All about the sizes of Minvati

Modern market full of diverse materials for insulation at home. One of the options for good insulation is mineral wool. It is advisable to get acquainted with its characteristics and species before it. It is necessary to choose the optimal option that will meet the stated requirements. The choice of minvats also affect its parameters, including length, width and thickness.

When dimensions are taken into account?

In construction it is difficult to do without insulation, because it is used in each of the spheres. When it is used, it is necessary to understand how much material will be needed for internal or external work. Therefore, it is necessary to know the Minvat of which sizes is represented by modern manufacturers. It is especially important to consider the dimensions of the insulation for work with flooring inside the buildings, as well as for the design of thermal insulation outside. At the same time, preferably before buying materials to make a pre-scheme. The parameters of the insulation is important to know to make a good heat shield that will fully comply with climate in the region. In addition, such data will significantly reduce the time when creating a estimate.

Without sizes of sheets, minvati will be difficult to insulate the floor or attic. As well as the values ​​of the dimensions of the insulation will help to build the right frame, which is necessary when working outside the structure. Knowing the length and width of sheets, they will be easier to install, as it will decrease on the cutting time, and there will be no superfluous joints.

All about the sizes of Minvati

All about the sizes of Minvati

Standard dimensions

Mineral wool has a standard plate size 1000×500 mm. However, each pack can go different number of sheets. Choosing the insulation, it is important to consider the density indicator. This parameter affects the endurance of mechanical loads and for deformation resistance. It is considered better if this indicator is above.

The sphere in which the Minvatu is better to use the hardness also depends on. Currently, manufacturers are presented by several options.

  • Lightweight, the density of which is 10-35 kg on m 3. Such a heater is used for frame structures as a sound insulation.
  • Elastic with a density of 35-120 kg on m 3 choose when you need to insulate the walls. It has comfortable sizes that are easy to cut under various configurations. Able to withstand small loads.
  • Hard possesses density, which varies from 120 to 180 kg per m 3, What makes it suitable for ventilation systems, baths, as well as for the heat shields of premises on production.

As a rule, Minvatu is chosen by width depending on the climate, which is different in different regions. So, in the fields in the south, they use sheets with a width from 120 to 180, and in the center – from 180 to 240 mm. As for the northern regions, sheets are suitable here only with a width of 36 cm.

All about the sizes of Minvati

Minvata is attached necessarily on the frame. At the same time, it has a number of advantages, among which high vapor permeability, no shrinkage and deformations when exposed to temperatures. Usually the standard size of such a plate plate is 1000x500x50 mm. For the inepar facades there is a variant with dimensions of 120x60x20 mm. For insulation, the ceiling is important to take into account the region of accommodation. The correct calculation of the necessary parameters can be made by using a special online calculator. Such a program, in addition to climatic features, takes into account the thickness of each layer of construction and thermal conductivity of the formation.

It is worth noting that the manufacturers of roofing insulation produce products taking into account the design of the roofs. For instance, Sheets 5500x1200x150 mm from KnaOF, 610x1220x50 mm from Paroc, as well as 1170x610x50 mm from ISOVER and 100x60x5 / 10 mm from Technoniscol, and for flat – 1200 / 1800×600 / 900/1200 mm from Paroc and others. For walls inside and outside, layers of minvati with a length of 1200 and 100 mm width. At the same time, the thickness should vary from 25 to 50 mm. It is necessary to clarify that mineral wool is suitable even for premises with high humidity, sandwich panels and facades with ventilation. When the facade minvat is stacked, use a horizontal or vertical method.

If overlaps are insulated from metal or reinforced concrete, then you can use sheets with a density of at least 150 kg per m 3. In the event that fire-prevention properties are important, it is better to choose a material that has a density from 200 kg per m 3. For insulation, the floor is perfectly suitable insulation with parameters 600 per 800 mm and with a density of 100 kg per m 3.

At the same time, the dimensions can be adjusted under the size of the area covered.

All about the sizes of Minvati

Dimensions of the insulation of different brands

Choosing Minvatu as a heater, it should be borne in mind that the sizes of the slabs will differ from each manufacturer. Materials from famous brands are most popular for consumers.

Knauf

This company maintains basalt and fiberglass. Insulation, usually presented in plates or rolls. Thermal insulation materials are suitable for partitions, ceiling and sound insulation. Parameters are determined by the series.

  • Acoustic represents a design consisting of 2 layers. Each layer has dimensions 7500x610x50 mm.
  • “Haemer” is a tiled minvatoo produced using 3D-elasticity technology. The length of the sheets varies from 1230 to 6148, width – from 610 to 1220, and thickness – from 5 to 10 mm.
  • “Cottage” is in the stoves and rolls and has a size of 1230 by 610 and 6148 by 1220 mm, respectively. In this case, the thickness of the material is 50 mm.
  • “Cottage +” is represented only in the insulation in the plates, the thickness of which is 100, length 1230, and the width is 610 mm.
  • The insulation series includes a tiled line “Thermoplit” with standard parameters 1250 per 600 mm and a rolled “thermal” – 1200×10,000 mm.

All about the sizes of Minvati

All about the sizes of Minvati

Isover

Due to the various technologies, the brand produces insulation in different variations.

  • The P-32 frame is characterized by 670 mm parameters, and the slab thickness may vary from 40 to 150 mm. Lists with a thickness of 75 and 80 mm are most popular.
  • The frame of P-34 has a standard length of 1170 and a width of 565 mm. As for the thickness, it can be from 40 to 200 mm.
  • Hard sheets of Minvati are presented with dimensions of 1550 by 1180 mm and with a thickness of 30 mm.

All about the sizes of Minvati

All about the sizes of Minvati

“TEKHNONIKOL”

Firm is engaged in the production of professional insulation. Minvata produced in the form of soft, semi-chairs and rigid plates. All sheets have a standard size of 1200×600 mm. Only thickness can change from 40 to 250 mm. The brand has several series, characterized by appointment:

  • “Rocklayt” is suitable for floors, various overlaps and mansard;
  • “Technovent” is created for the insulation of facades;
  • “Basalit” is intended for attic and all types of roofs.

All about the sizes of Minvati

All about the sizes of Minvati

Rockwool

The manufacturer represents non-combustible cotton wool with high moisture resistance in various series.

  • “Sauna” is a modification, foil aluminum. The thickness of the plate is in the range from 50 to 100 mm, the length is 1000, and the width is 500 mm.
  • “Light Scandik” – These are sheets of hydrophobized, presented in 2 versions: 1200x600x100 / 150 and 800x600x50 / 100 mm.
  • Light Made of 2 layers, which makes it optimal for internal insulation, for overlapping and roofing. Standard parameters: 1000x600x50 and 1000x600x100 mm.
  • “Flor” Due to high strength, you can use for floors on the ground, above the basements, on reinforced concrete grounds. All stoves of this series are performed in a single amount of 1000x600x25 mm.

All about the sizes of Minvati

Paroc

Finnish company for housing insulation releases a series of minvati series.

  • UNS 37 Suitable for walls and floors, dimensions are 1220x610x50 mm. In this case, the thickness can vary from 35 to 175 mm.
  • Inwall can be used for buildings of all types. Sheets have the following parameters: Length 1200 mm, Width 600, Thickness 30-250 mm.
  • Rob Designed for flat roofs and produced in 3 sizes: 1200-1800×600, 1200-1800×900 and 1800×1200 mm. Thickness fluctuates in the range of 20-30 mm.
  • Linio Suitable for facades that are plastered. Standard sheet length is 1200 mm, width – 600, and thickness – 30-250 mm.
  • GRS Created to cover floors of the first floor, basement, foundation. Sheet size 1200 per 600 mm. The thickness value is presented in the range of 50-200 mm.
  • “Extra” Perfect for frame structures and has the following dimensions: 1170x610x42 / 150, 1200x600x50 / 100 and 1320x565x50 / 150 mm.

All about the sizes of Minvati

All about the sizes of Minvati

Nuances calculating

To understand how much the material is precisely necessary for insulation, you will have to make some calculations and when you choose to adhere to a number of rules. On the packages of Minvati indicates the volume of the insulation in square meters. Based on this data, it is easy to understand how many rolls or sheets in fact will need. However, it must be borne in mind that the material is able to give a shrinkage, and this implies styling with. Will have to foresee this nuance in the calculations. In order to save money between lags, leave the distance equal to the width of the plate plus 1-2 cm. And the size of the material must be viewed directly on the package, as they can be very different from different firms.

For insulation of the home mineral wool, it is necessary to calculate the entire area, multiplying the length of the width. In the event that the building has a complex form, then it is divided into parts and find the area of ​​each of them. After that, the perimeter of the structure is calculated by summing the lengths of all of its sides and is multiplied by height. The resulting value must be multiplied by 2 to get the floor area and ceiling. Now both values ​​of the previously found areas are summarized. It remains to add another 15% on surplus and trimming. The resulting result shows quite accurately, how many meters insulation will need.

How many squares in 1 pack?

Packing Minvati is a different number of sheets. It turns out that the number of square meters of the insulation will be different. Each manufacturer has these parameters may be different.

For example, the Rockwool company has a Rockfasad series in the package of 1.2 m2 of the insulation, and “Rockvul Light Batts” – 20 m 2. The company TECHNONIKOL has packs of 8.7 m 2 and 4.3 m 2, at Paroc – 10.1 m 2, and ISOBOX is 12 m 2.

All about the sizes of Minvati

All about the sizes of Minvati

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment