Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

During the construction of housing, it is better to take care of the maintenance of heat in it in advance. You can do this with the help of building heat insulating materials. One of the most modern widely used insulation is “Penoplex” 100 mm.

Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

Properties

Penoplex 100 mm is the plates of extruded polystyrene foam 100 mm thick. For the manufacture of the insulation, the mixing technology of polystyrene grains in the extruder is used, where the foaming agent is supplied under pressure. From the resulting casket form sheets that are formed during cooling into finished plates. Sheet size is easy to change by cutting material.

Main characteristics include several indicators.

  • Strength. This property is very important when the structures are insulated, which are under constant pressure, for example, floors, foundation. Insulation can withstand a load of 20 tons.
  • Moisture resistance.
  • Long service life. High-quality insulation can maintain its initial properties for 50 years.

Penopelex 100 mm: Types and characteristics of the insulation

  • Fireproof.
  • Ecology. Polystyrene consists of carbon and hydrogen particles.
  • Ability to use with a wide range of temperatures. Polystyrene operation is performed with thermometer indicators from minus 50 degrees to plus 50 degrees and above.
  • High heat shield.
  • Resistance to ammonia, alcohol, alkali, chlorks, various acids.
  • Ease of use.

Penopelex 100 mm: Types and characteristics of the insulation

Application

100 mm thick plates are used in the construction of private houses or industrial structures.

Using polystyrene insulation:

  • walls;
  • ceilings;
  • floor;

Penopelex 100 mm: Types and characteristics of the insulation

  • foundation;
  • roof;
  • basement;

Penopelex 100 mm: Types and characteristics of the insulation

  • Roads, tracks, take-off stripes – the insulation prevents eyelaughter, cracking the surface when exposed to low temperatures;
  • any pipelines;
  • sewer pipes.

Penopelex 100 mm: Types and characteristics of the insulation

“Panoplex” is often used in the insulation of balconies, saunas, baths, facade facilities.

Insulation work can be carried out at the stage of construction, repair, reconstruction. In view of the unique properties, as well as relatively low prices, the scope of application of this insulation is enormous. Preventing surface freezing, moisture accumulation makes it possible to support many life support systems in working condition in any weather. To obtain a qualitative result, the appearance of the insulation is selected.

Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

Views

Among the most common varieties of the insulation “Penopelex” with a thickness of 100 mm, the area of ​​which is 2.773 m2 in the package, allocate several of the most sought-after.

  • “Geo”. Plates have a flat smooth surface of orange. Used in the construction of residential or industrial facilities. With this type of insulation, the insulation produces the heat insulation of the structures on which constant pressure will be provided, for example, the foundation or gender. Material is distinguished by increased strength properties, but has a weak fire resistance.
  • “Roof”. Plates have a flat smooth surface of orange. The material includes additional refractory components. It is used to insulate the roof of any species.

Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

  • “The foundation”. Plates have a flat smooth surface of orange. It is used for insulation of any standard structures, such as gender, walls or roofs, where there are no requirements for the increased strength of the material.
  • “Facade”. Plates have a milled orange surface. Refractory components are also included in. This material is insulated by partitions, facade structures.

Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

Terms of Use

When carrying out work on insulation, it is necessary to comply with a certain sequence of actions.

  • The base is prepared by cleaning from dirt. If there are roughness on the surface, they are recommended to be aligned with plaster. Before applying insulation, the base can be treated with a composition that prevents the appearance of fungal lesions. After complete drying of the treated surface, bent.
  • Polystyrene plates are glued with special glue. In this case, the adhesive substance is applied directly to the surface of the plate.
  • Then produce mechanical fixation using dowels.
  • After that, the plates are covered with plaster in several layers. But wood and drywall can also be used. When conducting insulation works before fixing drywall, it is recommended to apply polyethylene. It provides better vaporizion.

Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

It should be noted that when using drywall as a finish, it is better to give preference to moisture-resistant species.

To increase the adhesion when finishing the plaster The outdoor side of polystyrene plates make rough.

Penopelex 100 mm: Types and characteristics of the insulation

Penopelex 100 mm: Types and characteristics of the insulation

Tips for choosing

When choosing a heater, you must pay attention to the thermal conductivity. Not only the amount of material required for insulation, but also the degree of moisture resistance depends on. The higher the coefficient, the worse the protective properties, the more insulation you will need.

It should be noted that high thermal insulation prevents the possibility of deformation of insulating plates in a vertical position.

Penopelex 100 mm: Types and characteristics of the insulation

The structure of the surface of polystyrene slabs must be solid, smooth. Otherwise, there is a risk of setting dampness, which can later lead to the emergence of dangerous microorganisms that are not only destroying the material itself, but also harm to health. Material can be checked by immersing it into the water for several weeks.

The qualitative composition is characterized by the absence of crumbs or ability to change the form when conducting insulation.

When choosing a heater, the evenness of the edges should be checked. The surface can be tested by pressing its base. In the case of a premission from such a insulation, it is better to refuse.

Penopelex 100 mm: Types and characteristics of the insulation

The result of insulation depends on the correctly selected type of insulation, its operational characteristics.

About how to perform insulation of walls “Polyeplex” with their own hands you can find out, looking at the video a little below.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment