Rabit Mesh Dimensions

Rabita grid is the most affordable and versatile building material. It makes a lot of it: from cells to fences. In the classification of the material to figure out quite simple. The grid may vary the sizes of cells and the thickness of the wire itself. Also there are rolls with different widths and heights.

Sizes of cells

The grid is penetrated from wire with a diameter of 1.2-5 mm.

  • Rhinestone mesh weaving produced at an angle of 60 °, which is regulated by GOST.
  • For square weaving It is characteristic that the metal is located at an angle of 90 °. A similar grid is more durable, which is very valued in construction work.

In each embodiment, the cell has four nodes and as many sides.

  • Usually Square Cells are of 25-100 mm;
  • Rhombovoid – 5-100 mm.

However, this is not such a strict separation – you can find different options. The cell size is characterized not only by the sides, but also the diameter of the material. All parameters depend on each other. The size of the chain grid can be specified both 50×50 mm and 50x50x2 mm, 50x50x3 mm.

In the first version, the weaving node and the thickness of the material. By the way, it is 50 mm and 40 mm are considered standard. At the same time, cells can be less. Options with parameters 20×20 mm and 25×25 mm will be more durable than large. This increases the weight of the roll.

Maximum cell size is 10×10 cm. It happens 5×5 mm grid, it is much worse missing light and can be used for sieves.

Rabita is divided into 2 categories by measurement accuracy. So, the first group includes material with the smallest error. The second group grid may have more substantial deviations.

According to GOST, the nominal size may differ from the actual from +0.05 mm to -0.15 mm.

Height and Length

It is especially important to consider the size of the roll, if it is planned to produce a fence from the chain grid. The height of the fence will not exceed the width of the roll. Standard indicator is 150 cm. Mesh width is the height of the roll.

If you turn directly to the manufacturer of the building material, then other sizes can also be purchased. Rolls of 2-3 m are usually made to order. However, for the construction of fences, such sizes are used extremely rarely. It is 1,5-meter rolls most popular.

With a length, everything is much more interesting, Standard size – 10 m, But on sale you can find up to 18 m in roll. Such a restriction exists no accident. With too much size, the roll is obtained very fun. Rabita will be problematic even to simply transfer on the site alone.

The grid can be sold not only by rolls, but also by sections. The option with the section looks like a metal corner with a tensioned slave. Sections are purchased in the desired quantity and are used directly for the fence, wickets. Interestingly, rolls can be combined with each other, so the limitation of 18 meters does not affect the size of the fence.

How to choose?

Rabita grid is used for various purposes in everyday life and during construction work. The fencing from such a material is used on dachas, where you do not need to create a shadow zone or hide something from strange eyes. Establish such a fence is very easy, and it does not take much time. Usually, the chain allows you to separate the garden or divided the yard itself to zones. The mesh with a small cell size will be a good cell manufacturing material. So, the animal will be clearly visible, inside there will be a constant circulation of air, while the animal will not run away anywhere. At the factories and in other industrial spheres, such a chain is used for protective fences of some dangerous zones.

Pretty common grid and construction. It allows reinforcing pipes and plaster, used in the manufacture of bulk sex. Rabita grid can be sold with or without it. The last option is perfect for the construction sphere.

Black grid It is worth using where it does not contact the environment where there is no risk of metal oxidation.

Fine mesh coated It is worth choosing when you need to hold something. So, the material is useful when arranging the sports field or tennis court.

If the earth crepts and you need to fix the slope, then you should choose the material with the finest cell. The same chain can be used to sift something.

With the size of the grid, everything is clear: the stronger the material is needed, the smaller the cell is worth buying. However, the challenge differs on the coating.

  • Rabita woves from thin wire. It is quite important to protect the material from banal rust. The best option is to purchase a galvanized steel product. If the coating is applied by the hot method, the grid will last about 20 years. It is such a chain that it is worth choosing for the manufacture of fences and other things that need for a long time. If it is planned to make a cage for a couple of years, then you can take a challenge with cold or galvanic galvanizing. Such a grid is less durable, but more affordable.
  • There is aesthetic grid. In fact, it is galvanized steel with PVC coating. The option is expensive, but durable: serves about 50 years. Neat and attractive chain chain can be used for registration of fences and other decorative elements. But the cells for animals do not do from it: a bird or rodent may accidentally eat a polymer. The color of the coating can be any. More often occurs a polyvinyl chloride coating of bright acid shades.

When choosing a chain grid, it is necessary to guide only the purpose of buying. Production of a simple fence will require galvanized material, possibly decorative coating. The size can be quite large.

Cells and protective fences should be made from a shallow galvanized grid. Any construction work allows you to choose a challenge without a coating with a medium or small cell size.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: