All about self-lifting forests

Scaffolding is an important part of any large-scale object. Among these structures there are a large number of varieties, which is due to the specific conditions of those buildings where forests are used. Very interesting and fairly universal type are self-lifting analogs.

All about self-lifting forests

All about self-lifting forests

What it is?

Construction self-lifting forests are a specific design with mechanical parts. They, in turn, allow a person to rise and go down. The main part of the work takes the design, which is made of stamped steel. It is fixed in the lower and upper part in the lower and upper part on the lower and top of the bars, protruding the basis of the scaffolding.

And also this device is equipped with a special pedal, which is similar to the usual mechanical car jack. When pressed on it, a moving part of the self-lifter begins to push the construction, thereby changing the height of the forests.

Besides, You can adjust the design at your discretion: for example, consciously creating overcast for one side. The advantage of this type of forests can be called relative autonomy, which is the opportunity to work one.

All about self-lifting forests

All about self-lifting forests

If you need to go down, you only need to scroll through the lever, as a result of which the moving part will begin to move down gradually. All actions are performed only on two large bars and a blackboard on which the builder stands. At the same time, you do not need to move anywhere and drag the tools, paint, accessories or technique, which sometimes happens heavy and cumbersome. Due to the presence of a running bracket, you can quickly and safely rise and go down, which is very convenient for everyday construction in small and medium height.

Of course, Such scaffolding do not have large dimensions, if it comes to high-altitude objects. But there is also its advantage – self-lifting models are simple in setting up and operating. As for additional inventory, you can install a special grid that prevents the fall of items from the forests, or canopy from rain and snow.

All about self-lifting forests

All about self-lifting forests

The stability of the design is ensured due to the supports and the blackboard on which people are located. Fastening through the pins allows you to comfortably feel at an altitude of up to 3-3.5 m, after which the installation of additional thrust is desirable. It is a special pin to be removed and installed as height overcoming.

Among other features, you can note the possibility of setting small platforms for the working tool.

Self-lifting forests have become a rather popular device for the construction industry in Europe and North America due to its simple installation, convenient operation and versatility. The maximum height can reach 12 m. Among the disadvantages, you can note the low level of mobility, since each wall you need to move the design completely, but you can adjust its width.

All about self-lifting forests

All about self-lifting forests

Due to the principle of comprehension, the data of the structure holds much more reliable if the weight on the support becomes more. Simply put, the more heaviness from above, the stronger the construction is below. It is very convenient for those people who worry about the fact that forests can break. And among the advantages can be noted the opportunity to work one.

Load capacity of most models reaches 400 kg, so it is not necessary to worry about the location of the instruments, technicians, as well as the number of employees who can be up to 6-7 people. Having the optimal length of the horizontal board, you can work on wide walls, which speeds up work. Self-lifting forests are starting to be popular and in our country, where there are already several manufacturers.

All about self-lifting forests

Manufacturers

Pump Jack from Lestep known for its products in Moscow and Moscow region. When buying, you can choose the necessary height, as well as the number of additional fasteners that ensure the strength of the structure. The package includes anchor supports, prefabricated jacks, desktop consoles and mechanical installation itself.

All about self-lifting forests

All about self-lifting forests

Another manufacturer is Footlift from the company “Distal”. Products of the company has established itself on numerous construction and household facilities in our country. The kit includes:

  • lifting mechanism;
  • fencing;
  • Lower supports for different types of foundations (there are models like spikes and without).

In addition, the spacer attachment and stainless fasteners are provided.

All about self-lifting forests

All about self-lifting forests

Operating recommendations

Assembly is several stages. First you need to collect the wall focus with the help of nuts and bolts, which are in configuration when buying. After that, the bottom support (instructions) is mounted. Next, the driving mechanism is installed along with the jack and the handle, which will allow you to move the design up and down. Fully assembled mechanism is installed on the poles, fixing all the necessary pins and sleeves.

After a certain period of operation, you should tighten the connecting threads, as well as check all the components of the structure.

All about self-lifting forests

Rate article
( No ratings yet )
Share to friends
Rebuildhom.info - construction and repair, dacha plot, apartment and country house, useful tips and photos
Add a comment