Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Under the influence of tough climate and adverse weather conditions, residents of most regions of Russia are constantly thinking about the insulation of their residential premises. And not in vain, because comfort in the house depends on the favorable temperature inside. According to statistics, about 90% of houses do not meet the heat resistant standards. Of course, ultra-modern buildings are erected already in accordance with the latest heat insulation standards. But the walls of old houses must be insulated, due to which heat loss will decrease to 40%.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

A huge selection of building materials in the modern market is impressive and often introduces to a dead end, among them it is not easy to navigate to professionals. Recently, thanks to new technologies, many new products of heaters with improved technical characteristics have appeared. One of these materials – liquid thermal insulation. If you still think about the question, how to insulate your walls, then surely after reading this article you decide on the choice of insulating material.

Peculiarities

In the construction industry, every year all new compositions appear. The heat insulating paint appeared not so long ago, but already found its admirers, because it is difficult to replace it. In addition to facades and walls, it can be insulated even their own car and various capacity, also use in the production of agricultural products.

Many positive reviews are represented by construction forums about this product, which suggest that this type of thermal insulation is inexpensive, high-quality and easy to use. From the very beginning, the composition was developed for the space industry, but the builders later became interested in them.

Liquid heat insulation: selection of material for insulation from the inside and outside

Under the term “liquid insulation” means two different types of insulation: paints with thermophect and foam insulation. Each of them has its pros and cons, performance characteristics and technical properties.

Liquid polyurethane insulation produced in cylinders is an innovative class of materials intended for insulation and sound insulation. It is often chosen to finish complex areas. With it, even a large area you can insulate on your own. It is suitable for the insulation of structures from any material: metal, brick and concrete, for thermal insulation works in attics and attic.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

The liquid ceramics insulation based on ceramic glass is used for the insulation of walls outside the building, resulting in a natural heat exchange, therefore, the building will not cool, and in the summer heated. In addition, this kind of insulation will protect the structure from mold, rot and moisture. Thanks to this processing of walls, the cost of home heating is significantly reduced.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Pros and cons

The advantages of foam liquid heat-insulating types of insulation can be attributed:

  • Effective reduction in heat loss and heat saving;
  • perfectly absorb sounds;
  • Easy to use even for users without experience in construction;
  • Simple and quick installation;
  • high degree of adhesion;

Liquid heat insulation: selection of material for insulation from the inside and outside

  • environmental Safety;
  • non-combustible;
  • Low flow;
  • not “loved by” mice;
  • do not require special installation equipment;
  • have anti-corrosion and antiseptic properties.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

For paints with thermophect, we highlight the following advantages:

  • The liquid layer will not reduce the space area, since its maximum layer is not more than 3 mm;
  • water-repellent properties;
  • decorative effect with metal glitter;
  • Due to latex, the liquid insulation is moisture-resistant;
  • high-quality reflection of sun rays;

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

  • heat resistance;
  • Minimum labor rates when installing;
  • no load on the walls;
  • Increases the life of processed pipes;
  • High speed processing of large areas in short time.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid insulation – an indispensable thing when insulation of hard-to-reach places.

It should be noted from the disadvantages, the fact that the type of insulation, as a heat-oil, is not suitable for wooden walls from a bar or logs, as well as its sensitivity to temperature drops during storage and transportation is quite high.

Some buyers point to such minuses as a high price and a limited shelf life of open packaging.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Specifications

For the first time, polyurethane insulation was created by German scientists in 1973 on the basis of polyol and polyisocyanate. Now, depending on the composition of additional substances, produce up to fifty different stamps of PPU. This type of insulation exceeds its competitors in many ways. Water absorption is characterized by low absorption, and high adhesion with various surfaces is the main advantage and feature of PPU. Solidification occurs in twenty seconds, and the material obtained will serve at least thirty years.

Thermocracy, or warm-water in its appearance, is no different from the usual acrylic paint, even by smell. It is easy to apply, is distributed over the surface with roller, brushes or sprayers. It is used as insulation for walls from the inside and outside. Insulated thermocracy components are particles of glass ceramics, titanium and latex dioxide, which gives sustainability and prevents cracking. It also includes acrylic, which plays the role of the base of the whole mixture.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Manufacturers claim that liquid ceramics insulation is a completely innovative insulation technology, according to which The thermocracy layer in 1.1 mm is able to replace the mineral wool layer with a thickness of 50 mm. This indicator is achieved due to the presence of inside vacuum heat. A brilliant coloring from glass ceramics and titanium derivatives will protect the walls, reflecting infrared radiation. You can spend an association with a thermos coated.

If you decide to paint the walls of your house, it is best to immediately choose a thermocracy, so you will kill two hares – will warm the house and give it an aesthetic decorative highlight with a metal glitter.

Also treating the mixture of internal or outer walls of the building, you protect them from corrosion and fungus.

Liquid heat insulation: selection of material for insulation from the inside and outside

Views

Liquid thermal insulation is represented by several species.

Penosole and Polyurethane Foenethane

Both types are included in the foam group. If you look at them for the first time, you can easily be confused with the mounting foam. Important advantages of foamizol are good vapor permeability and low temperature (from +15) solidification, as well as fireproof. It does not burn and does not distinguish dangerous toxic gases.

Penosol fills emptiness perfectly, while not swollen in volume. However, builders note such minus foamizol as the formation of cracks, which leads to its shrinkage over time and a decrease in thermal insulation. Another drawback is the impossibility of applying by spraying. This type of insulation can be applied only by filling.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Polyeneetan – polyisocycle and polyol derivative. For many professionals in construction business, it can be a discovery that liquid insulation based on polyurethane foam is produced in two versions: with open and closed voids. This moment has a serious impact on thermal conductivity and vapor permeability. The advantages of this type of thermal insulation are good adhesion with any type of surface, environmental friendliness, low sound operating and resistance to temperature drops.

Both types are safe for human life and have excellent technical quality. Is that the price difference is quite significant – if the house inside and outside can be inspired by the house in and outside, then the polyurethane foam finish will cost you much more.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Ultrathine thermocracy

The simplest liquid insulation for walls and floors. Warming with this type of liquid insulation – a very interesting process, similar to the ordinary painting surface. Insulated colorful mixtures have a unique composition and structure that forms a thin thermal film.

Due to the fact that the film is very subtle, insulation is produced in several stages.

Separate attention deserve heat-based heat-based ceramics, which for drying form ceramic crust. You can apply this composition everywhere and any way convenient to you: a tassel or spacing.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Manufacturers and reviews

There are already a sufficient number of domestic and foreign manufacturers of liquid insulation on the market.

Main manufacturers:

  • “Actor”;
  • “Isollala”;
  • “Heator”;
  • “Tezolat”;
  • “Astrak”;
  • “Thermosilate”;
  • “ALFATEK”;
  • “Ceramizol”;
  • Thermo-Shield;
  • Polynor.

Thermal insulation of concrete, bricks and foam block can be carried out using the tool “Actor Concrete”. It is insulation from the inside, which has many undeniable advantages at average price on the market:

  • Lack of smell (some funds from other manufacturers are encountered ammonia odor);
  • Coating is not resolve, the tool does not even need to mix.
  • Has less water absorption compared to the analogs, the tool is not afraid of water.
  • Large thickness of applying up to 20 mm is possible.
  • Quickly dries – 20-25 minutes at room temperature.
  • After drying, the agent becomes 15-20% stronger than analogs.
  • The tool is very easily applied: the process is comparable with paint.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

The most popular creators of liquid thermal insulation are the firms “actor”, “Corundum”, “Armor”, “Astrak”.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Reviews about liquid isolation “Astrak” It is suggested that this is one of the best materials of the modern market, which is characterized by anti-corrosion properties and is able to withstand the temperature to +500 degrees. The composition of thermal insulation based on polymer dispersion and special fillers is a homogeneous mass, similar to consistency with mastic, which is easy to apply brush or spray. Products from “Astrak” high quality and safe.

When applying “Astratka” use special brushes and sprayers, which will easily allow you to perform work with your own hands.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

The minimum isolation service is fifteen years old, but when compliance with all the norms of operation, the term increases to 30 years of minimum.

High-functional hyperfine liquid ceramic thermal insulation from “Corundum” – a modern coating that is presented in a wide range on the market of any city of Russia.

“Corundum” offers several types of insulation at once:

  • “Classic” For processing walls and facades, as well as pipelines;
  • “Winter” It is used to protect surfaces at minus temperatures;
  • “Antikor” Used to process areas susceptible to rust;
  • “Facade” – Special composition for exterior walls and facades.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Domestic products of the company “Armor” is also divided into several modifications: “Classic”, “Antikor”, “Winter” and “Facade” – everything like the company “Corund”. Also presented “volcano” – a mixture capable of withstanding temperatures above 500 degrees.

Norwegian Polynor Based on polyurethane became famous in Russia quite recently, but for such a short time, the love of builders earned because it can be used on any surface, and with the help of special nozzles, the spraying is carried out without problems even in hard-to-reach places. No seams reduces heat loss. Polynor product has ease and environmental friendliness.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

The average price of manufacturers is about 500-800 rubles per liter of liquid waterproofing.

How to choose a quality product?

In order not to make a mistake in the choice, spending wasting money, you need to choose high-quality products for use when insulation. The lower the density of the coloring mixture, the higher its useful thermal insulation properties will be.

Liquid heat insulation: selection of material for insulation from the inside and outside

After mixing good warmlook, get droplet between your fingers. If the surface is rough due to the presence of a large number of microspheres, it means that you can not doubt as the selected product.

Recommendations for application

Warming with liquid insulation – a fairly simple procedure, which is produced in several stages and is similar to staining with paints. Before starting work, measure the total area of ​​the room and purchase the required amount of thermocracy.

When purchasing, consider that for better heat maintenance, the surface will have to cover several times. Depending on the conditions and climate of accommodation, it may be necessary from three to six layers of paint.

Liquid heat insulation: selection of material for insulation from the inside and outside

Choosing a specific manufacturer, focusing on customer feedback and professionals.

Prepare the surface to apply the mixture, clean from dust, dirt, close the spacure slot and seams. To improve adhesion, treat the purified surface of the primer. The paint will never stick to the dirty walls, it is possible to detret or disruption of tightness. You need to do the work only with good and dry weather conditions.

The first layer is applied as a primer. The time of final polymerization is about one day.

Liquid heat insulation: selection of material for insulation from the inside and outside

You can also use liquid heat insulation on top of the spit, and after applying it is possible to separate with wallpaper or ceramic tiles.

You can apply a liquid-ceramic insulation with an airless sprayer or a special roller. The roller must have an average pile length, so he will capture at a time more paint. Do not forget before use thoroughly mix the composition by a building mixer. Do not allow skips, paint the wall with small areas. Corners of the house and other hard-to-reach places are missing for a brush.

The next layer is applied only after complete drying of the previous. If the first layer you applied with horizontal movements of the roller, then the subsequent should be painted by vertical. So you will strengthen insulation.

Liquid heat insulation: selection of material for insulation from the inside and outside

Liquid heat insulation: selection of material for insulation from the inside and outside

Sandwich technology can be applied when insulated with very hot pipes. This practice implies a fivefold alternation of a layer of liquid ceration with fiberglass layers. If you want to get a flawlessly smooth surface, then apply the usual bandage or gauze on the finishing layer and cover technical varnish for glitter KO85.

Recently, a large demand for foam liquid insulators and equipment for their use. In terms of installation of installation, liquid foam insulation differs from mineral wool and other materials for the better. The whole process can be performed alone, without assistance. For example, comparing with rolled or block insulation, foam allow you to install in a short time, literally in a few hours. And financially they also won significantly.

Liquid heat insulation: selection of material for insulation from the inside and outside

The principle of operation is simple: after you have prepared the surface, spray the foam on it from top to bottom. Feed consumption Adjust using the valve shutter on the mounting pistol. The thickness of the layer should not exceed five centimeters.

Useful advice

  • When working with thermocracy, be sure to put on the respirator. It is very easy to blow in pairs, despite the fact that the paint dries very quickly.
  • Before applying the foam insulation in the cylinder shake you need for three minutes.
  • Polyurethane insulation when applied can cause irritation of eyes and skin, so use special building glasses and protective suit.
  • The better you align the surface of the coating, the better the heat insulation will be less and less.
  • Heat insulation mixture of thermocracy. Prepare directly before using the use. Mixing repeat every half an hour, do not allow paint bundles.
  • Some formulations having a more dense consistency, if necessary, dilute with conventional water.

Liquid heat insulation: selection of material for insulation from the inside and outside

    • If you use a foam insulation to insulate holes, then before starting the space, start the air jet from the compressors in the slit and check if there are no “dead” zones.
    • Work always top down.
    • When insulation it is possible to combine several insulating materials. For example, the walls can be insulated with mineral wool, hard-to-reach places to fill with foaming, and the floors to paint with liquid ceramics.
    • Upon completion of working with a polyurethane insulation, a mounted gun must be cleaned with a liquid solvent.
    • An unpleasant foam can be immediately rinse with water.
    • If you want to insulate the facade, it is better to choose liquid insulation with the “Facade” marking from the company “Corundum” or “Armor”, which are intended for the outer decoration of the walls.
    • Each manufacturer indicates instructions with appointment recommendations on packaging. Strictly follow the outlined instructions so as not to break the technology.
    • When choosing a insulation, focus on your financial capabilities, as well as on the principle of work.
    • Evaluate your strength and resources. If you are not sure to handle, then trust the specialists in order not to lose time and the money is wasted.

    On how to use liquid heat insulation, see next video:

    Rate article
    ( No ratings yet )
    Share to friends
    Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
    Add a comment