Dobornye elements for professional flooring

Dobly elements are galvanized steel products used for roofing and other construction work.


Dobly elements for professional flooring have some number of features, among which should be noted.

  • Ease of installation (the process of installing the challenges is quite simple due to the simple design of the structure itself).

  • The cheapness of the material (also based on the maximum “stupid” design of the elements).

  • Performing a variety of functions (for example, moisture protection, preventing heat outlet from under the roof, delivery of aesthetic pleasure to the user).

In addition, to the last point it is worth adding that the good elements perform not only a protective and decorative role, but also coped with the distribution of air flows under the roof. In this case, the right discharge of cold and warm air masses is ensured, which is why condensate simply does not have time to accumulate.


Profiled sheets made of steel, like a metal tile, require a single style of manufacturing elements of a good. Actually, at the factory, the manufacturer first reject the desired material, and then the oppression of it. What is interesting is the thickness parameter decreases by about 3 times after such procedures. Consequently, it strongly affects the appearance of the finished product, because of which it is started to divide into groups and invent various technical appointments.

Dobors are produced in two orders: individual (cheap, but it is often necessary to fit under the dimensions of the future design) and the flow (more expensive, but much more convenient in the installation, the master is provided almost complete freedom of action). Most of the challenges used in the installation of the roof of the corrugation are installed at the final stages. However, some components are installed only before fixing corrugated sheets. Consequently, it is necessary to get acquainted with the specifics of the materials used before the start of construction work, otherwise you can get not the highest quality and aesthetically good result.

The main types of kinds for the roof are such


The most important good, used in the arrangement of the metal roof. Masters recommend applying such a good because of various temperature conditions in the rapid wooden system and the main coating. The installation process itself is performed at an early stage, when the frame of a future roof begins to manifest. The dripper is placed on top of the waterproofing layer, which is why excellent thermal conducting and moisturizing properties. Also, using a drip, you significantly prolong the service life of the future roof support. Condensate is discharged by special narrow tracks located in a dropper.

Consequently, in the absence of an individual system of drainage, a dropper should be installed, the maximum defending its dwelling thus.


These are structural design elements that are capable of forming any angle at the place of their joint (more often). As a result, the maximum simple docking of two rods or wall coating is obtained. As a matter of fact, Endow – key node in the device of the entire roofing system. A similar element is perfectly coping with the removal of atmospheric precipitation that came to the appropriate skates.

Although it enhances the highest possible burden on the roof, the endanda is incredibly protected well the roof from most factors: rain, snow, sunlight.

Planks adjoining

Such a simple combination of words is denoted by a longitudinal element, which plays a concomitant role in the roof structure. It protects front boards from unfavorable weather conditions (wind, snow, rain). The top plank of the adjoining contributes to the maximum sealing of the joints between sheets of professional flooring (metal tile) and front elements.

Such a good is most often used in cases when it is necessary to bring the pipe to the roof, ensuring the safety and aesthetics of the whole design.

Farmery planks

A similar element of the roof system as reliably and effectively protects the crate from the penetration of moisture into it. It is installed close to the drainage to provide high-quality removal of liquid mass. Farmers are used in 90% of cases, and their main material – steel. The process of applying protective layers is similar to the manufacturing process of the professional leaf and metal tile, due to which it is not worth worrying about the quality of the finished product. It turns out that the cornice bar on both sides is covered with anti-corrosion protection: zinc, soil and polymer coating on the front side, as well as protective varnish.

As mentioned above, the cornice bar prevents water from entering the crate and other important elements of the roof design. In windy weather, this element allows you to preserve the maximum heat pump inside the roof. If we neglect the rules and do not install the cornice bar, then from moisture, the front board and the fence will start grew gradually. Water will begin to fall on the walls of the house, the side wind will almost completely blow the space under the roof.

Face planks

The most typical element of creating a roof, characterized by high protective properties. The end planks “defend” a subflore space from excess winds, garbage and other troubles. The second no less important feature of the end plank is decorative. This design element closes the edge edges of the roof, giving the roof finished appearance.

Make an end bar from the professional leaf and metal tile, thanks to which it turns out incredibly durable and beautiful. The base of the bar is always covered by several protective layers, including: zinc (provides protection against rust), passivating layer (thin surface film), soil (improves adhesion for better “compound” with polymers, protects steel from corrosion) and finishing layer (performs decorative function, does not allow the material quickly to wear).

Sking planks

This element of the roof design performs a protective function, sealing various joints on the roof surface. Properly chosen ergonomics allowed us to create a normal air exchange in space under the roof. Based on the name, it can be understood that the horse is the upper part of the roof, therefore it is mounted in the last answer after the correct and reliable installation of the remaining challenges. From how correctly the installation of the skating plank will be performed, the level of tightness of the design as a whole and the overall durability of the project being created will depend.

If you speak more open and wide, then the skate planks are mounted at the joints of the sheets of the applied material along the line of the skate and the outer fractures of the roof. This type of fair elements reliably protects the underpants with water, dirt, insects, birds and other external factors from entering it.

Along with this, air exit from the underpants space is ensured, launching its ventilation and timely elimination of condensate.


This, as it is easy to guess, components for keeping the snow from avalanche-like collapse. The possibility of mounting snowstores is available on all metal roofs. Similar accessories perfectly protect the owners of houses from various situations.

In addition, snowstores prevent damage to the drain and other property located in the “risk zone”.

How to calculate?

Before starting to count the future consumption of additional elements, it is necessary to correctly calculate the volume of the professionalist itself – this is the most important rule. Such material is used exclusively on pitched roofs where the angle of the slope is more than 15 degrees. In other cases, such construction work can bring unnecessary problems, one of which is accumulating vapors and their further conversion to water, which is harmful to the profiled metal.

To determine the exact consumption of the material for the ventilated facade, it is required to take into account a number of factors: angle of slope, the number of all the rods, their depth, the amount of the adolescence. Consequently, with a bias of 30 degrees and above, attention should be paid to the fact that the backstage will be at least 10 cm, with a bias of only 12 degrees – more than 20 cm. The need and quantity are calculated on the basis of the area of ​​the future roof and the linear dimensions of the elements of. It is important to remember that almost all of the good is mounted with an indicator of the admission from 10 cm, and Endow – from 20 cm.

Many specialists recommend considering the depth of “waves”, which is characterized by the material itself, sheet thickness and the presence of rigidity ribs. Material should not be much saved, creating an increased roof slope – an unnecessary moisture will be guaranteed to accumulate, leading to rust and excessive condensate.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: