Concrete mixer is an important element of any small building when it comes to cooking a solution in the desired quantity without much. The technique of such a type is made by domestic companies, among which you can note the company “Stroymash”.
Products “Stroymash” has its own characteristics.
- Simplicity. Technique is not equipped with complex functions, performing only the main purpose – the manufacture of the mixture. You can use such concrete mixers without experience, it is enough to get used to the workforce.
- Reliability. And although the technique is located on the domestic market for many years, it does not lose its basic qualities, among which there is a high reliability.
- Wide model range. You can choose a concrete mixer according to the technical characteristics and the desired price. The range of the cost of the device is quite wide and is available to the usual buyer.
In addition, it should be said about the availability of particularly powerful models, therefore there are aggregates for large construction companies that operate on projects of various volumes.
SBR-120 – one of the most popular models of 120 liters, which finds the use in domestic construction in its own section. The volume of the finished solution reaches 50 liters, the engine power is 700 watts, which is enough for such equipment. Food is carried out from the network of 220 V, the cast-iron crown makes the design more wear-resistant and reliable. There are transport wheels, and the weight of this concrete mixer is 50 kg. Small dimensions of the model are combined with its performance and ease of operation.
MS-160 – simple concrete mixer with a volume of 160 liters, of which 80 l are a ready-made solution intended for use in place. Power is 700 W. The key difference from the previous model is an increase in weight to 60 kg, which is caused by greater capacity. The design has not undergone special changes – everything is the same as a simple technique with transport wheels.
MS-180 – unit, which fully complies with MS-160, but has changes in the parameters of the volume and total weight of the device. The total volume of concrete mixer is 180 liters, of which 96 liters are a ready-made mixture. At the same time there was an increase in weight per 1 kg, which is not so essential, if compared with previous characteristics. The performance remained the same – the electric motor with a capacity of 700 W.
MS-200 – another concrete mixer from the MS series, which is similar to other category units. The volume of the mixer in 200 liters and the finished solution in 110 liters required additional power, so the manufacturer equipped the equipment with an electric motor for 1 kW. This improvement made it possible to increase the productivity of the workflow. As for the dimensions, they were also changed. The weight of the device is 66 kg.
SBR-220-01 – construction unit, which most often finds use in large projects due to the large volume of the mixer in 220 liters. Ready solution is 120 liters. With small volumes of work, one kneading may be enough for quite a long time. The existing electric motor in 800 W makes the workflow slightly tedious in terms of waiting, but in general the power of this model allows it to be productive.
As for the weight, it equals 125 kg, which may cause difficulties when moving this model in the construction site. Considering the quite affordable price, the SBR-220-01 can be called a good choice if there are restrictions on the budget, but a concrete mixer with a mixer of high volume is necessary.
Since concrete mixers have an electric engine, you need to carefully take on the operation of electrical engineering techniques. In the event of a network cable malfunction, you should turn it off from the outlet. Before working, you must check the technique for visible defects. It is very important not to change the source design, otherwise the manufacturer cannot guarantee the safety and reliability of its product.
Before you load a dry mix, you need to turn on the unit for uniform mixing it. Water is added after stirring dry components. When stirring the solution, its readiness is visually determined, and the consistency is adjusted by adding dry components or water. It is necessary to comply with the safety technique during the operation of rotating mechanisms, to ensure that hands or clothes are accidentally clamped in the elements of the rotating mechanism.
After emptying the mixer and the end of operation, the inner cavity and the mixer must be cleaned and washed from the residual residues (or concrete). Network cable remove out of the outlet.
Buyers most reviews consider construction mixtures “Stroymash” a reliable and safe product with convenient operation. Simple design allows you to use these aggregates without any special knowledge in the field of technology and construction. In addition, the plus is considered to have a clear instruction on the description, assembly and operation of the device. And more users like the availability of equipment that is at an affordable price.
Among the disadvantages, it is possible to note the fact of some single model range, which differs only in several characteristics, mainly by the volume of the mixer, weight and engine power. Because of this, some users consider Concrete mixers of “Stroymash” of the same type and narrow-controlled.