How to print photos on the printer?

Print photo – easy business. You only need to have the necessary equipment and suitable paper at hand, as well as know the basic rules. Specialists advise colored inkjet printers for such purposes. However, if the quality of paper images is not for you a very important point, you can print photos and on a conventional laser model. Consider the nuances of creating photos of a different size in more detail.

How to print photo 10×15?

First of all, it is worth determining where the images will be taken from. Direct connection of the camera to the printer is possible when using PictBridge technology. You can also print from a flash drive or a memory card inserted into the computer.

In addition, you must purchase a photo paper of the desired size and type. When choosing the latter, it is worth considering the recommendations of the equipment manufacturer. To print on the printer Photo 10×15, look for paper, on the packaging of which will be the same numbers.

Also sometimes sizes are indicated in inches – 4×6.

The process itself is quite simple:

  1. If printing is conducted with a PC, find the photo on it to be transferred to paper;
  2. Clicking on the image right-click, select “Print”;
  3. In the window that opens, specify the printer model;
  4. Select the paper size (10×15 or A6) and its type;
  5. Decide how the image will be located on the page, think if you need fields;
  6. Specify how many copies you want to get;
  7. Confirm the specified parameters and wait for the process.

How to print other photos?

The process of printing photos of other sizes in most cases does not cause difficulties.

3×4

Before printing an image of this size, prepare it. Typically, there are photos for documents. Therefore, you can use the corresponding graphic editor. The printing process is practically no different from the above described above. The only difference is how the image will be located on paper. Usually, several small photos are located on one large sheet.

Do not forget about the preview. This will allow you to make sure that you did everything right.

On several sheets A4

Sometimes the image has such a large size that one sheet A4 is missing (for example, a poster). If desired, it is possible to print out the photo wallpaper, although it is usually used for such purposes professional large-sized equipment.

In this case, you should click on the image by opening the print window. Then you need to select equipment, size and paper type. In the tab “Layout”, put a tick opposite the word “multi-page”. After that, you need to select “Poster Print”, set the desired parameters and start the process.

It is important to remember that only images in high resolution are suitable for such purposes. Otherwise the final quality may disappear.

You can also pre-use the service that makes not only photo editing, but also its separation on equal parts (Proposter).

Recommendations

In conclusion, you should give a few tips, Which will help you make beautiful and high-quality photos from electronic versions.

  • Choosing between matte and glossy paper, Consider where the photo will be stored. If it is lying in the album under the film or stand in the frame under glass, the matte version is preferable.
  • Regardless of the size of the image before the seal carefully inspect it. Perhaps you need to adjust the brightness and contrast, add suits to shades, remove some defects (for example, red eyes). Some modern printers have automatic adjustment options. If the equipment is not equipped with such a supplement, you can use graphic editors (Paint. NET, Photoshop and T.D.).
  • Remember that on paper the image may not be so bright as on the monitor. If you are going to print a few photos right away, first make one trial frame to check the degree of match.
  • Specialists say it is better to save images in TIFF format, not JPEG. This allows you to preserve the quality of photos when printing.
  • Pay great attention to permission. If you want to get high-quality images, this parameter should not be less than 300 dpi.
  • Do not rush to insert an image into an album or frame immediately after the paper output from the printer. Leave a photo in the air for about half an hour so that the paint is finally dried.
  • If you want to print photos from the Internet, It is worth it first to download it on the PC, and then act according to the scheme described above. You can also use another method. In this case, you need to copy the image, insert it into a text editor, and then open and send to print.
  • To print photos from the phone, You need to install a special mobile application, for example, DROPBOX. At the same time you need to create an account on PC. Then you should simply mark the photo in the phone that needed a printout. They will appear on the computer, from where it will be possible to run the process.
  • If the printer has a cloud print ready sticker, You can attract any “cloud” service to print. It only needs to register. If the equipment does not support such a function, you will have to use a PC to connect the printer to Google Account. The “Virtual Printer” service will allow you to print files through the “cloud” from any devices.

How to print a photo on the printer, look next.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: