Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

There are many materials faced by builders and workers of various production. These include bitumen and tar. Externally, materials are similar both in composition and for some characteristics. That is why they are often confused. And actually remember the differences is very simple.

Differences between Hudron and Bitumen

What differ by origin and composition?

Hudron – product of oil refining, or rather, the residue after this process. As part there are oil resins, many hydrocarbons and a small share of metals. By density, the substance is comparable to water. The substance appeared relatively recently.

Bitumen is a resinous product, more often solid. It is made from Hudron. The composition of the substance is always based on carbon compounds. However, the exact components depend on the origin of the resin.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Bitumen is usually obtained due to the fact that oil deposits are not well enough to be installed. Thus, the chemical composition varies under the influence of oxygen, and a new substance is obtained. Substance may result in various chemical reactions. This is the main difference from Hudron, because the latter makes artificially. The solid is just mined.

The accurate composition of the resin and its properties depend directly on the characteristics of the original oil. And also affects the process of forming a substance. There is an artificial version of bitumen. In this case, the production of slate, coal and oil processing products use.

Natural bitumens are known to people for many years. There are historical data that such resins were used by ancient Sumeris. Then the substance was treated with floor coverings. Ancient Egyptians used bitumen in the manufacture of mummies. There is evidence that even people in neolithic fucked by bitumen copies to the base.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Hard resins in natural places, where there is a source of oil. However, now the product is rarely applied in its pure form. A variety of technologies are used to improve the properties and characteristics of bitumen. In some cases, properties may vary precisely due to the features of processing. Here are the main differences in bitumen and tar.

  1. Gudron is the residue after oil refining, but the second substance exists in nature. However, both of them are made on the basis of oil.

  2. Solid resins have a more multi-component composition. As a result, the properties and the scope of application is much wider.

  3. Sometimes Hudron is used for the manufacture of bitumen. It is impossible to make a reverse operation. A lot of chemical compounds add to Hudron to become hard and durable.

  4. Bitumen is used in large spheres of life than Hudron.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Both materials are made by oil, so externally they are very similar. The rest of the differences are quite a lot. Even applications are different.

Bitumen is known for many years, but Hudron appeared only during refining.

Differences between Hudron and Bitumen

Scope of application

Gudron is more often used for the manufacture of the most popular types of bitumen. And the substance is necessary in the production of fuel oil, minor coke, fuel for motors, combustible gases. Otherwise the scope of use is small. Hoods are used for insulation during roofing, for road cover.

Bitumen may be different types and production. By destination there are several most popular modifications. The price of varieties is also not the same.

At the same time, if compared with similar materials, the cost is the best, the most accessible.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

The scope of the use of bitumen depends on its type.

  1. Building. Substance is necessary for waterproofing. Used in the construction of a variety of structures, houses, buildings. The material is considered the best, has good quality at an affordable price.

  2. Roofing. Bitumens of this species are used in the production of rubberoid, Rubext, Pergamine, Hydrokhotloizol. And the material is necessary in the manufacture of mastic, primer, rubies. The substance also applies when creating bitumen paper and glass eels.

  3. Road. Such bitumen treated the road surface. So the tracks get a lot of useful properties, become more wear-resistant.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Bitumen in solid form is also used in some areas of the national economy. So, it can be found in the foundry, electrical fields. Use the resin to cladding the skin, wood and paper. The substance is used to protect against water. As raw materials are found in the manufacture of various varnishes and paints, as well as in the polymer industry.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

What else’s difference?

Gudron is manufactured by a chemical way, but bitumen is completely natural. The latter at the same time freezes and turns into a solid stone. But Hoodron is always viscous, fluid, even at low temperature. Bitumen is more used as a material. At the same time, tar in pure form often acts as raw materials.

Differences between Hudron and Bitumen

Differences between Hudron and Bitumen

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment