes.

There are mattresses width 70, 80 cm. Seventiethisantimeter designs are designed to a greater extent for children than for adults, because few people feel free on a 70-centimeter lament. In length, such mattresses usually make either 190 cm or 200 cm. This parameter depends on the dimensions of the main mattress or bed.

Pay attention to the correlation of the bed and the anti-cluster mattress. If you choose a too big model that will hang on the sides, it is fraught with some difficulties, especially if the patient suffers from excess weight.

The beggars will not allow air to circulate inside the mattress, as a result of which the compressor is constantly overloaded and may break. In addition, the pressure in such a canvase is unevenly distributed, so the anti-terethe effect is reduced to zero.

With too small systems the situation is different. The convenience of the patient should be in the first place, and laying a bed on a mattress that does not correspond to dimensions can deliver substantial discomfort.

Another cornerstone is that small systems slide, and they cannot be fixed with pins or other sharp objects – there is a chance to pierce the cavity.

How much does it weigh?

The weight of the mattress directly depends on the selected model. So, twenty structures can weigh in 3 kilograms, tubular – up to 5. Static mattresses weigh much more, mostly their mass is the same as the ordinary orthopedic models.

Its mass has a compressor. As a rule, it is he who is the hardest, and you need to thoroughly think about how to locate it well.

Ordinary hooks on the walls may not stand it, so many people resort to what reception: hang compressor right from the side of the bed. This location of this massive object is very convenient, since a partially mobile patient can independently switch the air supply modes, if the mattress is equipped with.

It is also important to think about the weight of the patient. The more complete patient, the more improved (and, therefore, heavy) it will be needed by the mattress. Tubular models must be equipped with additional perforation and blowing. Each of these options adds to the weight of the mattress, and to its value.

And static, and dynamic models differ in different principles of work. If static models can simply be installed and immediately, without prior preparation, put the patient, then dynamic options require a more serious approach.

Principle of operation

Static mattresses are not much different on the principle of operation from orthopedic models, but they have a different structure, supporting the entire body at once and does not allow any individual points to receive all the impact.

In dynamic systems, the air is served alternately in one, then in other cameras. Usually cameras are filled in checker. The cycle of changing the filled cells or cylinders does not exceed 10 minutes, and such a quick change does not allow the blood stagnation in the skin tissues. In addition, the change of cells allows massaging muscles and internal organs, improving the overall condition of the patient.

The compressor can be connected to the power grid, and such models are in great demand than autonomous. The need to place the compressor near the outlet imposes certain restrictions on the placement of the bed itself with the mattress. The pipes of the compressor should be located in the legs, and it is impossible to allow their intersection and interlacing. Compressor through the tube delivers air to the mattress.

Gel complexes do not need to be connected from the power grid, they move by themselves under the body of a lying patient. In this case, the massage effect is not so pronounced, but it does not mean that it is worse. On gel mattresses there is a complete relaxation of the whole body. In some cases, they can be used for a healthy person who just wants to achieve a massage effect during sleep.

How to use: instructions for use

Each specific model has its own operating conditions, however There is a set of basic characteristics that are inherent in all dynamic mattresses.

  • It is impossible to inflate the mattress after putting a patient on him. This is due to the fact that the compressor is much easier to cope with the inflammation of the design without load, and in the future just maintain the required level of pressure.
  • You can not fix the anti-face mattress, as well as sheets on it, with a pin.
  • All tubes and compressor should be placed in the legs of bed. Pay attention to the tubes not intertwined and have not been placed under the mattress.

  • On top of the anti-religion mattress, it is customary to get absorbing diapers. They serve as a tolerable replacement department for the vessel, but not enough. In addition, on the one hand, hygroscopic diapers have a fully sealed coating, which contributes to the occurrence of the greenhouse effect. It is imperative to immediately buy a mattress given the fact that the patient is out.
  • Adjusting the pressure level, use a simple test. After the mattress comes and the patient is laid, try to push the finger between the anti-face mattress and the ordinary mattress. If the finger passes too easy, it means that the cells are pouring tightly and you need to blow a little mattress. In case the finger practically does not pass, it is necessary to increase the pressure in the mattress.

Rating manufacturers

Today, models from Europe are the biggest confidence.

  • In great honor –German Anti-Rubber Mattresses. Firms such as Titan Deutschland GmbH, Belberg and others have proven themselves in the market. Their samples are distinguished by excellent quality and democratic price, while the range is constantly updated.
  • China and Taiwan offer quite decent samples, but do not buy complicated models from these manufacturers. It is best to resort to buying Chinese mattresses, if an option is needed for a short time, for example, for half-year rehabilitation after injury. Unfortunately, the warranty period that China offers is quite small – only 1 year. After the end of the warranty service, the mattresses fail as practice shows.

  • Buy Polish mattress – It is practically the same as buying German. In quality they are almost equivalent to each other. The main difference lies in the price tag for the product: Poland supplies mattresses more expensive, but in some cases they are equipped with rare additional options, such as a special coating. The most famous is the Armed brand, which has been in the medical goods market for several decades.
  • Manufacturers from Russia Also deliver high quality products, however, the price tag remains an order of magnitude higher than that of other representatives. This is due to the fact that Russian models are maximally equipped in order to guarantee comfort to a lying patient. They are performed from durable materials, and the mattresses themselves offer a long warranty.


Many buyers share their experience about buying anti-cluster mattresses. Most acquire such structures for lying relatives, and the reason is simple: care for immobilized patients is extremely complex. Almost all feedback speaks in favor of buying a Anti-Rubber Mattress for several reasons.

  1. First, about the lying patient is not easy to take care of the fact that it needs to be turned over no less than every 1-2 hours. With anti-face mattresses, everything becomes much easier: now a person is required to turn over 3-4 days. It greatly facilitates the work of the one who cares.
  2. Another difference in specialized complexes that anti-clustered mattresses are equipped with leg deepening and ship branch. Many buyers noted that the presence of such options has eased life even more, and the patient began to feel much more comfortable.
  3. Another thing that was marked by people is that the mattresses against the beds are guaranteed massage effect, thus partially preventing full muscle atrophy. As a result, pain in the patient’s body becomes not so pronounced, and his suffering decreases.

In general, it is recommended to buy a similar mattress, but it is necessary to pay attention to the fact that the compressor does not noise: it is impossible to turn off the product for the night, and it is important to take care so that he does not interfere with the patient to sleep.

What better to choose?

The choice of a particular model depends entirely on the necessary effect to achieve. If the person is immobilized not completely and kept at least a partial ability to move, the best choice will be a twist sample. It is not necessary to choose a complex design, it can be limited to 1-2 air supply modes.

In the presence of strong bedside down, with a large weight or complete immobility, it is better to give preference to the balloral mattresses. They better cope with a function of massage a tissue under high body tissue.

A priori should look for such a mattress that guarantees good ventilation. It is important to pay attention to the filler and for the presence of perforation.

If the patient suffers with increased sweating, and also fat, it is best to find a model with an additional blowing. It will make a person stay in bed comfortable.

With serious injuries, the spine should not choose a dynamic mattress, you need to stop only on static. During recovery, a complete fixation of the patient is important, however, it can be quickly quickly. So that this does not happen, the body pressure on the surface should be distributed evenly without a special pressure on certain sections.

How to fool out?

The anti-face mattress blown away slowly, be prepared for this. Many complain that when independent attempts to blow his air distilled from one cell to another, and it is not completely “expelled” from the canvase.

However, there isSeveral tricks that make this procedure as comfortable as possible.

  • First you need to disconnect the compressor from the network or turn off the autonomous sample power. When the compressor is running, the mattress will not work out.
  • Next, disconnect the compressor along with the mattress tubes. Do not remove the mattress from the bed.
  • Gradually start smooth out the mattress by hand. Do not rush and do not press too much. Gradually the air will completely come out.
  • When the cells are almost blown away, you can gradually turn the mattress in the tight harness from the head of the legs to the legs. Thus, you finally get rid of the air in the cavities, in parallel with this, without allowing it to “wrap up” inside the mattress from the cell in the cell.
  • Store mattress need folded.

As you can see, to blow the anti-clustered mattress, there is nothing complicated, it is only important to be patient and follow the instructions given.

Do not knock on it or try to “expel” air, Topchak complex, it will not help.

How to care for the anti-cluster mattress?

For different types of mattresses, the rules of cleaning are distinguished, however Some standard recommendations can still be brought.

  • To clean the mattresses you can not use abrasive substances or materials, such as hard sponges or iron brushes. All this can damage the protective layer of model coating.
  • Clean the mattress only in inflated condition. Take care that the sample is enough to be enough – it will greatly facilitate the cleaning process.
  • After the master cleaning, the mattress needs to be dried in a room, protected from exposure to sunlight. Subject to the mattress direct exposure to the sun can not.
  • Mattresses can not be stroke even in detour. If you need to decapitate them, rice and special antiseptic sprays are used.
  • Store Anti-Rubber sets in the drop down.

To make care as simple as possible, it is recommended to carry out regular preventive cleaning once a week.

More information about mattresses from bedside, you will learn from the following video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: