Features of professional flooring C18

Know the features of Professional flooring C18 is very important for all its buyers. Having understood with the main dimensions and other technical specifications, many errors and problems can be avoided. And also worth paying attention to the installation of the professional sheet of graphite and other possible colors.

Specifications

The production of the C18 professional sheet is made in accordance with the specifications (TU) 1122. The standard always provides for the use of cold-rolled steel, clearly divided into thin sheets. This material must be devoted to galvanized. It is also envisaged by the compliance of the material GOST 52146, in force since 2003. The usual requirement of technologists is also painting on both sides.

In general, the design of the type C18 at the same time:

  • lungs;
  • durable;
  • allow you to save considerable money compared to other options.

The surface of the professional leaf can be even, and made with a wave. The dimensions of the platform between the waves are accurate 9.2 cm. Standard trapezoid step – 28.8 cm. Since it is pretty great, hardening ribs are required.

Other main dimensions:

  • The height of corrugated (wavy) plots – 1.8 cm;
  • Standard sheet width – 119 or 102.3 cm;
  • Useful plot in width – 115 or 100 cm;
  • The thickness of the steel layer is from 0.4 to 0.8 mm;
  • Typical length – 1-12 m (Sliced ​​sheet can be in any arbitrary size within these lengths).

Surface is protected by various polymeric materials. Most often it is polyester and plastisol. But foreign substances COLORCOAT PRISMA TM, GRANITE CLOUDY.

It is worth noting that the difference often concerns:

  • insulating layer thickness;
  • the level of visible shine;
  • permissible operational temperature (minimum 60, usually 80, rarely 120 degrees);
  • permissible radii of bending sheet;
  • adhesion retention when hitting a robbery;
  • resistance to salt fog (at normal acidity of the emerging environment);
  • Mass of one route meter;
  • the masses of one useful “square” on the sheet;
  • Permissible deviation along the length, width and height of the unit element.

Pretty many users choose professional colors graphite. This shade of gray looks very well and turns out to be very practical even in ambiguous cases. The official designation of graphite color – RAL 0724. It should be understood that it belongs to the dark part of the spectrum. Therefore, use a similar solution for continuous lining of large areas – not always good idea.

In some cases, the color of the painting HPS or RR can be used. The main nuances are:

  • Red color stylistly sends to bricks and tiled;
  • Brown tones are perfectly combined with wooden structures;
  • Green color in the form of any shade looks quite natural and fresh;
  • The brighter color, the visually wider the design will look (and vice versa).

Scope of application

As already understandable, Professor C18 is quite good and promising material for various purposes. It is used to:

  • decorate the roof over a continuous crate;
  • raise “fast” facilities;
  • prepare small architectural forms;
  • make canopies (above the threshold, over the automotive parking space, over the woodwoods and so on);
  • form framework structures;
  • do shield type barriers;
  • protect the walls (and simultaneously decorating them);
  • construct insulated walls – “Sandwiches”;
  • Build fences.

Mounting

Using Professional Shelter C18 can only be in secondary facilities. For capital residential buildings it is not too practical and convenient. You can feed blocks on the root or manually, or pushing on the preassed boards. Cutting professional flooring abrasive tool is not allowed. You can apply cutting scissors with an electric motor or “steel beaver”.

Under the professionalist, you certainly need a high-quality doom. Initially put hooks to which the gutter of the drain and bar of the cornice will be fixed. Next is the skating plank. Only after it comes the time of the end plank.

Mounting sheets can be exclusively on good samphs with EPDM seal.

Recommendations:

  • strictly control the tightening (it should not be excessive);
  • put the first sheet to the guide plot toward the end;
  • Placing a transverse joint exactly on the crate;
  • If possible, weld professional flooring if it comes to fences;
  • choose self-tapping screws according to the color and technical characteristics of the sheet material;
  • It is thoroughly simulating and checking before starting work;
  • Fix the sheets on the fence with the overlap;
  • All welding points to process protective substances so that they are not so spoiled with time;
  • drill holes strictly in terms of level, controlling their distance among themselves.

When making a fence from a professional flooring, it is necessary to install a bar on the top line of fence. Its color must match the selected design variation. Such item is usually fixed with self-drawing. The role of the plank – stylistically complete the composition. Otherwise, nothing complicated in it, and the installation of the professional flooring is quite accessible even non-professional.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: