Types of skates for professional flooring and their installation

Among all the works performed when installing the roof, the installation of skates for a professional flooring occupies a special place. Despite the seeming simplicity, it requires accounting for many nuances determined by the view and sizes of the planned. Seals deserve and seal – without their application it is impossible to achieve an optimal level of insulation.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Description and appointment

First of all, it is worth noting that two completely different elements of the roof design can be called skates. The first is a junction formed by a pair of adjacent rods and at the highest point of the roof. The second element to which the presented material is dedicated is in good and looks like a plank for overlapping the compound mentioned above.

Usually, Sking lining produce from the same material as roofing. To achieve the best appearance, their shade must correspond to the tone of the profiled sheet, Ideally merge with him.

As for the procedure for installing skates, it is necessary for all roofing structures with the exception of flat.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Due to the fact that the prepared diverse closes the clearance between the skates, it performs 3 main functions.

  • Protective. Using roofing minimizes corrosion processes, wear rafter and damage the crate. The absence of overhead planks reduces the service life of the roof and reduces its thermal insulation qualities.
  • Ventilation. Upon completion of the installation between the skate and the roof, a small space is formed, providing air circulation. In addition, the presence of full ventilation prevents the formation of condensate – the main enemy of most insulation.
  • Decorative. Overhead planks close the lumen between the skates, providing the best visual effect. If the shade of the skate is selected correctly, it looks like an organic continuation of the roof.

The combination of the above qualities guarantees the trouble-free operation of the roof for 3-4 decades.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Views and sizes

As mentioned above, the roofing skates are most often made from the same material as the professional flooring. Such is galvanized steel, often covered with a polymer layer for better wear resistance. In most cases, skate linings are produced in the factory conditions, but some craftsmen prefer their manufacturers with their own hands – with the help of listogib.

Practice shows that the first option is not very expensive than the second, and therefore he does not use much popularity. For most planks, the average length of the section is 2-3 m, and in the case of a triangular species, this value can reach up to 6 m. Special attention deserved varieties of skates determined by the form of the product.

Traditional options 3 – corner, p-shaped and rounded.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Corner

The second name is triangular. Represent lining in the form of a reverse chute, the opening angle of which slightly exceeds the direct. So that the corner skates were stronger, their edges are subjected to rolling. Originality such products do not differ, and most importantly their advantage is a moderate price.

The size of the shelves of corner linings range from 140-145 mm to 190-200 mm. The first option is suitable for standard roofs, and the second is designed for the longest skates. As for the edge, its width varies in the range of 10-15 mm (this value is relevant for any variety of skates).

Types of skates for professional flooring and their installation

P-shaped

One of the most original solutions, from a designer point of view. Such skates, often refaned by rectangular, have a vertex in the form of the letter “P”, which performs the function of the ventilated pocket. This feature provides a full-fledged air circulation, extremely important for any room. Such linings are more expensive than corner, which is explained by the complexity of their manufacture and large amounts of material consumed. Standard width of rectangular skates – 115-120 mm, the size of the rigid ribs is in the range of 30-40 mm.

Types of skates for professional flooring and their installation

Rounded

These lining, also called semicircular, have one characteristic feature. They are installed in situations when a wave profiled sheet is used. Such elements not only counteract the formation of condensate, but also have excellent appearance.

The only disadvantage is the high cost.

The average diameter of the rounding overlays under consideration – 210 mm, the size of the side shelves – 85 mm.

Types of skates for professional flooring and their installation

How to improve protection?

Despite the fact that skates close the lumen at the junction of two slopes, they cannot guarantee complete sealing. To solve this problem, the seal is used – an invisible element of the roof that increases the efficiency of using overhead planks. In particular, he:

  • Provides tightness of all joints, filling any gaps;
  • Performs the function of the barrier, preventing garbage from entering, dust and insects into the space under the roof;
  • Protects from all types of precipitation, including those accompanied by a strong side wind.

At the same time, the structure of the sealer allows him to freely pass the air, due to which its use does not prevent ventilation.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

There are 3 main types of materials under consideration.

  • Universal. Made in the form of a ribbon performed from foamed polyurethane foam. Characteristic feature – open porosity. Often, one of the sides of such products makes adhesive, which is positively affected by the convenience of work. The ability of the material to pass air is sufficient but not optimal.

Types of skates for professional flooring and their installation

  • Profile. Such seals are characterized by greater rigidity and closed. In contrast to the previous variety, produced from foamed polyethylene. Could repeat the sheet profile, so that the lumens are completely closed between overhead and roofing. In order to avoid reducing the level of air circulation in such a seal, special holes are provided. The latter can be left closed – subject to the presence of pitched or skate aerators.

Types of skates for professional flooring and their installation

  • Self-resistant. Produced from polyurethane foam, impregnated with acrylic, and is equipped with a sammoklet strip. After installation, such a material may increase 5 times, filling any lumens effectively. Requires the installation of aerators.

Types of skates for professional flooring and their installation

The smallest value can be praised the first option, while the third guarantees the maximum degree of seal.

Training

Before starting to install skate linings with your own hands, it is worth paying attention to the following moments.

  • Determination of varieties and number of mounted products. When calculating the latter, it is necessary to take into account that the installation of skates is performed. With special care should be approached to the size of the overhead planks – the error assumption may affect the appearance and functionality of the finished design.
  • Installation of crates. It must consist of a couple of places placed nearby, be solid and located under the upper edges of the roof. This condition is explained by the fact that the fastening of the skates is carried out in the crate.
  • Verification of the distance between opposite professional sheets. Optimal value – from 45 to 60 mm. A smaller distance between the upper edges makes it difficult to exit a pair of roofing, and large – prevents the correct mounting of the lining.
  • Inspection lines of the joint of two rocks. It is desirable that it be perfectly smooth, and the maximum allowable deviation is 2% of the width of the shelf.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

In a situation where the last condition is not performed, the risk of roof. To avoid this trouble, you should choose a bit of a wider shelf.

There is an alternative solution – re-laying roofing materials, however, in comparison with the previous way it is less rational.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Mounting

Works on the installation of skates for professional flooring It is advisable to start with the leeward roof side, in accordance with the following algorithm.

  • Installation of the seal. If the selected material is equipped with a self-stroke strip, work is greatly simplified. In other cases, the fixing of the insulation is carried out with the help of submitted means. Materials can be attached to both the back of the skates and profiled sheets.
  • Installation of overhead planks. For most types of products, it is performed with an overlap at 15-20 cm. The exception is rounded roofing skates, which have a stamping line. If you need to cut off the bar, it is desirable to use scissors for metal, and not angular grinding. This recommendation is particularly relevant for plates having a polymer coating.
  • Final fixation. Making sure that the horse for the professional flooring is located exactly, it remains to be screwed using roofing screws. You should drive them into the crate, passing through the metal layer and withstanding the distance of 25 cm between adjacent points. It is equally important that the screws are at a distance of 3-5 cm from the lower edge of the patch plank.

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

Types of skates for professional flooring and their installation

    To simplify the installation procedure, experts advise first to mount the skates on the edges, and then screw all other screws. The most suitable tool for solving this task is a screwdriver. As for nails, it is permissible to use them for installation, but it is undesirable: in the case of hurricane wind, such fasteners may not cope with the load and break out.

    Summing up, it remains to state that correctly installed skates for the professional flooring protect the roof from a variety of negative factors, guaranteeing its reliability and durability. The justice of this thesis is regularly confirmed by the practice, and anyone can make sure of this on its own experience.

    Types of skates for professional flooring and their installation

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment