Characteristics of minit plates for baths and their application

Multifunctional facing material of the new generation Minyritis was invented at the end of the XIX century a native of Austria Ludwig Hatchekom. It is used for finishing facades, insulation of wooden walls from fire and elevated temperatures. Get it by pressing from a cement solution reinforcing fiber and mineral additives.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

Specifications

The bath can be attributed to fire facilities. As a rule, the walls for the bath are made of wood, the stove is built inside for heating to increase the formation of steam, a heater is added. In this case, reliable isolation of wooden walls. Due to the increased resistance to environmental impact, the minitis sheet is an indispensable insulating material for a bath.

It has sufficiently safe properties, as it does not have asbestos, and when heating does not allocate toxic substances for humans.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

In the plates from Minerita contains:

  • up to 60% cement,

  • 10% cellulose,

  • from 20 to 40% of minerals.

Depending on the required properties, components, fillers and dyes are changing.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

List the main technical characteristics of Minister.

  1. Fire resistance. Plates withstand temperatures from 150 ° C to 400-600 ° C, so refractory partitions are installed between the wooden walls and the furnace, and the furnaces on the walls are mounted.

  2. Ease, strength and durability. Under the influence of strong loads, the slabs are not deformed. Have increased impact resistance.

  3. Due to the combination of such components as cement and mineral fibers, the material has sufficient moisture resistance. Cement is resistant to damage to fungi and mold, prevents rotting and decomposition.

  4. Exhibits stability when exposed to aggressive reagents, acids and alkalis.

  5. Well absorbs sound, so it can be used for sound insulation.

  6. Naturalness and environmental friendliness, which guarantees the absence of harmful discharge when heated.

Characteristics of minit plates for baths and their application

Minitian plates are used not only as a refractory layer, but also in those places where decorative decoration is required near the fireplaces and stoves. For this purpose, textured plates having a kind of brick or stone masonry are made.

Decorative minister can have a different coloring, standard thickness of the decorative leaf of 8 mm.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

Application

Universal properties of a fibrotent plate determine its multifunctionality.

Fire resistance and resistance to high temperatures allows the use of minimit as an insulating material. Protective screens for a furnace from Minister “LV Sauna” are installed in the baths, saunas, near fireplaces and stoves. They provide complete fire safety rooms. With the help of minite sheets, they are shielded by protected pathways of people in the event of a fire appearing, as well as distinction of areas in the premises.

Characteristics of minit plates for baths and their application

There are a more thermal resistant version of Minister – Superisole. Such plates can withstand temperatures up to 1000 ° C.

Developed technology for mounting the surface of walls, ceiling, chimneys and ventilation strokes in rooms with increased risk of fire. Plates are installed on the frame from profiles. With a pretty close arrangement of the furnace to the wall, the protective screen is installed directly on the wall, leaving a small gap of 30 mm using ceramic sleeves. It will be a portal for air circulation between the protective stove and wood wall that does not allow wood overheating.

Resistance to impact and mechanical exposure is used in the device ventilated and non-ventilated facades. In this case, the plates of minorita take a double function of wind and water protection. These are the most overall sheets, they are usually produced in two categories – 90 and 120 centimeters wide and 2 m long.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

Universal plates with the designation xD are characterized by moisture resistance, durability, they are not afraid of temperature fluctuations.

Can be used for interior decoration of buildings and outdoor facing. Plates have a smooth surface to which finishing finish finish is easily applied. Along with polyurethane foam PPU, minit plates use, if necessary, create a very durable facade. Mineritis thickness HD can range from 3.5 to 10.5 mm. The most demanded sheets with a thickness of 8 mm.

Plates of facade are denoted by PC. This is a universal mineritis cooker, on the one hand, a layer of finishing primer is applied to it, acrylic paint is applied to another face. Facade minitis produced in 4 sizes.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

For facing facades, fibro-cement plates “Pastel”, having a perfectly flat surface treated with grinding method, and painted in different colors.

To protect balconies and loggias, use the MK slab, the main characteristic of which is increased strength and durability, moisture resistance and self-cleaning surface.

The ability to delay moisture and prevent the development of fungal infections “Aquabelk SP” slabs is used for waterproofing in shower cabins, pools.

Mineritis installation may be accompanied by additional trim, and moisture-resistant wallpaper, and can be used as an independent finishing material. Has many different colors coloring.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

What can be replaced?

It is not always possible to purchase minitian plates, especially this concerns the country villages and remote villages. Accordingly, the question arises: how to get out of the situation, and how can I replace the fibro-cement plate.

From a long time in the construction of the bath enjoyed local materials that were found at the place of settlement. The main characteristics for materials separating the stove from the wooden wall should be:

  • Low thermal conductivity,

  • safety.

Characteristics of minit plates for baths and their application

Among domestic budget replacement options – natural stone, brick. Among the more common materials can be used:

  • refractory drywall, penetrated by fiberglass, keeps the stove heating for 25 minutes, and fire up to 55 minutes;

  • A reliable option will be the installation of a stainless steel screen, using basalt wool layers;

  • Fiberglass is characterized by the absence of harmful resins evaporated with heating, easily mounted;

  • Another option is a terracotta heat-resistant tile, which is made from kaolin without dyes and chemical additives. It has good vapor permeability, able to withstand temperatures up to 1100 ° C.

Characteristics of minit plates for baths and their application

Characteristics of minit plates for baths and their application

How to kp?

Mounting plates from Ministerith does not require special preparation. This requires a conventional screwdriver and self-tapping screws. Consider how the installation scheme of the protective screen looks.

  1. To install minit plates in a protective screen, a metal profile is fixed on the wall and in the vertical, and in the horizontal direction. Mineritis leaf fixes on a metal profile using selflessness. For them, the screwdriver drills the holes in size more than the self-tapping screw. Ceramic sleeves are installed under the stove, about 3-5 cm high. Self-tapping screws are not fully clamped. Leave a small free course, to increase when heated. Fully self-tapping screws can only be consolidated after almost one-year screen operation.

  2. The second sheet of the future screen is attached by the same self-pressing, and again through ceramic bushings. Inside two sheets there should be a small emptiness to eliminate overheating of wooden surfaces.

Characteristics of minit plates for baths and their application

It must be remembered that installing furnaces in the bath closer than 0.5 meters cannot be.

Installation of the furnace in the bath right on the wooden floor is possible only with full insulation of wooden floor overlaps. Installation of minitite plates on brickwork, when bricks are not solid layer, but with gaps through which air ventilation.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment