How to get rid of water in the cellar?

How to get rid of water in the cellar?

Residents of private houses are sometimes asked by a question that is associated with moisture in the basement. Especially participated such appeals to builders in the spring – with the beginning of floods due to the spills of rivers. Some owners simply cease to exploit this part of the house, accusing in the nature and thinking that the waterproofing of the basement – the case is complex and expensive. However, with the development of technologies to make waterproofing the basement with their own hands will not be much difficult.

How to avoid?

It is not necessary to harm – easier (and often much more economical) to build a good cellar from the first attempt, rather than modify without end, redo. For this reason, at the same time it is necessary to thoroughly seal the walls of the base of the house and timely remove water from it. In the event that the water still sneaks into the cellar, try to get rid of it as soon as possible in order to save a basement from excess moisture.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

How to get rid of water in the cellar?

The far-sighted owner already during the construction of the building will surely bother about the appropriate organization of the drainage design and on impeccable waterproofing of basement rooms. The drainage system will undoubtedly help unnecessary moisture to move deep into the soil and no contact with the cellar, and the moisture in the basement will not be a significant problem.

According to the perimeter of the basement of the previously built building allowed to make drainage channels. And if there is a chance to establish them and from the inside of the basement. In order to do this, as a rule, apply a false parquet.

If the cellar flooded or only pours, it is urgent to deal with the problem. If itches from groundwater, then they need to take and dry the design, and so you can protect the cellar.

How to get rid of water in the cellar?

Sealing the walls of the zero-level foundation

Soaking the soil near the base of the house, water forms a hydrostatic effect, asking it through all damage and joints of the base of the house. Refractory isolation will be the first protective feature.

Among those specialized for this action of the compositions are the most popular – materials with the content of bitumen, applied to the base of the house externally. Bitumen lowers the porosity of concrete, but in the future it loses in flexibility and is done more fragile, which leads to cracks. A variety of plasticizers improve the situation, but their defense will become short.

Numerous developers prefer data coverage due to low prices, but buyers are obliged to be careful: the period of action of such compositions is approximately 5-6 years.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

Polystyoltilol is effective in order to save the integrity of the coating during the backfill of the base of the house. This material is stable, very durable, as well as resistant to bacteria living in the soil. The polystyrene tile contributes to the thermal discontinuity between the base of the house (foundation) and the fallen soil. Despite this, manufacturers claim that the currently extreme flexible coatings do not require protection, but it is not necessary to reject another insulation for the foundation walls in a residential building.

Before applying the coating on concrete you need to clean the plane. In addition, it is necessary to properly establish the height of the level of land at the end of land, and when applied, this coefficient should be taken into account. Incorrectly defined level will lead to the fact that under the backfill there will be part of the wall without due (or at all without any) waterproofing. Insensible cracks from shrinkage in the foundation with time will lead to leaks and shrinkages, so it is necessary to process the entire foundation with a stock.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

The replacement of moistureproof coating will be geocomposition (as part of a drainage base, special filter and diaphragms) drainage mats, Attached to the founding walls of the house.

The problem of using similar polymeric materials relevant: in the absence of effective drainage of the soil at the base of the house, the water hydrostatic pressure will push the water upstairs between the walls and mats. In this embodiment, water will penetrate through various cracks in the foundation wall.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

Sand and gravel – purity in drainage pipes

In order to maintain the dryness of the basement, the removal of water from the building is important. The main component of the drainage design may be an ordinary polyvinyl chloride tube in 100 mm. All because it’s most likely that a special pipe with perforated slots is difficult to put directly, and each error in the laying initiates the clogging of structures and weak drain. In addition, the slits are rapidly clogged. In the ordinary pipe, it will not be difficult to drill a couple of rows of holes in 12 mm. Row of layers of filtering matter wrapped near the pipe, prevent pipes.

Work on the part of the water removal occurs from digging the trench right up to the base of the base of the house. Next, the filter material is unlocked and placed edges into the ground according to the side trench walls.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

On top of the matter, grave is poured, it is spilled, and then a polyvinyl chloride tube is placed with a slight orientation of the outlet tube. In this step, you need to combine with the sheer risers of water drives, located in a plane, with drainage pipes of the foundation sole. In the further grid of the water drivers filled with gravel so that they do not scoring the garbage.

Gravel poured over the pipe. Its level should not get to the upper edge of the sole approximately 20 cm. On top it covers filtering matter. In order to restrain it, another row of gravel is stacked on top or several sand shovel.

A more unhurried filtering motherboard with from above it drops approximately 15 cm of sand. As a result – stable and efficient work of the drainage design (the sand protects the material, and the material – pebbles).

How to get rid of water in the cellar?

How to get rid of water in the cellar?

With such a layout of moisture in the basement, it is unlikely to be a problem. External drainage of the foundation soles must be carried out with a radiating of 2-3 cm per 1 m pipe length (or more). In case, in the amount of drainage designs, it is superior to 60 m, then it is necessary to reflect on the additional criteria, for example, about increasing the transience of the output tube.

If there is no significant roll on the spot, either close to the storm sewage channel, it will be necessary to bring drainage soles of the house at home to the pump. At the same time, the tube that combines the external contour of the design of the drainage with the pump is carried out to the watersample according to the largest route.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

It is worth allocating that the inner contour of the drainage design should not be combined with its external sector.

This is due to the fact that the threat of the appearance of problems in the external component is significantly more than in the internal: violation in the external contour of the United structures will lead to the flooding of the basement, as water will follow the mansion.

The reason for the huge share of water problems under the housing is considered to be overwhelmed with backflow. Impaired coating spraying overlaps to the tolerance of water through different drawbacks of the base of the house. Filled along the base of the base house perforated polyvinyl chloride tube removes excess water from the building. Produced from gravel, sand and special canvas special filter protects the design drainage from pouring.

If you do not worry about the removal of rainwater flowing from the roof, it will be found in the cellar.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

How to get rid of water in the cellar?

Organization of drainage

In addition, the problem of water in the basement will help solve the competent drainage. Will the water from the drainage gutters away from the building – such a decision may seem at first glance. However, not all buildings have an effective rainwood drainage. Another method to lead the rainwater is to combine drain pipes with a multi-lifted, having a strong bias from building.

Due to the accumulation in the chutes of the garbage, the diameter of the drain pipes must contribute to a reliable diversion of moisture, including during the shower, no less than 100 mm. In this case, the best removal tube for the design – 150 mm.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

All sorts of freedoms and bends are not welcome in the drainage channel, as they certainly clog in a variety of garbage and other elements of life. In case the length of the gutter is more than 5 m, then you should think about several outlet channels.

And more: the tap pipe of the rain drains should not be attached to the drainage system soles of the base of the house. The maximum probable blockage of the drainage design can grow into blockage of the whole drainage design.

What to do and how to remove?

The inner circuit of drainage (concentrates water from the walls of the house), isolating near the concrete plate (it does not give a pair and water to rise upstairs), a durable pumping electrical circuit – here are three forming effective basement drainage designs.

How to get rid of water in the cellar?

Under the stove of concrete placed a gravel layer 20-25 cm wide. Such a filling is a durable concrete pillow, providing drainage under the stove. Already after laying gravel, vapor barrier from high-blooded cellophane is installed. The canvas overlap, the smallest – at 40-50 cm, and with the support of adhesive tape junctions close.

Such isolation does not support specialists involved in concrete, as it can not give moisture from the solution to move into the ground, and this extends the technological cycle. However, this task allows the sandy layer with a width of 70-80 mm filled over insulation.

Second option – isolating under gravel. In each case, there are short benefits from intact insulation under the construction of a stereo assembly inconvenience.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

The bog of the basement and the foundation wall of the house is the best space for picking up and removing the water falling into the basement. A rather effective method of capturing water is considered a plastic profile located under a plate of concrete. This kind of apron is delayed by seeping through the walls. Holes in the profile allow moisture to penetrate into gravel near the slab, from where the water is pumped out the pump.

How to choose?

Well functioning electrical capacity – the basis of drainage structures. From how correct and correctly it works, the quality of excessive moisture is depends on. There are a number of criteria for which you need to pay attention to the selection of this device.

  • First of all, the design should be metallic (cast-iron) block-housing.
  • It is also necessary to pump off dirty water with rigid connections of 10-12 mm.
  • And it is still important to presence from the pump an automatic float switch, which is very unpretentious and simple from a technical point of view.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

The pump is located in the middle of the plastic moisture console filtering water and collecting it. Similar perforated container is installed in a layer of aggregate. In the waterborg, water comes from the inner contour of drainage designs through its side wall. The capacity is obliged to be an airproof cover: it will prevent the process of evaporation of moisture, which can get into the basement, and also will protect the water collector from entering various objects that can upset the operation of the switch.

But it is very dangerous – trust the dryness of the basement only the pump. In the conditions of de-energization of the building due to storms, the cellar will be quite rapidly fill the water. In order to progress, the design is equipped with a spare pump on rechargeable batteries, mounted in the water collector, in which place is the main pump. The injection air liner for it can be used the same.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

In very effective systems, pumps are used that are equipped with batteries and refueling devices for the purpose of prolonged additional use. The charging device is extremely important, since the late recharging can lead to the flooding of the basement.

Padded water, as a rule, is supplied on the pipeline in the drain, if there is one, or remove the outside as far as possible from the construction. Install the injection air lines are necessary in such a way that in winter it is not to be freezing in the winter.

Trust Installation of such systems only specialists. If you do work yourself, there are huge risks to harm both the foundation and construction in general.

How to get rid of water in the cellar?

How to get rid of water in the cellar?

Our recommendations will help you eliminate flow and remove water residues.

About how to make a dry cellar, look in the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment