Arbium Panels: Pros and Cons, Characteristics and Application

Every day more and more new materials appear for the construction of various buildings and structures. One of the most popular options for recent years are Arbolite panels and plates. Knowledge of the features of such products allows you to competently apply them and effectively solve basic construction tasks.

Arbium Panels: Pros and Cons, Characteristics and Application

Peculiarities

From ancient times, builders are continuously looking for an answer to the question – how to facilitate the walls of houses while maintaining their strength, normal heat and other valuable parameters? The emergence of each new type of wall materials immediately causes an excitement for this reason. Arbolite panels are distinguished by a number of positive sides:

  • they are environmentally safe;
  • Do not pass warm;
  • Effectively restrain foreign sounds;
  • allow for a decent air exchange with an external environment.

Arbium Panels: Pros and Cons, Characteristics and Application

Arbium Panels: Pros and Cons, Characteristics and Application

Arbium Panels: Pros and Cons, Characteristics and Application

Arbium Panels: Pros and Cons, Characteristics and Application

Wall blocks from arbolitis are manufactured by combining crushed wood and carefully treated cement. Such a combination allows you to achieve simultaneously:

  • considerable strength;
  • resistance to insects and microorganisms;
  • minimum thermal conductivity;
  • Resistance to exposure to open fire and strong heating.

Arbium Panels: Pros and Cons, Characteristics and Application

If the production technology is observed, the mechanical strength of the leaf arbium can reach 30 kg per 1 kV. cm. This material perfectly tolerates impact. His bending resistance can vary from 0.7 to 1 MPa. The difference is associated not only with the nuances of technology, but also with the degree of wear, with the peculiarities of the use of structural material in construction. As for the class of biological resistance, the material manufacturers guarantee complete immunity to pathological fungi, including any mold forms.

Arbium Panels: Pros and Cons, Characteristics and Application

It is worth noting that the arbolite sheets pass more heat than other familiar building materials, including brick and aerated concrete. Therefore, it is necessary to increase the thickness of the walls to compensate for thermal losses. Much more serious, however, another problem is a high level of moisture absorption. It can reach 75 and even 85%. Because of this, the properties of the arbolit can not be applied to the construction of walls entirely: the base has to be made from another material, while all the designs are carefully closed with decorative protection.

Arbium Panels: Pros and Cons, Characteristics and Application

A positive feature of Arbolita is its high vapor permeability. It allows you to maintain normal humidity in the house, even if there is a raw, wetting weather. The material is considered steadily carrying frosts (30 and even 35 cycles). Therefore, he is recommended for the construction of country daches and other buildings that have no permanent winter heating.

Arbium Panels: Pros and Cons, Characteristics and Application

Through the sip-panels from Arbolita seeps a minimum of sounds from 126 to 2000 Hz. Namely in this frequency range and there is a lion’s share of noise, so disturbing owners of private dwellings. Shrinkage of Arbolite Wall when compliance with construction technology is 0.4 or 0.five%. This level is completely uncritted for any residential building.

Arbium Panels: Pros and Cons, Characteristics and Application

Positive reviews of the owners of buildings from Arbolita are connected with their decent resistance to fire. In addition to weak flammability, this substance is slowly burning (even if it is possible to ignite it) and forms very little smoke.

Walls from Arbolita are well cut, worn and saw. They are easy to score nails, screw the screws or bolts. All this allows you to significantly accelerate repair and construction work. Since the designs are relatively easy, you can make a simple foundation with minimal materials.

Arbium Panels: Pros and Cons, Characteristics and Application

Stove Finish

When performing outdoor and interior decoration, it is necessary to avoid using materials and technological solutions that can cause damage to arbolic structures. Large pores characteristic of this type of construction blocks should certainly be covered with moisture from the outside. If this condition is not respected, the reliability of the wall will be under a big question. The specific type of protective and decorative coating every time they define individually.

At the same time take into account:

  • Type of construction;
  • Features of its use;
  • location of the object;
  • climatic and microclimate-generated load;
  • Possible and permissible construction costs or overhaul.

Arbium Panels: Pros and Cons, Characteristics and Application

Plaster – the main, and often the only option of the facing coating of arbite structures. If cement plaster is used, then on the usual (3 cm thick) the wall should be applied 2 cm of the coating. No matter how easy it seems to be, it creates a noticeable overall load. Therefore, it is impossible to ignore this moment, making up a project of the house as a whole and the foundation in particular.

Arbium Panels: Pros and Cons, Characteristics and Application

Also quite widespread plaster based on plaster and lime. If the limesers are used, the surface of any facade paint can be used. Many experts recommend plastering arbolit decorative mixtures. They are produced on the most varying basis, but all the couples are missing well without exception. This allows for the long-term service of the coating itself and the wall to which it is applied.

Arbium Panels: Pros and Cons, Characteristics and Application

Not necessarily, however, limit yourself with plaster. Arbolit can be covered with siding, clapboard or closed with a layer of brick. To note: if the brick is selected, there should be a gap in 4 or 5 cm between it and the main wall. Theoretically, you can refuse to use insulation. But still some developers apply mineral wool. Experience shows that it improves the thermal quality designs.

Arbium Panels: Pros and Cons, Characteristics and Application

Often Arbolite walls are covered with vinyl siding. Its panels on the characteristics are not different from the main material and the same “breathe”. Two more pluses of such a coating – aesthetic perfection and a cover from moisture. But it is necessary to fear the thermal destruction. Even the most good vinyl may be damaged due to temperature surges.

Arbium Panels: Pros and Cons, Characteristics and Application

Returning to the use of plaster for the decoration of arbolit, it is impossible to ignore the fact that it sometimes cracks. This is mainly due to violation of the production technology of work or with low quality Blocks themselves. It is undesirable to use raw panels, because their natural drying inevitably provokes deformation. You should also take into account the shrinkage of both building panels and a coupling solution. With strict compliance with technology, you can complete construction, as well as plastering the walls in one season.

Arbium Panels: Pros and Cons, Characteristics and Application

Manufacturers

Choosing suitable arbolic panels for the construction of carrying partitions or other structural elements, cannot be limited only to their size assessment. It is very important to take into account the reputation of manufacturers, compliance with the standard requirements.

Arbium Panels: Pros and Cons, Characteristics and Application

First of all it is worth considering Ivanovo products OKB “Sphere”. On the equipment of this company, dozens of other Russian factories produce arbolit, and this fact means a lot. No less high-quality blocks make in another enterprise from the Ivanovo region – in TPK “Pilim Boards”. This company has allocated for the so-called ripening of its products a separate heated room.

Arbium Panels: Pros and Cons, Characteristics and Application

Slightly less perfect, although large in the size of the panel, are manufactured in the vicinity of Dmitrov near Moscow. Tver LLC “Arbolit 69” just recently started work. But in the Arkhangelsk region, in the town of Nyandom, has been functions for several years LLC “Monolith”. There are blocks of special, “northern” format.

Arbium Panels: Pros and Cons, Characteristics and Application

Subtleties of application

Speaking about the construction of houses with their own hands from arbolite elements, it is impossible to ignore the features of their use. If you want to create a non-standard form design, trapezoidal and triangular panels are used. To make an accurate configuration and fitting under size, a disk stone saw. IMPORTANT: If the geometry is really complicated and persecuted, it is worth ordering products of the required format. It is cheaper and more reliable.

Arbium Panels: Pros and Cons, Characteristics and Application

Internal partitions are most often constructed from 20x20x50 cm panels. Special items are ordered to issue ventilation channels. When designing the overlap, it is advisable to make jumpers from blocks in the form of the letter U. Recommended envelope in this case – 50x30x20 cm. The masonry solution consists of 1 part of the cement and 3 parts of the sifted sand.

Arbium Panels: Pros and Cons, Characteristics and Application

Before installing the panels, the reinforcing belt of high-quality concrete is poured. Occasions of the belt cover plywood. Some experts, however, consider admissible formation of a hardening belt from similar blocks. In any case, you need to make backups. They fix the solution in the required position.

Useful recommendations and reviews

  • In almost every house there is a need to strobhide under the wiring recently erected arbium wall. The feature of the material is that this work can be performed by manual tools – chisel and hammer, but still it is advisable to use strokesis. Special tool allows you to achieve an unusually smooth line of shifts. Make the same manually by a perforator or a grinder almost impossible.
  • In addition to problems with wiring, many people are interested in the question of the decoration of Arbolit Plasterton. Inside the house it is quite possible. But it is required to create a reliable framework and crate. All nuances and parameters are calculated in advance, because the crate to transfer a significant load.

Arbium Panels: Pros and Cons, Characteristics and Application

Is it worth building a house from Arbolit or not – each decides for itself. Those who carefully approached the choice of material and study technology respond about this option positively. Houses built from arbium panels on a bunched ground, are little susceptible to destruction due to movement and almost not covered by cracks. It is worth noting that there are separate complaints about unpleasant odors. In addition, construction is worth paying special attention to waterproofing and drainage.

Arbium Panels: Pros and Cons, Characteristics and Application

About how to mount an arbolic slab, see the following video.

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment