Features of laser color MFP

The most necessary office equipment has been connected to the MFP, which is used at home and in office conditions. Such an aggregate may include from two, three or more devices. Of course, preference is given to models uniting printer, scanner, copier and fax. The advantages of the multifunctional device are obvious, but you should choose the most suitable for certain tasks. Today there is a huge number of laser non-ferrous MFPs, among which there are very successful and economical options.

Features of laser color MFP

Main characteristics

Laser MFP, which allows you to print color images, includes the scanner functions, copying machine and printer. Several less often to add to them and fax. The printer in such a technique is almost similar to a separate device. If there is differences, then only in the design. It is necessary to more conveniently place the printer in the inner space of the case.

Usually, powder is used to refill cartridges, which is also called toner, or liquid ink.

In color models, there are four cartridges: one black and three multicolored. Due to the mixing of colors (last three) and various shades are created.

Most often there is a printer module in the farthest part of the case. When opening the front cover, the MFP will be visible rollers, inkwell, photored. The principle of operation of this module is fully the same as in the usual printer.

Features of laser color MFP

Features of laser color MFP

Features of laser color MFP

The scanner module operating circuit also fully corresponds to a separate scanning device. First, the backlight of the source image on the document is performed. Next, using the mirrors, the signal is transmitted to the CCD matrix. It is here that the process of converting a picture in a set of bytes, which understands the computer.

Most models The scanner takes up the top location. For convenience, the module covers a folding lid. Most often there are standard sizes scanners, calculated under the A4 sheet.

Copy function is performed by a printer and scanner. The scanner enters the image that after converting the raster is transmitted to the printer. Then the resulting picture is printed. The computer in this process does not participate at all.

Features of laser color MFP

All copying occurs by pressing the button and takes countdown. The speed of the procedure is almost completely dependent on the printer’s print speed.

It is worth noting that colored MFPs allow you to print not only documents, but also photos, various pictures and other images. In some devices, in addition to ordinary, also photographic photographs are built.

The latter allow you to print images that are externally similar to those performed in professional photo studio.

Due to the built-in facsimile, you can send and receive messages. The operation of this module occurs by connecting to the telephone lines. Fax actually transforms the power to the image, and then transfers it to paper.

Features of laser color MFP

Features of laser color MFP

Advantages and disadvantages

Among the main advantages of the multifunctional device should be highlighted paramount Practicality, small size and at the same time a moderate price. By purchasing all the devices whose functions are laid in MFPs, it is necessary to overpay by 2-3 times.

In this case, the combination of the printer and the scanner allows you to copy documents and images very quickly and without the use of a computer.

Laser devices are characterized by higher print speed. This is due to the ability of the laser beam to move with a greater speed compared to the print head with numerous nozzles. In addition, rays have more accuracy, which increases permission.

Features of laser color MFP

Another advantage of laser technology is economy. As a rule, toner cartridges allow thousands of pages. As a result, there is no need for their frequent replacement or refueling.

It should be remembered that the laser printing is more resistant compared to the inkjet. This is characteristic even for conditions with high humidity.

In the case of the teer of toner, it is enough to shake the cartridge. It does not have to wash anything or replace.

Features of laser color MFP

However, with many advantages of the laser MFP, you should not forget about it Disadvantages. So, when working Devices allocated a number of not too useful substances, Including acetone, ozone, nitrogen oxides, as well as paper dust. At the same time do not forget about ultraviolet and infrared radiation. It is worth understanding that in the process of paper heating There is a constant evaporation of water vapor and formaldehyde.

MFU design Consumes a lot of energy, Since it includes a thermoelement and a high-voltage power supply.

The device cannot be connected to uninterruptible power sources that have a small or medium power.

Ready color images, for example, photos are obtained less high quality than when printing on an inkjet printer. At the same time, the laser technique needs more high-quality paper. So, the use of upholstered paper or with a clip can lead to serious breakdowns. Full-color imprint does not repeat steadily as the source. This is due to the fact that there is no ability to control electrostatic fields.

Most non-ferrous MFPs leave hidden labels on print. Usually they indicate the date and time when it was stamped. The serial number of the aggregate is added to these parameters. As a rule, this is done to stop fake printing of various securities, including cash bills.

Another disadvantage is more High cost laser device compared to inkjet. In this case, the set of cartridges for color MFP will cost as a new inkjet printer.

Features of laser color MFP

Review of species

Depending on the various MFP parameters, there may be different types. For example, the print format distinguishes the following types:

  • A0 with sheet size 841 by 1189 mm;

  • A1 – 594 by 841 mm;

  • A2 – 420 by 594 mm;

  • A3 – 297 by 420 mm;

  • A4 – 210 by 297 mm;

  • A5 – 148 at 210 mm;

  • A6 – 105 by 148 mm;

  • A7 – 74 by 105 mm.

Features of laser color MFP

Features of laser color MFP

Features of laser color MFP

In fact, every next sheet format is divided into two equal halves Previous. The minimum is the format A10, corresponding to sizes 26 by 37 mm. However, the most popular are A4 and A3. Sometimes there are printers that are used for paper formats with letters in and with. They are intended to receive printing publications and envelopes.

Prints are distinguished by single and double-sided devices.

It is worth noting that the two-sided printing is very convenient, as it simplifies the process and reduces its time. This is especially important for devices in the office, where the speed of printing is valued.

However, it should be noted that the cost of MFP with the function of bilateral printing is significantly higher.

By the one where the device is located, there are two types.

  • Outdoor Different with high performance. Basically designed for paper carriers A3 and more.

  • Desktop In most cases, houses are used. As a rule, such a device is compact, it is easy to place next to the computer right.

Features of laser color MFP

Features of laser color MFP

For convenient use and savings, it is best to use MFP with PPC or SRSH.

  • PZK, or re-controlled cartridges, can be external or internal. It is worth noting that they are easy to refill with a syringe directly in the device itself. Proper operation allows you to produce up to 1,000 refueling cartridge with self-reducing chips. Almost for all MFFI models there are branded PZK.

  • SSR, or the system that carries out continuous ink supply is usually placed not inside the device, but outside. In the print head, the paint is supplied by a loop, which is based on silicone tubes. At the same time, refueling can be made independently, but only as ink is spent. Best of all showed cartridge systems produced at the factories. This option should be selected for large print volumes.

Devices with recycled interchangeable blocks or SNRs allow you to save on the prints of each sheet at 17-20 times. This is due to cheaper ink than in original cartridges, with the same compatibility.

Features of laser color MFP

Features of laser color MFP

By type of printing, the device under consideration in the article is divided into multicolored and black and white.

  1. The first form assumes the presence of replaceable blocks of several colors. As a rule, the main one is considered a palette of blue, purple, yellow and black. However, there are models in which additional shades are used, for example: blue, red, orange, green or shades of black. Thus, the color palette is expanding, and the device becomes more expensive. Most often, printers for 10 or more colors are needed for professional use.

  2. Black and White Option uses one color ink – black. Usually such models are used to print documents.

Features of laser color MFP

Features of laser color MFP

On printing technology printers all MFP are also classified.

  • Laser differ in high speed. In this case, such a printer is economical, since the cost of one sheet is ready is quite low, which is due to the cheap consumables. One toner cartridge refueling allows you to make a lot of printouts. Another obvious dignity is that printouts Resistant to moisture and rays of the sun.

Equally well suited for use in office and home environment.

However, this type has certain disadvantages, for example Air pollution with small toner particles and ozone, which highlights the device when printing. It requires ventilating premises for large printout volumes. Cartridge refill is made exclusively in service centers. It should also be considered that such a device and a new cartridge for it It is quite expensive.

Features of laser color MFP

  • LED devices have a small size, if you compare them with laser. The lack of moving parts in the LED block increases the life of the printer. Creating a “white noise” by a laser signal jerseats Information security.

Used at home and in offices to print ordinary and confidential documents.

From disadvantages it should be noted more Low print speed, as well as No adjustment of individual diodes with different brightness of the glow. In case the diode fails, a replacement of the entire LED strip is necessary.

Features of laser color MFP

  • Inkjet printers are best suited for printing color photos, posters, leaflets, booklets. If with such a device to use SRSH, then it is possible to significantly reduce the cost of full-color printing. However, the printout on such a device is conducted with low speed. Cartridges are quite expensive, and with a long-term printer without work it is possible to dry ink. In this case, it is necessary to clean the print head or repair the printer itself.

Features of laser color MFP

  • Sublimation printers allow for the resulting durable images as a material to use fabrics, ceramics, glass, metal. Most often there are filled cartridges in blue, red and yellow colors. As a result of the use of such a device, high-quality and homogeneous photographs are obtained, without visible rasters. Benefits should also be attributed Small sizes of such a device.

However, you should be prepared that the print speed will be quite low, and the cost of MFP and consumables are high.

Features of laser color MFP

The best multifunction device does not necessarily have expensive. There are practical devices with cheap consumables that can be served for a long time. Of course, showing certain advantages of the model can only compare.

Among popular MFP options are known Canon i-Sensys MF641CW, which combines good opportunities with an acceptable cost. The device includes a scanner with a resolution of 600 × 600 DPI and improved mode. Allows you to make a black and color printing of the same quality at a speed of 18 sheets in 60 seconds.

This model is great for home and office work.

Among the advantages of the device should be noted Ability to print on a printer without wires, the function of sending copies of documents immediately after scanning, as well as the ability to connect the camera. The device is easy to manage by display. In this case, its cost begins from $ 255.

Features of laser color MFP

Features of laser color MFP

Features of laser color MFP

Another popular inexpensive MFP – HP Color LaserJet Pro M281FDW. Among its advantages, users say high-quality printing, wireless connectivity, convenient paper feed. Easy control is carried out using a sensory liquid crystal display. Per minute the device is capable of printing 21 page.

It is worth noting the automatic feeding of originals for scanning, which allows you to significantly save time.

For the cost of $ 360, users receive a high-quality device 3 in 1 with built-in double-sided seal. Disturbing work with this unit can only Little Cartridge Capacity and Periodic Driver Failures.

Features of laser color MFP

Features of laser color MFP

Features of laser color MFP

For home, as well as small offices will be an excellent option Kyocera Ecosys M5521. The main difference of the device is the ability to withdraw 65,000 pages per month. At the same time, good print quality is withstanding with a resolution of 1200 × 1200 points. Per minute the device can print and copy more than 20 pages. Scanner with built-in capacity for originals has a resolution of 600 × 600 DPI.

The MFP also has a built-in fax and there is a print function with SD cards.

It is worth noting that the device does not have the ability to connect Wi-Fi.

The cost of this model begins from $ 270.

Features of laser color MFP

Features of laser color MFP

Features of laser color MFP

How to choose?

When choosing a multifunction device, it should be clearly represented, for which it will be used. For example, for printing documents and text materials, it is not necessary to buy a color laser machine. It will be enough and black and white.

For home, when there may be long breaks in the work, it is best for the laser device.

It will be in order, even if you do not use it for 6 months and more.

Features of laser color MFP

Of course, for printing photo Laser colored MFP models suitable, but better quality can only be achieved using inkjet devices. If for home use or in the office you need to choose a device that should cope with large print volumes, then it is better to give preference to models with filled cartridges or SSRCH.

For the office, where you need to print large volumes in a short time, color laser MFP – the optimal option. It is important to consider the print format and the speed with which the documents will be processed. For example, for some types of work it is better to prefer a wide format version of the scanner or a copying device where there is a scaling function.

Multitasking may need MFP with fax, telephone or brochure.

Features of laser color MFP

Features of laser color MFP

Features of laser color MFP

If the scanner is important, then it should be taken into account that it may be on the principle of action Tablet or Stretch. Tablet models are most popular that scan documents with a movable carriage. It makes it easy to work even with a book format. But the extensive scanner copes only with separate sheets.

If you need to print promotional products or photos, it is important to choose Multicolor models. It is desirable that the printer is high-quality and worked not only with ordinary paper, but also with special photos, plastic, film and other materials.

Features of laser color MFP

Features of laser color MFP

In case of prevalence of simple tasks, choose from simple and inexpensive models. At the same time, it is important Pay attention to the cost of consumables.

Features of laser color MFP

The following is a video review of the Laser Colored MFP HP LaserJet M280NW.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment