Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

Mapei has exists for more than eighty years. Family enterprise began its activities from the production of paint products. After World War II, the demand for adhesive compositions and construction mixtures, which the firm began to produce, relying on their own know-how. In a short time, MAPEI increased momentum, introduced many unique developments into production, which gave her undeniable competitive advantages.

Using the construction chemistry of manufacturer MAPEI

Peculiarities

In Russia, MAPEI Corporation began its activities from the end of the nineties of the last century. Enterprises of the company operate in more than three dozen countries and have 68 factories around the world. The entire range of the company includes more than one and a half thousand positions, in Russia 40 most popular items are produced. Product features Mapei are that it has high quality. Building mixes are made using the development of company specialists, they are effective and environmentally safe, implemented in the average price segment.

The company’s policy is aimed at continuous improvement of product quality, while prices remain at the same level and are available to an ordinary buyer with a low income level.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

Varieties

There are many high-quality compounds manufactured by MAPEI, which allow you to solve a variety of tasks related to the construction.

  • “FUGA FRESCA” – It is paint that effectively restores the color of the seams between the tiles. It is made on the basis of aquatic emulsion and has the ability to create a homogeneous coating.
  • “MAPEI STABILCEM” – This is a special cement that has the qualities of a highly efficient plasticizer. Sacks in bags of 20 kg. He eliminates the porosity of concrete, strengthens concrete structures. When using “Stabilcem” there is no need to apply vibration to seal a concrete mix.
  • “MAPEI KERASEAL” Used to protect tiles from fading, pollution, moisture penetration. Used to process brick, natural stone, porcelain stoneware.
  • “MAPEI Planicrete” – Latex additive for cement mixtures. Gives good adhesion after applying, increases bending strength, significantly reduces moisture absorption coefficient.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

  • “Stabilcemt” One-component building mixture with minimal shrinkage. Designed for reliable fixation of vertical structures. The mixture does not contain chlorides. To prevent no extra deformation or shrinkage, you can use a special additive “Mapecure SRA”. This is an effective absorbent that “takes” excess water. It is categorically recommended to mix the mixture manually. It is applied in several ways: using a peel and spatula, using a special device by spray. Permissible thickness for one cycle – not more than 3.5 cm. The time interval between the application of different layers is 4-5 hours. If fittings are present in the paper, it must be processed by the primer. Often in this case use the special composition “MAPEFER 1K”. The average layer thickness – 2 mm.
  • “PROSFAS” It is used as primer and has different degrees of density, enhances the cement screed and acts as protection against dust and dirt.
  • “MAPEI FUGOLASTIC” – This is a highly efficient polymer additive to such compositions0 as “Keracolorff” and “Keracolorgg”. It increases the strength and coefficient of adhesion, reduces moisture absorption. Can “work” as filler of the seams between tiles, effectively changing the kel.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

  • “MAPEI MAPEFILL” – a filling mixture on a cement basis, which has the ability to especially quickly “grab”. Helps reliably fix vertical nodes. The largest size of the aggregate layer is 3 mm, the fill is allowed to 6 cm thick.
  • “Topcem Pronto” – this is an effective primer on cement basis. Average time of frozen – 4 days. With it, you can make high-quality ties, covering the linoleum floors, laying the tile and stone, mount porcelain stoneware.
  • “KERANET LIQUIDO” – Universal liquid solvent, which is possible for any surfaces. It is a highly efficient cleansing agent and removes lime, sealants, dried cement, adhesive compositions. Especially effective solvent when cleaning ceramic tiles and concrete.
  • Eporip Mapei – Special glue, which is designed to process concrete products. It is based on epoxy resin. You can effectively handle them a variety of seams and cracks in concrete. Hardens without shrinkage, does not contain toxins and solvents, has increased adhesion with steel and reinforced concrete structures.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

  • “Granirapid” – This is a two-component tile glue. Used for lining walls and floors.
  • “MAPEI GROUT HI-FLOW” – Special concrete composition that hardens for the minimum time. Made based on polymer fiber and ideal for processing reinforced concrete structures. Thickness allowable fill – up to 4 cm. Appropriately apply it to repair and restore old walls, floors, etc.
  • “Primer G” – this is dissolved in water synthetic resin, which is effective primer. Increases the adhesion coefficient, reliably protects porous surfaces from moisture penetration.
  • “Nivoplan Plus” Used as plaster in all types of rooms. Application thickness – no more than 2 cm. Effectively prepares the surface for mounting tiles, waterproofing, plaster, finish putty.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

  • “ULTRATOP LOFT” – coating that is intended for flooring. The composition is characterized by efficiency and ease of use. Most often used in rooms where large mechanical load on the floors. Material can be different and allowable to use it in the processing of walls.
  • “MAPEI ADESILEX P9” – Cement glue. Thickness allowable fill – up to 4 cm. Well showed itself when installing tiles, waterproofing, linoleum. Approximate consumption – 2 kg per 1 m2.
  • “MAPEI KERANET POLVERE” – Cleaner who can effectively handle walls indoors as well as facades. Easily copes with such substances as cement, lime, paint, petroleum products, sealants.
  • “Primer MF” It is used as primer and radically increases the coefficient of adhesion. It is based on epoxy resin and special additives. The composition is effective when working with porous reinforced concrete surfaces.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

  • “MAPEGROUT THIXOTROPIC” – This is a dry mixture, packaged in bags of 25 kg. Mixing with water, the composition forms a concrete substance, which is a monolith, does not resolve. Successfully can be used without formwork on both walls and ceiling.

Thixotropic has:

  • high strength reducing characteristics;
  • high adhesion coefficient;
  • resistance to temperature difference;
  • Waterproof.

Using the construction chemistry of manufacturer MAPEI

Often, this composition is used on objects that are subject to aggressive environmental impact. The composition is successfully used to repair floors in the premises. It is permissible to use it when repairing reinforced concrete tanks, including those that interact with drinking water.

Application

The use of MAPEI compositions depends on the task you want to perform. For example, mixtures that are made on the basis of epoxy resin with the addition of silicate sand and special additives, increase the stability of the processed material to the influence of moisture. Mapei epoxy grouts are considered one of the best in the world.

Repair work in the open air with the use of various MAPEI formulations is possible only without precipitation.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

When buying construction mixtures manufactured by MAPEI, it is recommended to see the quality certificates that all official dealers should be present. It is also recommended to read a memo instruction, where the purpose of this or that composition is always revealed.

It is also important before starting work well to prepare the processed area. Especially this postulate concerns concrete products – cracks in them are processed by a special tool with diamond nozzles or puncher. All crumbs and microparticles are removed using water pressure, then the area is thoroughly dried. In addition to water, compressed air is used to clean concrete.

Using the construction chemistry of manufacturer MAPEI

The surface is processed by a solvent, then the primer. Solvents must be concentrated to be able to delete:

  • paints;
  • fat;
  • cement and gypsum mixes;
  • Sealants.

The surface area with which the work takes place is moisturized, then excess water is removed with a vet or cloth. The recommended temperature in which operations can be carried out – from +6 to +36 degrees Celsius. At low ambient temperature (from + 10 ° C), the strength of plaster on the walls and bulk sex is slower.

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

Useful advice

When stored bags with mixtures should not be exposed to low temperatures. Recommended water temperature for dilution – from 25 to 42 degrees. At normal room temperature, the performance of the mixture and their technical characteristics are preserved at no more than an hour, so when they are prepared, this factor should be taken into account.

To properly make a concrete mix, the following recommendations should be followed, which users give reviews:

  • Open the desired number of bags with the calculation that they are used for one cycle;
  • gradually fall asleep the mixture into water, while stirred thoroughly with an electrician with a nozzle;

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

Using the construction chemistry of manufacturer MAPEI

  • The mixture should be homogeneous;
  • If the composition is too thick, then add some water.

In the next video you will find the laying of carpet tiles using MAPEI construction chemistry.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment