Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Frame houses from a bruse with an attic on typical projects are greatly popular. Such standard solutions make it possible to create full-fledged housing from pure material quickly and economically. Therefore, it is worth considering the various projects of such buildings.

Projects of houses from a bruse with an attic

Peculiarities

Country houses of various squares, built on finished projects, is raised quickly and with minimal cost. They are all elements, sizes, use of the useful space, engineering calculations are thought out as efficiently as possible and ergonomically. It is especially noteworthy that it is not necessary to wise with the development of your own individual plan, create drawings and produce complex calculations. Houses from a bar on finished projects require only construction work.

Houses from a bar with an attic allow us to maximize the useful space indoors, In housing almost the square remains unused. It is possible to make a pretty and cozy attic room with a balcony.

The attic itself means a residential premises under the roof of the building, such architectural techniques began to use since the days of Middle Ages. It is possible to organize an attic room and in modest country houses from a bar made by finished projects. And it will look quite original both outside the site and in the interior.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Pros and cons

The frame house from the bar with the attic has the following advantages:

  • Since it does not give a shrinkage, you can sit in it immediately after the construction;
  • The tree is an environmentally friendly material, harmless and safe, in such a room is supported optimal humidity without forming fungus and mold;
  • durability – with the right construction and operation of the house from BRUSEV can stand up to 100 years;

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

  • The minimum construction time is the wall and roofs on the finished belt foundation for 3-4 days;
  • The low cost of the material, in addition, during processing, the bar practically does not give waste;
  • Due to the natural beauty of texture and high heat insulation, wood allows you to save on finishing and insulating materials.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

The main disadvantage of such buildings is fire hazard. Even, despite the use of refractory impregnations and mastic, a wooden bar will always have high combustible properties, in this he is much inferior to brick, concrete, gas-silicate blocks and other non-wooded materials. This is perhaps the only substantial minus, the rest of the same houses are very profitable, especially since there are many ready-made original projects.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Design options

The projection profile of such houses is usually square (6×6, 8×8 kV. m) or rectangular (6×8, 6×9 kV. m), less likely there are options with a serving veranda, a terrace, terrace. Such projects are more complex, including on laying the foundation, but increase the internal space, allow you to have additional service or recreational premises in the building. Depending on the location of the rooms, the useful living area can be from 30 to 80 kV. M.

The first floor in the simplest options is divided by a partition for 2 rooms, In more complex projects there may be a hall or hallway, 2 bedrooms, as well as a bathroom, bathroom or storage room. The staircase between the first and second floor may be one-time – it saves useful living space, but it makes the rise and descend more complex, requires installation of sharp steps.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

For convenience, you can build a two-flying staircase with spans located in parallel to each other, such a method is the most ergonomic.

An attic room can be with one room or with two, it all depends on the area of ​​the base and the project of the house. Attic may well be equipped with a small balcony or loggia with a frame from the same profiled timber. Typically, the room is placed under the roof itself, in which the rafter frame is trimmed with plywood, plastic sheets or clapboard. Niche between the inner finish of the attic and directly the roof can also be effectively used, for example, making small storage rooms there, having conducted inside communication or placing household appliances there.

The house with the attic floor needs additional heat insulation of the roof. If he is constantly residential, it is also worth protecting it and from moisture. The insulating material is effectively used to use fengistant, foam, mineral wool with a layer of polymer film.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

If a stove heating pipe passes through the residential attic, which is often found in such projects, it is also necessary to isolate and conduct a finishing decorative finish.

Materials

Brusade house can be built from several materials.

  • Massive bar – these are solid trunks of natural wood, dried, with aligned surfaces. Section can be square or rectangular. Such material is very durable and has an impressive appearance.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

  • Profiled bar Used most often. It is made of a massive bar, grooves and protrusions are made on the side of the sides, thanks to which it is going to a reliable sustainable design.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

  • Glued bar represents several boards bonded under great pressure. To prevent the twist of the crowns in the masonry of the board, stacked fibers in different directions. The advantages of the glued bar is that it does not crack and does not give a shrinkage.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

  • Sip-panel Made by gluing multiple chipboard with thermal insulation layer between them. Due to this, this type of building material is very warm and has high strength.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

  • Brux with imitation of natural logs, Highly spectacular and impressive.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

As for the tree breeds themselves, the most often used pine as the cheapest, but practical material. Pine timing is soft, easy to handle, has a small density and good heat insulation. But this wood is very sitting, gives cracks with time, unstable to mold. Much more dense and stable are bars from cedar and larch, but they are worse in their heat insulation.

Any option of the house of a bar with an attic must be built on the finished foundation, who hardened and gave a normal shrinkage. It is made of reinforced concrete based on cement and sand. The foundation may be slab, columnar or tape. The last kind is most common, as it is a one-piece foundation at any point of the wall of the house, and provides the greatest stability of the building from two or more floors.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Arrangement

Although the tree has good insulating properties, but the houses from the bar need additional insulation. This is especially true of attic, which is less than the lower floor protected from wind and severe frost. The correct solution will be the insulation of floors on both levels of dwelling with eco-art or polyurethane, which are seen in the rafter system. The windows of the first and second floor, the balcony doors also need to be securely wasolate with silicone or mounting foam.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

During the arrangement of the attic room, it is necessary to take care of natural ventilation. It will be especially relevant in hot weather, when the roof is very hot, and the former or balconies in the attic is not provided.

When carrying out electricity in brusade houses with an attic best laundry electrical cables in plastic boxes or corrugated tubes. They are created from non-combustible materials and will serve as an additional protection easily susceptible to fire dry wooden bruus. Water pipe and sewers are best laying out with the help of flexible and durable polypropylene pipes.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

Examples of projects

Among popular projects 8×8 and 6×8 kV. M can be noted the simplest solution with a covered terrace, two rooms, a small lounge and a bathroom on the first floor and one spacious bedroom on the second subchanging floor. The minimum number of items, a simple drawing, easy assembly make this project very affordable. With dimensions of 8 to 6 m, this house will be comfortable and spacious for a family of 3-4 people, in it you can easily live all year round.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

House of profiled bar 200х200 mm with dimensions of 6×6 kV. m contains a small but cozy attic on the second floor. This is the most economical option.

Projects of houses from a bruse with an attic

Houses from Bruus 6×9 and 9×9 kV. m also have ready-made standard projects. This is already a more spacious housing in which you can make a kitchen, sauna, and on the second floor it is divided by a partition two full-fledged living rooms.

Projects of houses from a bruse with an attic

Projects of houses from a bruse with an attic

About errors when choosing a project home from a bar. See next video

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment