Why the tv does not see the prefix digital television and how to fix it?

Due to the mass transition to digital television broadcasting for most TVs it was required to purchase additional equipment – a special console. Connect it through the tulips is quite simple. But in some cases the TV does not see the prefix, because of any channel does not show. Reasons for the appearance of such a problem may be several.

Why the tv does not see the prefix digital television and how to fix it?

Causes

The most common reason is the wrong connection.

The fact is that some users are trying to connect through an antenna cable. But this method is relevant only for very old models of TVs.

Why the tv does not see the prefix digital television and how to fix it?

And there are several other common reasons.

  1. Attempts to connect a digital prefix through the so-called tulips to RSA-output.
  2. Connecting the console in inactive condition. If it does not burn the green light indicator on it – this means that the device is turned off.
  3. Incorrectly selected cables or antenna.

In addition, the TV may not see the prefix, due to the malfunction of equipment or household appliances.

Why the tv does not see the prefix digital television and how to fix it?

Why the tv does not see the prefix digital television and how to fix it?

What to do?

If the problem is relevant, then first it is necessary to make sure that the prefix is ​​enabled. The green indicator on the panel does not burn, it means that you need to take the remote control and click on it the corresponding round button on / off the device.

If the device is actively, then the problem is solved in another way depending on its nature. It happens that initially the prefix was connected, which is called, “in the old manner”, through the cable – and it is incorrect. If the connection is performed on the TV of the old model, then you will need to buy additional equipment (tuner with the appropriate input and output). Next, the cable runs directly from the antenna must be connected to the output with the name INPUT (IN). The cable designed to serve the signal to the TV must be connected to the connector designated as OUTPUT (OUT).

Why the tv does not see the prefix digital television and how to fix it?

The modern AV module is already mounted in modern models, so it is simply impossible to connect the prefix to them.

Owners of modern equipment equipped with HDMI connectors, you need to purchase an appropriate cable. Through it will be a simple and fast connection.

In any case, the connection is important to remember one general rule: Those cables that are on the console are connected to the OUTPUT connector, and those that on the TV panel – to the nests with the INPUT designation.

Why the tv does not see the prefix digital television and how to fix it?

When When the TV does not see the console even after all the manipulations carried out, you need to check the health of the equipment itself. The console of digital television can be tested only on another TV. It will be useful to check for the service and the TV itself. The technique may be in working condition, but the connectors and inputs will be broken.

Why the tv does not see the prefix digital television and how to fix it?

Useful advice

When there is confidence that all the necessary equipment is ready and is in good condition, you can include a console. Experts recommend to do it in a few simple steps.

  1. Connect an antenna to the socket called RF IN. Antenna can be indoor or generalical – it does not matter.
  2. Using RCA cables or, as they are called, tulips connect the console to the TV (watch matching the outputs in colors). But if the TV is modern, it is advisable to use the HDMI cable.
  3. Turn on the TV itself and activate the console. The appropriate color indicator should turn around on the device.

Why the tv does not see the prefix digital television and how to fix it?

Why the tv does not see the prefix digital television and how to fix it?

But in order to enjoy the high-quality image and good sound, these actions will not be enough.

You need to configure the console, using the advice of specialists.

  1. Using the console from the console, you must call the setting item through the menu. The corresponding window should be displayed on the TV screen.
  2. Next you need to configure the channels. Here you can choose a manual search or automatic. Experts recommend to stay in the second version (easier and fast).
  3. As soon as the search is completed, you can enjoy all available channels.

Connect and establish a digital television console easy. The main thing is to make sure the working condition of the technique and have the necessary cables in stock.

Why the tv does not see the prefix digital television and how to fix it?

What if there is no signal on the console to the TV, look next.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment